Datto Networking Edge Routers Alternatives

Remain connected with high-performance routing, including built-in firewall, intrusion detection, and fully-integrated 4G LTE failover. Datto Networking’s cloud-managed Datto Networking Appliance (DNA) and D200 Edge Routers combine high-performance routing, firewall, web content filtering and fully integrated 4G LTE Internet failover, everything needed to deploy a network for SMB clients. The stateful firewall and the DNA’s intrusion detection and prevention help enhance the security of the network.

The HPE FlexNetwork MSR1000 Router Series delivers high-performance, small branch routing up to 500 Kpps in a cost-optimized modular form factor. Featuring integrated routing, switching, security, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With Comware v7 and a convenient modular design, the HPE FlexNetwork MSR1000 brings enhanced performance and advanced services, as well as a choice of connectivity options to provide flexible, open standards and lasting investment protection with lower CAPEX and OPEX for small-sized branches. Up to 500 Kpps IP forwarding; converged high-performance routing, switching, security, voice, and mobility. Embedded security features with hardware-based encryption, firewall, network address translation (NAT), and VPNs. Supports OpenFlow that enables integration with mainstream cloud platforms or a third-party controller for flexible network customization.

The HPE MSR4000 Router Series deliver high-performance large branch routing with up to 36 Mpps in a cost-optimized form factor. Featuring integrated routing, switching, security, VPN, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With the Open Application Platform module, the MSR4000 Router Series offers a wide range of virtualized applications. Its distributed, modular architecture and high reliability also strengthen the resiliency of large branches. Enhances security with built-in IPS and optional HPE IPS filter subscription, as well as a zone-based and stateful firewall. OpenFlow facilitates Software-defined Networking (SDN). WAN optimization and Intelligent Resilient Fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN, and VPLS. Fiber LAN switching and high-density E1/T1 modules. The HPE MSR4000 Router Series simplifies your network through integrated routing, switching, security, voice, etc.

Get increased mobility and next-generation WAN and LAN options. Access Ethernet, DSL, 5G, and 802.11ax Wi-Fi. The 1000 Series is ideal for use as customer premises equipment (CPE). Automate deployment, configuration, and management of the 1000 Series with Cisco vManage. A centralized, highly visual dashboard simplifies and extends controls across the SD-WAN fabric and to the cloud edge. Gain enterprise-class security. Cisco Umbrella, Encrypted Traffic Analytics, and advanced threat defense provide high-performance encryption, VPN, firewall, and URL filtering. Cisco Trust Anchor technology protects your network firmware from threats. The 1000 Series are the first fixed-configuration routers with the trusted Cisco IOS XE Software. Cisco IOS XE Software is optimized for cloud connectivity, enhanced visibility, and full-stack security, with robust multicloud capabilities.

The HPE FlexNetwork MSR2000 Router Series delivers high-performance, medium branch routing up to 4 Mpps in a cost-optimized modular form factor. Featuring integrated routing, switching, security, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With its convenient modular design, the HPE FlexNetwork MSR2000 Router Series offers a choice of connectivity options to provide flexible, open standards and lasting investment protection with lower CAPEX and OPEX and is ideal for medium-sized branches. Up to 4 Mpps forwarding; converged high-performance routing, switching, security, voice, and mobility. Embedded security features with hardware-based encryption, firewall, NAT, and VPNs. Integrated 1/10 GbE WAN and LAN, fiber (SFP). No additional licensing complexity; no cost for advanced features. Zero-touch solution, with single-pane-of-glass management.

The HPE MSR95x Router Series delivers high-performance, small-branch routing in a single, cost-optimized form factor. Featuring integrated routing, switching, wireless, security, and voice with no additional licensing, boost your service delivery while simplifying the management of the corporate-wide area network (WAN). This series is flexible to deploy, with Zero Touch Provisioning and WAN options with LTE connectivity. With Comware v7 and fiber connections, the MSR95x also brings the performance and advanced services available on modular routers, such as IPS and high encryption, to a fixed port form factor. Converged high-performance fiber routing, switching, security, and 3 Mpps performance. Integrated 1/10GbE, WAN and LAN, fiber (SFP). Integrated 4G LTE, 3G as well as IEEE 802.11b/g/n WLAN in one box. Embedded encryption, stateful firewall, NAT, ADVPN security features. Inified Comware v7 OS, Comware v7 OS zero-touch solution, and single-pane-of-glass management.

The HPE HSR6800 Router Series is a family of high-performance, multiservice routers designed for data center interconnection, enterprise WAN core, campus WAN edge, and high-speed WAN aggregation services. It runs the Comware operating system and features an advanced multi-core, distributed service processing hardware architecture that scales up to 420 Mpps forwarding and up to 2 Tbps switching capacity. The router delivers robust routing, multicast, Multiprotocol Label Switching (MPLS), IPv6, security, quality of service, carrier-level high-availability features, and high-density 10GbE and 1GbE interface options. Fully modular Comware v7 network operating system offers improved performance and system availability. Feature enhancements including ADVPN, IRF2, EVI, EAA, and ISSU. FIP-240 doubles FIP-210 forwarding performance, up to 4 HIM/MIM slots. Line cards offer 1GbE combo/10bGE ports, and increased IPsec performance. RT-HIM-2EXP doubles HIM 10GbE port density and supports SFP+.

The Cisco® 900 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as Customer Premises Equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. The Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro Ethernet and wireless LTE WAN connectivity. Service providers offering both managed Ethernet and wireless LTE WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.

NCS 5700 line cards and routers bring scalability and flexibility to provider networks. Integrated Segment Routing supports performance-based service offerings and high-density 400G ports provide long-term network growth. Scale with demand with flexible port configurations from 10G to 400G and available 3.6, 4.8, 7.2 or 9.6 Tbps per slot line cards. Converge all services onto a single infrastructure and use Segment Routing for end-to-end granular traffic control that delivers the best client experience. With backward compatibility, a flexible pay-as-you-grow model, and IOS XR throughout the network, this platform offers long-term growth that scales with demand and protects investment. Power efficiency and scalability with a carrier-grade network operating system to rightsize the network footprint and lower your carbon impact.

The 7210 SAS product family provides the deployment flexibility, service richness and reliability you need to extend segment routing, IP/MPLS, and Carrier Ethernet to the access points of your network. With a wide variety of platforms, it is used for business VPN, residential broadband, demarcation, and mobile backhaul, and is also widely used in industry, public sector, and enterprise applications. Ready your network for future growth with high-density GE and 10GE interfaces, 100 GE uplinks, and up to 2 Tb/s throughput. Offer competitive services based on high availability and quality of service. As a member of the industry-leading Nokia Service Router product portfolio, the 7210 SAS runs the Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform (NSP) for high-performance, end-to-end service delivery and management and carrier-SDN integration. 7210 SAS supports differentiated services, including Carrier Ethernet, IP VPN, and enhanced services.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature, a power injector on Ethernet port 10, it can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! The maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports.

The Nokia 7705 SAR delivers legacy TDM and advanced IP/MPLS services making it ideal for industries, enterprises and governments and for niche applications in IP anyhaul networks. The 7705 SAR provides an easy migration path from TDM networks. With depth in routing protocols, service scaling, security, and timing, it meets the rigorous demands of mission-critical networks. It is available in multiple compact platforms that reduce equipment footprint and energy costs. These platforms deliver highly available services over a wide variety of network topologies. Strong QoS capabilities deliver customer satisfaction and the ability to differentiate service levels. As a member of the industry-leading Nokia Service Router product portfolio, the 7705 SAR runs the Nokia Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform for high-performance end-to-end application delivery and management.

The HPE MSR3000 Router Series feature a modular design that delivers unmatched application services for medium to large branch offices. These routers offer Gigabit switching, provide an enhanced PCI bus, ship with the Comware v7 OS, provide a full-featured resilient routing platform including IPv6 and MPLS, offer up to 13 Mpps forwarding capacity and 14.3 Gb/s of IPSec VPN encrypted throughput to ensure high performance with concurrent services. With the Open Application Platform module, the MSR3000 Router Series offers a wide range of virtualized applications. Its distributed architecture and high reliability also strengthen the resiliency of medium to large branches. The MSR3000 series provides an agile, flexible network infrastructure that enables you to quickly adapt to changing business requirements while delivering integrated concurrent services on a single, easy-to-manage platform.

PTX Series Routers form the foundation of the world’s largest core and peering architectures. Powered by the latest generation of Juniper’s custom Express family ASICs, they’re cloud-optimized to enable smooth 400G migrations. They simultaneously deliver the scale, flexibility, and investment protection needed to meet today’s market needs. The routers offer native 400G inline MACsec, flexible filtering, and a reliable network operating system that has been powering generations of high-performance solutions. Discover what 100G and 400G mass scale in the cloud can offer with PTX routing. The modular PTX10004, PTX10008, and PTX10016 Packet Transport Routers directly address the massive bandwidth demands being placed on networks. They bring ultra-high port density, native 400GbE in-line MACsec, and latest-generation ASIC investment to the most demanding WAN and data center architectures.

Extend your network visibility, rapidly pinpoint issues, get faster resolution, and actively manage the performance of what matters. Extend your visibility across the internet, the cloud, and SaaS. You can pinpoint application issues and gain actionable insights with Cisco ThousandEyes integration on selected ISR 4000 Series models. Configure and monitor your network and enforce business policies through Cisco DNA Center and Cisco SD-WAN. Simplify network automation and turn hours of work into minutes. Protect your branch site across the LAN and WAN and in the cloud with security integrated into the router. You no longer need a separate security appliance. Deploy key integrated network services for your branch in minutes, virtually or on-premises, without sacrificing performance.

The Cloud-Native Router takes full advantage of container economics and operational efficiencies, giving service providers the flexibility they need to deploy 5G. The performant, software-based router combines Juniper’s proven routing technology, the Junos OS containerized routing protocol daemon (cRPD), and Contrail vRouter DPDK forwarding plane for x86 processors. It integrates seamlessly with the Kubernetes Container Network Interface (CNI) framework. The router complements Juniper’s physical routers with advanced networking features for cloud-native environments where space, power, and cooling are limited. Based on the same Junos OS routing technology, hybrid physical and virtual networks provide a single experience end to end. The Cloud-Native Router is a key component in the 5G Distributed Radio Access Network (D-RAN) and in 5G Core data centers hosted in hyper scaler cloud environments.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, USB, LCD, PoE out on port 10, 600MHz CPU, 128MB RAM, RouterOS L5. The RB2011 is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, USB, LCD, PoE out on port 10, 600MHz CPU, 128MB RAM, RouterOS L5. The RB2011 is a low-cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring - are just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five fast Ethernet LAN ports, but also has RJ45 serial port, USB port, and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present.

Edge networks serve billions of devices with low-latency services. You need feature rich routers that economically scale with bandwidth demand. The ASR 9000 series is your edge routing device capable of supporting the application performance required to power 5G service needs. Enhanced security including Secure Boot, Cisco Trust Anchor, and anti-counterfeit measures. With a Secure Development Lifecycle to ensure manufactured integrity. Investment protection for ASR 9000 with continued software and hardware innovations. Custom ASIC optimized to balance performance with a 100x capacity increase and a 96% power reduction per Gbps. With real-time telemetry, segment routing, and Ethernet Virtual Private Networks (EVPNs).

The Nokia Virtualized Service Router (VSR) is a highly flexible virtualized IP edge router designed and optimized for telco cloud environments. It enables rapid service innovation while lowering operating costs. With the VSR, service providers can extend service reach, open new markets, and accelerate time to market. The VSR supports a broad and rich set of virtualized IP edge applications, and virtualized network functions (VNFs) to support mobile, business, and residential services. Based on the Service Routing Operating System (SR OS), the VSR delivers high performance and elastic scalability for x86 server environments. The VSR supports the highest levels of reliability and resiliency. It also offers flexible management options – from working with open frameworks to delivering OpenStack®-integrated VNF management and element management capabilities with our 5620 Service Aware Manager (SAM).

The Peplink UBR Series offers unbreakable connectivity right out of the box, providing a simple and effective solution for achieving highly reliable network connectivity. Designed to enhance network speed and reliability, the UBR Series allows users to connect to multiple mobile networks simultaneously, ensuring optimal performance and minimal downtime. The routers in this series feature concurrent multi-network connectivity, enabling seamless switching between different mobile networks as needed. Additionally, the UBR Series incorporates Peplink's SpeedFusion technology, which offers hot failover and WAN smoothing capabilities, further enhancing the stability and resilience of network connections​.

The Network Convergence System (NCS) 6000 helps enable superior network agility, packet optical convergence, and petabits-per-second system scale. It facilitates the Cisco Evolved Programmable Network to support virtualization and programmability at low total cost of ownership and delivers high-bandwidth mobile, video, and cloud services to end users. Innovations include Cisco nPower X1 NPUs, hardware-enabled true zero-packet, zero-topology loss ISSU, capability to scale beyond 1 petabit in a multi-chassis configuration, enhanced operations support, and packet-optical integration. Use an adaptable power consumption model for both the ASIC and CMOS photonics technology for the lowest carbon footprint in service provider routing today. Easily adapt each line card's power consumption to the number of ports used.

The Peplink MAX HD Series consists of heavy-duty, multi-cellular routers that are designed for mission-critical connectivity. These powerful cellular routers deliver unbreakable connectivity and high-speed performance, making them ideal for use in demanding environments. A key feature of the MAX HD Series routers is their ability to connect to all available network operators within a country, ensuring reliable and uninterrupted connectivity. Additionally, the routers offer concurrent multi-network connectivity and are equipped with multiple SIM card slots for multiple radios, providing enhanced flexibility and redundancy for users​.

Huawei NetEngine 8000 series routers provide an all-service, intelligent router platform designed for the cloud era. Using ultra-broadband pipes to construct simplified networks, and Segment Routing (SR) and Segment Routing over IPv6 (SRv6) protocols to establish intelligent connections, NetEngine 8000 combines with Huawei's next-generation Network Cloud Engine (NCE) to implement full-lifecycle automation and proactive Operations and Maintenance (O&M). An intent-driven approach frees customers from unnecessary constraints, unleashing network potential. Available in a range of form factors and applicable to core, aggregation, and access networks, the award-winning NetEngine 8000 offers high performance and reliability, with low power consumption and full evolution capabilities. Applications include functioning as a core node for an enterprise Wide Area Network (WAN), as an access node on a large enterprise network, as a Data Center Interconnect (DCI) node.

The Peplink MAX BR Series is known as the best-kept secret in business rugged connectivity, offering sturdy and reliable cellular routers that provide excellent value. These routers can be used as either primary or backup routers for businesses, and they are equipped with seamless VPN failover capability to ensure uninterrupted network connectivity. Common features of the MAX BR Series routers include hot failover, advanced network management and GPS tracking, as well as a solid hardened design that makes them suitable for demanding environments. Additionally, the routers are full-function mobile routers, delivering a comprehensive set of features to meet a wide range of networking needs​.

Cisco® 8000 Series routers complete this journey. They deliver provider-class routing functionality at unmatched density, performance, and power. This enables Cisco 8000 Series to be deployed into an unprecedented range of routing roles – all supported with a single ASIC architecture and operating system – thus streamlining qualification, deployment, and operations. The Cisco 8000 Series combines the revolutionary Cisco Silicon One™, IOS XR® software, and a set of clean sheet chassis to deliver a breakthrough in high-performance routers. The 8000 Series comprises a full range of feature-rich, highly scalable, deep-buffered, on-chip High Bandwidth Memory (HBM) and 400 Gigabit Ethernet (GbE)-optimized routers ranging from 10.8 to 25.6 Tbps in a 1 RU footprint. It is also available in an industry leading, rack-mountable modular system capable of 518.4 Tbps of full-duplex, line rate forwarding.

Cisco ASR 1000 Series Aggregation Services Routers provide a Software Defined WAN platform that aggregates multiple WAN connections and network services including encryption and traffic management, and forward them across WAN connections at line speeds from 2.5 to 200 Gbps. The routers contain both hardware and software redundancy in an industry-leading high-availability design. The latest additions to the Cisco ASR 1000 Series are the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router. Both new routers support up to 100 Gbps in a 2-Rack-Unit (2RU) and 60 Gbps in a 1-Rack-Unit (1RU) form factor, respectively. The ASR 1002-HX has 8 built-in 10 Gigabit Ethernet (GE) ports and 8 1 GE ports, with the Ethernet Port Adapter (EPA) slot for expansion. The ASR 1001-HX has 4 built-in 10 GE ports, 8 1 GE ports, and 4 configurable 10 GE or 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 is the newest addition to the modular control plane engines in the Cisco ASR 1000 Series.

For industrial settings where reliability, flexibility and secure systems are critical, Belden’s routers deliver a simplified solution with performance and security in one product. Compliant with IEC 61850, the routers are ideal for large substation installations or similar applications where hardness, performance, security, quality of service and diverse protocols are required. Advanced routing & security, combined capabilities of L3 switching and WAN routing. Expandable & Modular: All gigabit ports with 4-port up to 10-port GbE LAN options in configurable slots. Legacy infrastructure interfacing, support for legacy T1E1 and DDS interfaces, and non-Ethernet communication.

Enable a variety of WAN connections, including xDSL, Ethernet, 3G/4G LTE, and fiber. The series offers a range of performance levels to meet your needs. Get voice, video, wireless, and data in one integrated router and switch. This desktop form factor is priced affordably for small and midsize businesses. Encryption, VPN, firewall, and URL filtering are all built in. These security features help you protect your customer experience and data. Easily manage the 800 Series with drag-and-click interfaces on your premises or with third-party web-based applications.

Truffle is a Broadband Bonding router appliance that combines and intelligently manages several (2 to up to 16) Internet transports (such as MPLS, DIA, DSL, cable, fiber, satellite, 4G LTE or 5G) from any of service provider. Truffle monitors, detects, and adapts to the fluctuations in your ISP performance as well as your changing traffic profile. This means Truffle will solve the network problems automatically and will avoid interruptions to your Internet services and applications. Truffle provides the ultimate way to add additional bandwidth to your network when you need it. Simply plug in additional broadband lines to increase your network capacity cost-effectively. Relying on a single service provider will limit network SLAs to that single service provider. You can get the best of all worlds by aggregating service providers to build your own, best-in-class bandwidth, leveraging cable modem’s bandwidth, DSL’s dedicated last-mile transport, and low latency of MPLS.

Our NetVanta 3000 Series of fix-port access routers are perfect for carrier-bundled service offerings, and enterprise-class internet access for secure, high-speed corporate connectivity. There are two distinct platforms, the NetVanta 3140 and 3148. The NetVanta 3140 Series supports 100Mbit/s routing performance in a small form factor. The NetVanta 3148 Series supports up to 500Mbit/s routing performance and offers an additional GbE interface, two of which can be fiber-fed. It also features an 8-port Ethernet switch, which can be PoE enabled. Our NetVanta 3140 Series offers two distinct form factors: one is a plastic desktop chassis, while the other is a metal enclosure that can be easily rack mounted. Each device features three routed GbE interfaces and one USB interface for 3G/4G/5G access and supports 100Mbit/s routing performance. VPN and special voice monitoring services can also be added as an optional upgrade.

The ASR 900 Series is a modular aggregation platform that delivers cost-effective converged mobile, residential, and business services. You get redundancy, a shallow depth, low power consumption, and high service scale in routers packed with useful features and optimized for small aggregation and remote point-of-presence (POP) applications. Deliver a greatly enhanced broadband customer experience. This series supports broadband aggregation for voice, video, data, and mobility services. It supports thousands of subscribers, and QoS scales to a large number of queues per device. Deployed as a pre-aggregation platform for mobile backhaul, the series can aggregate cell sites and use MPLS as a transport for RAN backhaul traffic. Get the timing services required in today’s converged access networks. The series offers integrated support for a variety of interfaces and can act as the source for network clocking for GPS and other interfaces.

Our NetVanta 4000 Series is ideal for carrier bundled service offerings up to 1Gbit/s, and enterprise-class internet access for secure, high-speed corporate connectivity. Several variations add power over Ethernet (PoE) to the built-in switch, VPN and/or special voice monitoring services. All our NetVanta 4000s can also provide eSBC functionality, delivering a truly converged application platform at the customer premises. What’s more, they can grow via software as your VoIP services expand, supporting up to 1000 calls. Our NetVanta 4148 provides four routed, autosensing Gigabit interfaces, two of which can be fiber-fed, and an 8-port Gigabit Ethernet switch. The Gigabit interfaces can be LAN or WAN-facing and are ideal for Ethernet redundancy with immediate failover if one of the links goes down. Part number 17004148F1. Our NetVanta 4148 with enhanced feature pack upgrade adds the ability to support 500 VPN tunnels.

Traditional branch gateways leave you cobbling together many solutions. But the Nodegrid Hive SR is your 5-in-1 branch gateway that makes edge networking simple and flexible. Gain turnkey convenience on first boot, with open architecture and next-gen out-of-band that let you fully customize and control everything at the edge. Get a low-cost solution that offers speed & power out of the box. Gain 5-in-1 capabilities to reduce CAPEX & OPEX. Control everything with ZPE’s signature next-gen out-of-band. Nodegrid Hive SR’s built-in gateway profile means you don’t have to manually deploy separate boxes. Just boot up, and the HSR automatically configures routing, switching, and firewall. No more long deployments or juggling hardware stacks. The Hive SR is the first 5-in-1 gateway with open architecture, so you can consolidate and fully customize your environments. Get SD-WAN, security, compute, NetDevOps, and out-of-band in one box, and deploy virtualized solutions of your choice.

The NCS 500 Series offers a secure and highly available access-routing platform for service providers. Both fixed and modular form factors support advanced automation and programmability to provide 5G, Remote PHY, Carrier Ethernet, and FTTx. The NCS 540 and NCS 560 are built for 5G with advanced timing, ultra-low latency, and ultra-high capacity. They provide the foundation for pervasive Mobile Broadband (MBB), massive IoT, tactile Internet, smart cities, and AR/VR. Build application-aware networks with segment routing, open and programmable interfaces using NETCONF and YANG data models and APIs, and real-time visibility with streaming telemetry. Intelligently converge network services onto a single platform with the highly scalable and energy efficient NCS 500 Series. Flexibly scale capacity with ports that support 1/10/25/40/100 GbE.

Compatible with cellular frequencies around the globe, the OWL 4G family is specifically designed to support next-level security and round-the-clock cellular connectivity across virtually any environment. Its edge computing configuration allows industrial customers to monitor and troubleshoot machines remotely, without going on-site. These features, along with its web interface that enables advanced customization, make the OWL 4G family a flexible solution for many different applications. High-speed wireless connectivity and reliable remote access, with technology specifically designed to enable IIoT or machine-to-machine (M2M) communications. Highly customizable based on application needs, with an intuitive web interface and open Linux platform. Enhanced security functionality, with secure VPN tunneling (OpenVPN and IPsec VPN). Industry 4.0 and Industrial IoT Cellular Router and Gateway. Optimized for 4G applications with edge pre-computing. VPN and programmable extendable Linux.

Get safe and flexible SD-Branch virtualization with the Cisco hypervisor network function virtualization (NFVIS) and routing virtual network functions (VNFs). Centrally manage your environment with Cisco vManage. Get actionable insights across the internet, cloud, and applications with built-in Cisco vAnalytics and Cisco ThousandEyes solutions. Reach new levels of automation and transformation with support for the latest digital services and chaining. Build a faster, more reliable network fabric with support for the latest link types. Cisco SD-WAN modular router for the small and lean virtualized branch.

The Session Smart™ Router powers Juniper’s SD-WAN solution that’s designed to connect users with exceptional experiences. Built on an application-aware and zero-trust secure network fabric, it meets the most stringent enterprise performance, security, and availability requirements. The router overcomes inherent inefficiencies of conventional solutions with a tunnel-free architecture that enables improved performance, fast deployments, and cost savings. The software solution can run on customer premises equipment (CPE), on data center network servers, and in the cloud for flexible deployments. It is centrally manageable using the AI-driven Juniper Mist™ cloud or the Juniper Session Smart Conductor platform. Application-aware routing, fail-safe service delivery, orchestration and automation, zero trust security, and centralized management using the Juniper Mist Cloud or Session Smart Conductor.

The Nodegrid Link SR brings flexibility to your network operations. Its powerful components deliver customizable networking wherever you need it, while its compact design can be tucked away to save crucial space. Link server rooms, closets, and branch locations to the internet, and get critical services to keep your network running. Deploy fast using zero-touch provisioning and ZPE Cloud. Stay in control even during outages with OOB via cellular failover. Manage every device thanks to vendor-neutral Nodegrid Manager software. Deploy the Link SR to provide routing, security, failover, and other services. The Link SR features PoE for versatile power options, and can even serve as a reliable Wi-Fi access point using dual antennas. It features the Nodegrid OS running on powerful x86 architecture, bringing the network function virtualization, out-of-band management, and automation capabilities you rely on.

High-performance ACX Series Routers serve metro access, aggregation, and data center use cases. They are energy-efficient, MEF 3.0 compliant, and support 5G high-precision timing and synchronization. The latest ACX routers, the ACX7000 family, are multiservice routers ideal for cloud metro deployments. Select ACX7000 platforms that incorporate adaptive power innovation that saves you between 20 and 50 percent in energy costs. Paragon Active Assurance and zero trust security are embedded for assured, secure service experiences, and Juniper Paragon™ Automation support reduces device onboarding time from hours to minutes. The ACX7024, part of the ACX7000 family, provides industry-leading access performance in an industrial-rated, dense, and compact 1 U footprint. Ideal for service providers, enterprises, and wholesale services, it helps operators deliver premium customer and user experiences.

The Nokia 7750 Service Router (SR) portfolio delivers unrivalled performance, scale and versatility for the full array of IP edge and core applications. Communication service providers, cloud, public and private network operators the world over rely on our innovative technology to power their mission-critical networks and services. The Nokia 7750 SR portfolio includes the 7750 SR-s series, 7750 SR series, the 7750 SR-a series, and the 7750 SR-e series. The 7750 SR portfolio offers the scope and flexibility to optimize your IP edge and core applications on a common platform without compromises. Featuring our ground-breaking FP routing silicon and proven Service Router Operating System (SR OS) it addresses a wide range of network functions and services. Scales system capacity up to 432 Tb/s with the flexibility to optimize any network location. Leverages the Nokia FP4 and FP5 network processors to provide deterministic packet forwarding performance at scale.

AirLink routers are engineered to be deployed out-of-the-box without additional programming and have the intelligence to stay connected. The Performance Series of routers are designed for customers who demand the best for mission-critical applications in extremely harsh indoor, vehicle or exposed outdoor locations. They provide the ultimate combination of secure, cellular LTE and Wi-Fi performance, with high availability and network agility in a ruggedized form factor. Industry’s highest-performing 5G router, purpose-built for vehicles. Future-proof, cartridge-based design for additional functions and features. 5 ethernet ports and dual 4X4 MIMO Wi-Fi 6. Remote device management and mobility-focused reporting through AirLink Premium. Single-radio 5G router for fixed applications. Easily expand to dual-radios and to add more functionality with the cartridge-based design. 4 ethernet ports and 5x4 MIMO Wi-Fi 6. Remote device management through AirLink Complete.

Whether you’re in telecom, retail, or oil & gas, deploy the Bold SR for the functionality & control you need. This lightweight box allows you to connect more than a dozen devices & add-ons, so you can deliver robust capabilities throughout your enterprise. The Bold SR puts you in charge with remote out-of-band management, Secure Access Service Edge, and SD-Branch capabilities. Reduce CAPEX & virtualize your stack. Cut support costs & response times with remote out-of-band. Set up autonomous networking to prevent downtime. Secure your branch networks and more using the Nodegrid Bold SR. Sporting a number of high-density interfaces and powerful ethernet ports, the Bold SR offers versatility anywhere you deploy. From delivering failover & out-of-band to your NOC, to handling every function at your faraway network edge, Bold is your compact solution for all-in-one networking. Virtualize your stack with your choice of SD-WAN, firewall, IoT, and other applications.

Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router. By default, the PCIe interface will show up as four virtual Ethernet interfaces. Two interfaces in passthrough mode to the 25G SFP28 cages. Remaining two virtual Ethernet-PCIe interfaces are bridged with the Gigabit Ethernet port for management access. The user can configure all interfaces and settings freely since we are running fully functional RouterOS here. To get this CCR device to work as an NIC, a new Passthrough mode was implemented. Basically, a FastForward FastPath mode that can also pass hardware link statuses. This NIC can reach wire-speed (100Gbps) with Jumbo frames. It ensures that in most server setups this CCR network card will not be the bottleneck.

The Cisco Wireless Gateway for LoRaWAN and Cisco Interface Module for LoRaWAN, available with Cisco Catalyst 1100 Rugged Series Routers, enable IoT implementations mandating low data rates and battery-powered end devices over long-distance connectivity. The products use long-range (LoRa) technology and comply with long-range wide-area network (LoRaWAN) specifications, defined by the LoRa Alliance. The gateway embeds digital signal processor (DSP) capabilities and high-accuracy GPS specifically designed for geolocation. Optional integrated cellular backhaul is available through connectivity to a Cisco Catalyst IR1100 Rugged Series Router. Improve spectrum utilization with up to 16 uplink channels with the gateway or up to 8 channels with the module.

The Cisco® ASR 920 Series Aggregation Services Router (ASR) is a full-featured converged access platform designed for the cost-effective delivery of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in a compact package. It also enables service providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from within the access layer. The Cisco ASR 920 Series offers key Carrier Ethernet features that simplify network operation; you can use them for premium services with enhanced service-level agreements (SLAs). An optional "pay-as-you-grow" feature and service activation model makes the Cisco ASR 920 Series flexible and cost-effective.

A robust portfolio of software-defined networking (SDN)-enabled routing platforms, the MX Series provides industry-leading system capacity, density, security, and performance with unparalleled longevity. MX Series routers are the key to digital transformation for service providers, cloud operators, and enterprises in the cloud era. The MX304 Universal Routing Platform delivers massive scale and efficiency for space- and power-constrained environments. It is a carrier-grade, multiservice platform with extensive automation capabilities enabling operators to meet constantly expanding bandwidth, subscriber, and service demands. The MX304 Universal Routing Platform delivers 4.8 Tbps of system capacity in a 2 RU unit and supports 96 x 10 or 25 GbE, 48 x 40, 50, or 100 GbE, or 12 x 400 GbE interfaces in a single chassis. The MX10004, MX10008, and MX10016 Universal Routing Platforms deliver unprecedented scale for service provider and cloud operators.

5x Gigabit Ethernet, Dual Core 880MHz CPU, 256MB RAM, USB, microSD, RouterOS L4. hEX is a five-port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full-size USB port. This new updated revision of the hEX brings several performance improvements. It is affordable, small and easy to use, but at the same time comes with a very powerful dual-core 880MHz CPU and 256MB RAM, capable of all the advanced configurations that RouterOS supports. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, the microSD slot on it provides improved r/w speed for file storage and Dude. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

RUGGEDCOM’s family of industrial Edge routers include the RUGGEDCOM RX1400 and the RUGGEDCOM RM1224, space-saving, small form-factor rugged devices that offer reliable, high-bandwidth WLAN or 4G LTE connectivity over short and long distances for remote networks in harsh environments. Designed for and put to the test under the harshest environments, RUGGEDCOM products meet and exceed recognized industry standards for performance in mission-critical applications. When it comes to RUGGEDCOM products, Siemens conducts Highly Accelerated Life Testing (HALT) in the early stages of product development to detect any design or performance issues as well as Highly Accelerated Stress Screening (HASS) later to ensure that customers get orders free of manufacturing errors and random defects. RUGGEDCOM products are thus able to provide reliable and error-free operation in harsh industrial environments.

The Nokia 7950 Extensible Routing System (XRS) is a next-generation routing platform that can help you sustain profitable growth in a highly competitive and constantly changing market. It delivers the scale, efficiency, and versatility you need to address evolving service demands driven by the cloud, 5G, and the Internet of Things. Drawing on our proven silicon, software, and systems integration innovations, the 7950 XRS lets you build a core network with enough headroom to meet capacity demands well into the next decade. On one common platform, you can cost-effectively address your IP routing, internet peering, Multiprotocol Label Switching (MPLS), and infrastructure service requirements. The 7950 XRS has been deployed by telecom, cable, mobile, utility, and private network operators of all sizes. It is also the trusted routing platform of major Web-scale operators and internet exchange providers around the world.