Cisco Nexus 7000 Series Switches Alternatives

The HPE MSR4000 Router Series deliver high-performance large branch routing with up to 36 Mpps in a cost-optimized form factor. Featuring integrated routing, switching, security, VPN, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With the Open Application Platform module, the MSR4000 Router Series offers a wide range of virtualized applications. Its distributed, modular architecture and high reliability also strengthen the resiliency of large branches. Enhances security with built-in IPS and optional HPE IPS filter subscription, as well as a zone-based and stateful firewall. OpenFlow facilitates Software-defined Networking (SDN). WAN optimization and Intelligent Resilient Fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN, and VPLS. Fiber LAN switching and high-density E1/T1 modules. The HPE MSR4000 Router Series simplifies your network through integrated routing, switching, security, voice, etc.

Get increased mobility and next-generation WAN and LAN options. Access Ethernet, DSL, 5G, and 802.11ax Wi-Fi. The 1000 Series is ideal for use as customer premises equipment (CPE). Automate deployment, configuration, and management of the 1000 Series with Cisco vManage. A centralized, highly visual dashboard simplifies and extends controls across the SD-WAN fabric and to the cloud edge. Gain enterprise-class security. Cisco Umbrella, Encrypted Traffic Analytics, and advanced threat defense provide high-performance encryption, VPN, firewall, and URL filtering. Cisco Trust Anchor technology protects your network firmware from threats. The 1000 Series are the first fixed-configuration routers with the trusted Cisco IOS XE Software. Cisco IOS XE Software is optimized for cloud connectivity, enhanced visibility, and full-stack security, with robust multicloud capabilities.

Cisco® 8000 Series routers complete this journey. They deliver provider-class routing functionality at unmatched density, performance, and power. This enables Cisco 8000 Series to be deployed into an unprecedented range of routing roles – all supported with a single ASIC architecture and operating system – thus streamlining qualification, deployment, and operations. The Cisco 8000 Series combines the revolutionary Cisco Silicon One™, IOS XR® software, and a set of clean sheet chassis to deliver a breakthrough in high-performance routers. The 8000 Series comprises a full range of feature-rich, highly scalable, deep-buffered, on-chip High Bandwidth Memory (HBM) and 400 Gigabit Ethernet (GbE)-optimized routers ranging from 10.8 to 25.6 Tbps in a 1 RU footprint. It is also available in an industry leading, rack-mountable modular system capable of 518.4 Tbps of full-duplex, line rate forwarding.

The Cisco® NCS 560 Series Router delivers a cost-effective, modular solution based on a protocol-independent fabric architecture. The Cisco NCS 560 Series Router, as part of the Cisco Evolved Programmable Network (EPN) architecture, is capable of delivering unbounded scale and unmatched capabilities for Carrier Ethernet business services, over redundant and protected packet-based network technologies (IP/MPLS, MPLS-TE, SR, SR-TE, TI-LFA). The Cisco NCS 560 Series Router Ethernet interface modules are designed to give customers a high degree of flexibility and value. All Ethernet interface modules share a common core that supports time stamping on the module for Y.1731 Operations, Administration, and Maintenance (OAM) delay measurement functions to achieve precise results for one-way and two-way delay measurement. The modules also provide time-stamping functions for the IEEE 1588-2008 protocol.

Cisco ASR 1000 Series Aggregation Services Routers provide a Software Defined WAN platform that aggregates multiple WAN connections and network services including encryption and traffic management, and forward them across WAN connections at line speeds from 2.5 to 200 Gbps. The routers contain both hardware and software redundancy in an industry-leading high-availability design. The latest additions to the Cisco ASR 1000 Series are the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router. Both new routers support up to 100 Gbps in a 2-Rack-Unit (2RU) and 60 Gbps in a 1-Rack-Unit (1RU) form factor, respectively. The ASR 1002-HX has 8 built-in 10 Gigabit Ethernet (GE) ports and 8 1 GE ports, with the Ethernet Port Adapter (EPA) slot for expansion. The ASR 1001-HX has 4 built-in 10 GE ports, 8 1 GE ports, and 4 configurable 10 GE or 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 is the newest addition to the modular control plane engines in the Cisco ASR 1000 Series.

The HPE HSR6800 Router Series is a family of high-performance, multiservice routers designed for data center interconnection, enterprise WAN core, campus WAN edge, and high-speed WAN aggregation services. It runs the Comware operating system and features an advanced multi-core, distributed service processing hardware architecture that scales up to 420 Mpps forwarding and up to 2 Tbps switching capacity. The router delivers robust routing, multicast, Multiprotocol Label Switching (MPLS), IPv6, security, quality of service, carrier-level high-availability features, and high-density 10GbE and 1GbE interface options. Fully modular Comware v7 network operating system offers improved performance and system availability. Feature enhancements including ADVPN, IRF2, EVI, EAA, and ISSU. FIP-240 doubles FIP-210 forwarding performance, up to 4 HIM/MIM slots. Line cards offer 1GbE combo/10bGE ports, and increased IPsec performance. RT-HIM-2EXP doubles HIM 10GbE port density and supports SFP+.

The NCS 500 Series offers a secure and highly available access-routing platform for service providers. Both fixed and modular form factors support advanced automation and programmability to provide 5G, Remote PHY, Carrier Ethernet, and FTTx. The NCS 540 and NCS 560 are built for 5G with advanced timing, ultra-low latency, and ultra-high capacity. They provide the foundation for pervasive Mobile Broadband (MBB), massive IoT, tactile Internet, smart cities, and AR/VR. Build application-aware networks with segment routing, open and programmable interfaces using NETCONF and YANG data models and APIs, and real-time visibility with streaming telemetry. Intelligently converge network services onto a single platform with the highly scalable and energy efficient NCS 500 Series. Flexibly scale capacity with ports that support 1/10/25/40/100 GbE.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, SFP cage, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and an ideal solution for FTTH (Fiber To The Home) implementations. The RB2011iLS has 11 ports, Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing an affordable wire-speed fiber-to-copper converter, and additional five fast Ethernet ports. The board can be powered by power jack or PoE. Note that SFP transceiver is not included. RB2011iLS supports any 1.25G SFP transceivers that are within the SFF committee specifications for SFP transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network). Tested and recommended to use with MikroTik SFP modules S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.

The 7210 SAS product family provides the deployment flexibility, service richness and reliability you need to extend segment routing, IP/MPLS, and Carrier Ethernet to the access points of your network. With a wide variety of platforms, it is used for business VPN, residential broadband, demarcation, and mobile backhaul, and is also widely used in industry, public sector, and enterprise applications. Ready your network for future growth with high-density GE and 10GE interfaces, 100 GE uplinks, and up to 2 Tb/s throughput. Offer competitive services based on high availability and quality of service. As a member of the industry-leading Nokia Service Router product portfolio, the 7210 SAS runs the Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform (NSP) for high-performance, end-to-end service delivery and management and carrier-SDN integration. 7210 SAS supports differentiated services, including Carrier Ethernet, IP VPN, and enhanced services.

Start your 100 Gigabit journey with our new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072. But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines! There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. And these PSUs might look familiar if you have used our CCR1072 before: you can keep using your previous hot-swap power supplies and SFP modules.

Internal and expansion modules give you the flexibility to add or upgrade WAN and storage components as technologies and needs evolve. Cisco SD-WAN architecture delivers scale, simplicity, and unified management for extending enterprise networks to a distributed IoT deployment. With its small form-factor (less than 2RU) and low typical power consumption of 10 W, it is easy to install and integrate into space- and power-constrained cabinets. Cisco IOS XE is highly programmable with multilayer security built in. This unified software stack is ideal for process and workflow automation, enabling you to qualify and deploy new services more quickly. The two cellular modules enable concurrent connectivity to two cellular networks for WAN redundancy, enhanced data throughputs, load balancing, and differentiated services. The hardware is future-proofed for 5G.

Transform your network and scale beyond the physical infrastructure by virtualizing your CCAP with the Cisco Cloud Native Broadband Router. Built from the ground as a cloud native application composed of containerized microservices using open-source tools, the Cisco Cloud Native Broadband Router delivers nonpareil scalability, elasticity, and resilience. Designed and coded from the ground up as a composition of multiple services for elasticity, resiliency, and composability. Based on open, modular, standards-based software, including Kurbernetes and Docker, for rapid and agile development and deployment. Change the way you operate your network with real time monitoring, analysis, and remediation. Take advantage of web-scale operations with auto-provisioning, auto-scaling, and auto-redundancy. Written for the cloud as software independent of hardware. Compatible with bare metal and designed to be portable across multi-cloud environments.

The Session Smart™ Router powers Juniper’s SD-WAN solution that’s designed to connect users with exceptional experiences. Built on an application-aware and zero-trust secure network fabric, it meets the most stringent enterprise performance, security, and availability requirements. The router overcomes inherent inefficiencies of conventional solutions with a tunnel-free architecture that enables improved performance, fast deployments, and cost savings. The software solution can run on customer premises equipment (CPE), on data center network servers, and in the cloud for flexible deployments. It is centrally manageable using the AI-driven Juniper Mist™ cloud or the Juniper Session Smart Conductor platform. Application-aware routing, fail-safe service delivery, orchestration and automation, zero trust security, and centralized management using the Juniper Mist Cloud or Session Smart Conductor.

PTX Series Routers form the foundation of the world’s largest core and peering architectures. Powered by the latest generation of Juniper’s custom Express family ASICs, they’re cloud-optimized to enable smooth 400G migrations. They simultaneously deliver the scale, flexibility, and investment protection needed to meet today’s market needs. The routers offer native 400G inline MACsec, flexible filtering, and a reliable network operating system that has been powering generations of high-performance solutions. Discover what 100G and 400G mass scale in the cloud can offer with PTX routing. The modular PTX10004, PTX10008, and PTX10016 Packet Transport Routers directly address the massive bandwidth demands being placed on networks. They bring ultra-high port density, native 400GbE in-line MACsec, and latest-generation ASIC investment to the most demanding WAN and data center architectures.

No matter what challenges you’re facing at your data center and branch locations, the Nodegrid Net Services Router (NSR) gives you complete control of your network. It’s the only modular solution that adjusts to your business needs, so your network can become a powerful value creator. Free your resources with the industry’s most in-depth out-of-band management. Provide secure & flexible network access via Secure Access Service Edge (SASE). Get uncompromising control on a granular scale with SD-Branch capabilities. The Nodegrid Net Services Router makes it easy to optimize your stack. Using virtualized network functions (VNFs), the NSR goes beyond the network switch to bring you a virtual environment that scales to your needs. Use VNFs alongside the NSR’s modular expansion cards for faster deployments, hardened security, & added savings. Replace up to six devices with a single NSR. Virtualize more systems to drastically downsize your stack.

Flexibly connect to the SD-WAN fabric, allowing for simple, plug-and-play deployments. Transform your lean branch with the power of customized, hardware-enabled services. Centrally manage your environment with Cisco vManage. Get actionable insights across the internet, cloud, and applications with built-in Cisco vAnalytics and Cisco ThousandEyes solutions. Cisco SD-WAN modular router for small and midsize branches that need higher throughput. Cisco SD-WAN modular router for small branches with SASE-compliant, cloud-based security requirements.

Get safe and flexible SD-Branch virtualization with the Cisco hypervisor network function virtualization (NFVIS) and routing virtual network functions (VNFs). Centrally manage your environment with Cisco vManage. Get actionable insights across the internet, cloud, and applications with built-in Cisco vAnalytics and Cisco ThousandEyes solutions. Reach new levels of automation and transformation with support for the latest digital services and chaining. Build a faster, more reliable network fabric with support for the latest link types. Cisco SD-WAN modular router for the small and lean virtualized branch.

The Cisco® 900 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as Customer Premises Equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. The Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro Ethernet and wireless LTE WAN connectivity. Service providers offering both managed Ethernet and wireless LTE WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.

The Cisco ENCS is a hybrid platform that combines the functionality of a traditional router and a traditional server with a smaller infrastructure footprint. Deploy network services in minutes. With the Cisco Enterprise Network Compute System, you can virtualize all your services in the branch, including routers. The ENCS 5000 provides service agility and density needed for the branch that has limited IT resources. The 5000 Series is a purpose-built compute platform optimized to run VNFs. Using VNFs saves time and simplifies operations. Zero-touch automation enables fast and flawless branch deployments and management. Cisco's open-ecosystem approach to Network Functions Virtualization (NFV) in the 5000 Series enables other vendors to have their VNFs certified to help ensure compatibility and interoperability.

It supports robust cybersecurity, Cisco Edge Intelligence, 5G, SD-WAN, and more. Speed and scale are pillars of the IR8300 - it's the first Catalyst to integrate Cisco QuantumFlow and Unified Access Data Plane Technologies. The IR8300 is an integrated routing and switching platform. It's easily upgradeable with modules for public and private 4G LTE, 5G, and more. Get enterprise-grade security and network policies to connect reliably and securely, using Cisco vManage for SD-WAN. Use the platform’s built-in Cisco IOx edge compute to build and run your own applications at the edge. Synchronize network resources that host highly time-sensitive applications. The IR8300 meets substation compliance standards, including IEEE 1613 and IEC 61850-3.

The Cisco® ASR 920 Series Aggregation Services Router (ASR) is a full-featured converged access platform designed for the cost-effective delivery of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in a compact package. It also enables service providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from within the access layer. The Cisco ASR 920 Series offers key Carrier Ethernet features that simplify network operation; you can use them for premium services with enhanced service-level agreements (SLAs). An optional "pay-as-you-grow" feature and service activation model makes the Cisco ASR 920 Series flexible and cost-effective.

The Network Convergence System 5000 Series is designed to economically scale large enterprise, over-the-top (OTT), and service provider data center networking architectures. The 5000 Series routers offers 960-Gbps throughput with 1.4 Bpps. They also have a small footprint, and consume less power. Get a dense, programmable solution that supports application hosting, machine-to-machine (M2M) interfacing, telemetry, and flexible package delivery for software feature enhancements. Cisco nV technology dramatically reduces operational costs and simplifies the network through the use of the Cisco ASR 9000 Series distributed control plane.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011iL-IN is the most basic model, with five Gigabit Ethernet ports, five Fast Ethernet ports, a power jack, and PoE support. It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. There is a PoE output function for port #10, it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA. RouterBOARD 2011iL-IN comes with a desktop enclosure and power supply. The wall mount kit for the network closet is available for purchase as an optional accessory. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use.

For industrial settings where reliability, flexibility and secure systems are critical, Belden’s routers deliver a simplified solution with performance and security in one product. Compliant with IEC 61850, the routers are ideal for large substation installations or similar applications where hardness, performance, security, quality of service and diverse protocols are required. Advanced routing & security, combined capabilities of L3 switching and WAN routing. Expandable & Modular: All gigabit ports with 4-port up to 10-port GbE LAN options in configurable slots. Legacy infrastructure interfacing, support for legacy T1E1 and DDS interfaces, and non-Ethernet communication.

Whether you’re in telecom, retail, or oil & gas, deploy the Bold SR for the functionality & control you need. This lightweight box allows you to connect more than a dozen devices & add-ons, so you can deliver robust capabilities throughout your enterprise. The Bold SR puts you in charge with remote out-of-band management, Secure Access Service Edge, and SD-Branch capabilities. Reduce CAPEX & virtualize your stack. Cut support costs & response times with remote out-of-band. Set up autonomous networking to prevent downtime. Secure your branch networks and more using the Nodegrid Bold SR. Sporting a number of high-density interfaces and powerful ethernet ports, the Bold SR offers versatility anywhere you deploy. From delivering failover & out-of-band to your NOC, to handling every function at your faraway network edge, Bold is your compact solution for all-in-one networking. Virtualize your stack with your choice of SD-WAN, firewall, IoT, and other applications.

These routers have a rugged industrial hardware design and a highly resilient architecture. They increase the uptime of communications networks and grid availability to help ensure message delivery. Choose from multiple platforms. Built to withstand harsh environments, the IR510 model provides enterprise-class RF mesh connectivity to Ethernet- and serial-enabled IoT devices like recloser controls, cap bank controls, and voltage regulator controls. The ruggedized IR529 model platforms provide range extension functionality to enhance the RF mesh reliability by adding paths and nodes. They also enable connectivity in low-end point density deployments.

HUAWEI WiFi AX2 comes equipped with 5 GHz and 2.4 GHz bands that operate simultaneously and automatically switch devices between 5 GHz and 2.4 GHz bands to ensure that they enjoy an optimal connection at all times. 5 GHz is ideal for high-speed gaming and streaming, whereas 2.4 GHz provides for broader coverage. Multiple routers placed can be grouped under a single Wi-Fi name, when you link your HUAWEI WiFi AX2 with the other HUAWEI routers throughout your home, with automatic switching as you move around. HUAWEI WiFi AX2 comes with three Gigabit Ethernet ports, each of which supports WAN/LAN auto-adaptation4, sparing you from having to distinguish between them and making broadband installation a sheer breeze. With AX2, you can check the Wi-Fi coverage map for your home, view the network status at a glance, and easily solve network issues by following the suggested tips. Manage your router with a few taps of your phone to connect devices, and manage your online activities.

HUAWEI WiFi WS5200 lets you enjoy blazing dual-band 1300Mbps Wi-Fi speeds (max 400 Mbps at 2.4 GHz + max 867 Mbps at 5 GHz). It also offers Gigabit Ethernet connection for speeds as fast and consistent as possible. Play online games with imperceptible lag, stream high-definition movies with no buffering, and download large files almost instantaneously. Capable of connecting up to 64 devices, HUAWEI WiFi WS5200 brings high-speed internet to your phone, tablet or laptop. Let your whole family choose what they want to do online, from online learning to gaming and video streaming. HUAWEI WiFi WS5200 comes with 5 GHz and 2.4 GHz bands that operate simultaneously. Your devices will automatically switch between the 5 GHz and 2.4 GHz bands for optimal use. 5 GHz is for fast-speed gaming and streaming, while 2.4 GHz provides wider coverage. Manage your whole-home Wi-Fi, and detect and solve network issues.

We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU. But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading! Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip.

The HPE MSR3000 Router Series feature a modular design that delivers unmatched application services for medium to large branch offices. These routers offer Gigabit switching, provide an enhanced PCI bus, ship with the Comware v7 OS, provide a full-featured resilient routing platform including IPv6 and MPLS, offer up to 13 Mpps forwarding capacity and 14.3 Gb/s of IPSec VPN encrypted throughput to ensure high performance with concurrent services. With the Open Application Platform module, the MSR3000 Router Series offers a wide range of virtualized applications. Its distributed architecture and high reliability also strengthen the resiliency of medium to large branches. The MSR3000 series provides an agile, flexible network infrastructure that enables you to quickly adapt to changing business requirements while delivering integrated concurrent services on a single, easy-to-manage platform.

A robust portfolio of software-defined networking (SDN)-enabled routing platforms, the MX Series provides industry-leading system capacity, density, security, and performance with unparalleled longevity. MX Series routers are the key to digital transformation for service providers, cloud operators, and enterprises in the cloud era. The MX304 Universal Routing Platform delivers massive scale and efficiency for space- and power-constrained environments. It is a carrier-grade, multiservice platform with extensive automation capabilities enabling operators to meet constantly expanding bandwidth, subscriber, and service demands. The MX304 Universal Routing Platform delivers 4.8 Tbps of system capacity in a 2 RU unit and supports 96 x 10 or 25 GbE, 48 x 40, 50, or 100 GbE, or 12 x 400 GbE interfaces in a single chassis. The MX10004, MX10008, and MX10016 Universal Routing Platforms deliver unprecedented scale for service provider and cloud operators.

These platforms (designed for USA and Australian markets) give time-division multiplexing (TDM) and serial and analog circuit-based applications reliable and efficient access to next-generation IP networks with cost, redundancy, and efficiency advantages. The CTP2056 Circuit to Packet Platform bridges legacy and IP worlds for circuit-switched applications. Designed for U.S. and Australian markets, this 4 U rack-mountable chassis offers maximum flexibility with up to 56 circuit emulation interfaces. The CTP2024 Circuit to Packet Platform bridges legacy and IP worlds for circuit-switched applications. Designed for the U.S. and Australian markets, this 2 U rack-mountable chassis supports up to 24 circuit emulation interfaces and optional redundant power. The CTP2008 Circuit to Packet Platform bridges legacy and IP worlds for circuit-switched applications. This 1 U rack-mountable chassis supports up to eight software-configurable circuit emulation interfaces.

The Nokia 7950 Extensible Routing System (XRS) is a next-generation routing platform that can help you sustain profitable growth in a highly competitive and constantly changing market. It delivers the scale, efficiency, and versatility you need to address evolving service demands driven by the cloud, 5G, and the Internet of Things. Drawing on our proven silicon, software, and systems integration innovations, the 7950 XRS lets you build a core network with enough headroom to meet capacity demands well into the next decade. On one common platform, you can cost-effectively address your IP routing, internet peering, Multiprotocol Label Switching (MPLS), and infrastructure service requirements. The 7950 XRS has been deployed by telecom, cable, mobile, utility, and private network operators of all sizes. It is also the trusted routing platform of major Web-scale operators and internet exchange providers around the world.

Huawei NetEngine 8000 series routers provide an all-service, intelligent router platform designed for the cloud era. Using ultra-broadband pipes to construct simplified networks, and Segment Routing (SR) and Segment Routing over IPv6 (SRv6) protocols to establish intelligent connections, NetEngine 8000 combines with Huawei's next-generation Network Cloud Engine (NCE) to implement full-lifecycle automation and proactive Operations and Maintenance (O&M). An intent-driven approach frees customers from unnecessary constraints, unleashing network potential. Available in a range of form factors and applicable to core, aggregation, and access networks, the award-winning NetEngine 8000 offers high performance and reliability, with low power consumption and full evolution capabilities. Applications include functioning as a core node for an enterprise Wide Area Network (WAN), as an access node on a large enterprise network, as a Data Center Interconnect (DCI) node.

Traditional branch gateways leave you cobbling together many solutions. But the Nodegrid Hive SR is your 5-in-1 branch gateway that makes edge networking simple and flexible. Gain turnkey convenience on first boot, with open architecture and next-gen out-of-band that let you fully customize and control everything at the edge. Get a low-cost solution that offers speed & power out of the box. Gain 5-in-1 capabilities to reduce CAPEX & OPEX. Control everything with ZPE’s signature next-gen out-of-band. Nodegrid Hive SR’s built-in gateway profile means you don’t have to manually deploy separate boxes. Just boot up, and the HSR automatically configures routing, switching, and firewall. No more long deployments or juggling hardware stacks. The Hive SR is the first 5-in-1 gateway with open architecture, so you can consolidate and fully customize your environments. Get SD-WAN, security, compute, NetDevOps, and out-of-band in one box, and deploy virtualized solutions of your choice.

This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.

Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router. By default, the PCIe interface will show up as four virtual Ethernet interfaces. Two interfaces in passthrough mode to the 25G SFP28 cages. Remaining two virtual Ethernet-PCIe interfaces are bridged with the Gigabit Ethernet port for management access. The user can configure all interfaces and settings freely since we are running fully functional RouterOS here. To get this CCR device to work as an NIC, a new Passthrough mode was implemented. Basically, a FastForward FastPath mode that can also pass hardware link statuses. This NIC can reach wire-speed (100Gbps) with Jumbo frames. It ensures that in most server setups this CCR network card will not be the bottleneck.

Our Total Access 900 Series is designed for Ethernet or multi-T1 applications. It includes four T1 interfaces, one Gigabit, two Fast Ethernet interfaces for LAN or WAN facing, and several platforms of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices also offer the ability to add SBC functionality for up to 100 simultaneous calls. Our Total Access 908 offers a single T1 network interface and 8 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213908F1. Our Total Access 916 offers a single T1 network interface and 16 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213916F1. Our Total Access 908 offers a single T1 network interface and 24 FXS user interfaces for analog voice delivery.

Our NetVanta 4000 Series is ideal for carrier bundled service offerings up to 1Gbit/s, and enterprise-class internet access for secure, high-speed corporate connectivity. Several variations add power over Ethernet (PoE) to the built-in switch, VPN and/or special voice monitoring services. All our NetVanta 4000s can also provide eSBC functionality, delivering a truly converged application platform at the customer premises. What’s more, they can grow via software as your VoIP services expand, supporting up to 1000 calls. Our NetVanta 4148 provides four routed, autosensing Gigabit interfaces, two of which can be fiber-fed, and an 8-port Gigabit Ethernet switch. The Gigabit interfaces can be LAN or WAN-facing and are ideal for Ethernet redundancy with immediate failover if one of the links goes down. Part number 17004148F1. Our NetVanta 4148 with enhanced feature pack upgrade adds the ability to support 500 VPN tunnels.

Mobile internet has never been faster. Generation 6 version of Chateau 5G. Much faster wireless, improved CPU, and now, with 2.5 Gigabit Ethernet! On the surface, the new Chateau is very similair to the previous models. With the Generation6 802.11ax wireless standard and Wave 2 support, Chateau 5G ax can deliver unprecedented speed. If we compare it to the previous generation, we’re looking at up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum! We’ve made massive improvements to the wireless radio and antennas. Chateau 5G ax supports MIMO 4x4 on 5G and LTE. There are 6 built-in LTE/5G antennas. One pair of external antennas provides even better wireless network coverage in the largest homes, and the other, improved LTE/5G connectivity. With speeds like that, the ports also had to rise to the occasion. We kept four Gigabit Ethernet ports and added a 2.5 Gigabit Ethernet port on top. And let’s not forget the USB which can be handy for storage purposes.

The best home AP just got even better. Generation 6 version of the Chateau LTE18. Much faster wireless, improved CPU, and now, with 2.5 Gigabit Ethernet! With the Generation6 802.11ax wireless standard and Wave 2 support, Chateau LTE18 ax can deliver unprecedented speed. If we compare it to the previous generation, we’re looking at up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum! We’ve made massive improvements to the wireless radio and antennas. Chateau LTE18 ax supports MIMO 4x4 on LTE. There are 4 built-in LTE antennas and 2 optional external network antennas for exceptional coverage in your whole home! With speeds like that, the ports also had to rise to the occasion. We kept four Gigabit Ethernet ports and added a 2.5 Gigabit Ethernet port on top. And let’s not forget the USB which can be handy for storage purposes. The modern quad-core CPU running at 1.8 GHz combined with a solid GB of RAM packs a punch when it comes to heavy operations.

The Cisco Wireless Gateway for LoRaWAN and Cisco Interface Module for LoRaWAN, available with Cisco Catalyst 1100 Rugged Series Routers, enable IoT implementations mandating low data rates and battery-powered end devices over long-distance connectivity. The products use long-range (LoRa) technology and comply with long-range wide-area network (LoRaWAN) specifications, defined by the LoRa Alliance. The gateway embeds digital signal processor (DSP) capabilities and high-accuracy GPS specifically designed for geolocation. Optional integrated cellular backhaul is available through connectivity to a Cisco Catalyst IR1100 Rugged Series Router. Improve spectrum utilization with up to 16 uplink channels with the gateway or up to 8 channels with the module.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature, a power injector on Ethernet port 10, it can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! The maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports.

There are two ways to look at the brand new Fiber Box Plus. On the one hand, it’s a massive upgrade of our previous FiberBox devices. This version features a modern ARM CPU, more RAM, and four 10-Gigabit SFP+ ports. Fast and reliable connectivity on a budget. Without the distance limitations of Ethernet. There’s also a Gigabit Ethernet port for management purposes or PoE-in powering. We’ve also included a 2-pin terminal and a standard DC jack, so you have 3 different power options to choose from. FiberBox Plus supports a wide input voltage range of 24-57V. And it is remarkably efficient: maximum power consumption (without attachments) is only 7W. Another way to look at the new FiberBox Plus – it’s a budget version of the amazing netFiber 9. You can save a lot of money if you don’t need the extra Gigabit SFP ports. It even features the same impressive Marvell 98DX226S switch-chip, so the performance is definitely there!

Edge networks serve billions of devices with low-latency services. You need feature rich routers that economically scale with bandwidth demand. The ASR 9000 series is your edge routing device capable of supporting the application performance required to power 5G service needs. Enhanced security including Secure Boot, Cisco Trust Anchor, and anti-counterfeit measures. With a Secure Development Lifecycle to ensure manufactured integrity. Investment protection for ASR 9000 with continued software and hardware innovations. Custom ASIC optimized to balance performance with a 100x capacity increase and a 96% power reduction per Gbps. With real-time telemetry, segment routing, and Ethernet Virtual Private Networks (EVPNs).

The Network Convergence System (NCS) 6000 helps enable superior network agility, packet optical convergence, and petabits-per-second system scale. It facilitates the Cisco Evolved Programmable Network to support virtualization and programmability at low total cost of ownership and delivers high-bandwidth mobile, video, and cloud services to end users. Innovations include Cisco nPower X1 NPUs, hardware-enabled true zero-packet, zero-topology loss ISSU, capability to scale beyond 1 petabit in a multi-chassis configuration, enhanced operations support, and packet-optical integration. Use an adaptable power consumption model for both the ASIC and CMOS photonics technology for the lowest carbon footprint in service provider routing today. Easily adapt each line card's power consumption to the number of ports used.

Extend your network visibility, rapidly pinpoint issues, get faster resolution, and actively manage the performance of what matters. Extend your visibility across the internet, the cloud, and SaaS. You can pinpoint application issues and gain actionable insights with Cisco ThousandEyes integration on selected ISR 4000 Series models. Configure and monitor your network and enforce business policies through Cisco DNA Center and Cisco SD-WAN. Simplify network automation and turn hours of work into minutes. Protect your branch site across the LAN and WAN and in the cloud with security integrated into the router. You no longer need a separate security appliance. Deploy key integrated network services for your branch in minutes, virtually or on-premises, without sacrificing performance.

Double the usual performance: we took your feedback from the MikroTik User Meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.RB5009 has it all, and even more! The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink! Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads.

Like the other models in CCR2004 series, this CCR also features the Amazon Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores. While this CPU is running at 1.2 GHz, the router can be 3x as fast than the previous generation CCR’s. This is the silent powerhouse. Enjoy all the power of a real CCR in peace and quiet. Get rid of all the hum and buzz in your office, studio, server room or homelab without sacrificing the performance! The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a RJ-45 console port on the front panel. Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.

1U rackmount, 10xGigabit Ethernet, SFP, USB 3.0, LCD, PoE out on port 10, 2x1.4GHz CPU, 1GB RAM, RouterOS L5. The RB3011 is a new multi-port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full-size USB 3.0 port, for adding storage or an external 3G/4G modem. RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.