Cisco Network Convergence 560 Alternatives

Cisco® 8000 Series routers complete this journey. They deliver provider-class routing functionality at unmatched density, performance, and power. This enables Cisco 8000 Series to be deployed into an unprecedented range of routing roles – all supported with a single ASIC architecture and operating system – thus streamlining qualification, deployment, and operations. The Cisco 8000 Series combines the revolutionary Cisco Silicon One™, IOS XR® software, and a set of clean sheet chassis to deliver a breakthrough in high-performance routers. The 8000 Series comprises a full range of feature-rich, highly scalable, deep-buffered, on-chip High Bandwidth Memory (HBM) and 400 Gigabit Ethernet (GbE)-optimized routers ranging from 10.8 to 25.6 Tbps in a 1 RU footprint. It is also available in an industry leading, rack-mountable modular system capable of 518.4 Tbps of full-duplex, line rate forwarding.

Get increased mobility and next-generation WAN and LAN options. Access Ethernet, DSL, 5G, and 802.11ax Wi-Fi. The 1000 Series is ideal for use as customer premises equipment (CPE). Automate deployment, configuration, and management of the 1000 Series with Cisco vManage. A centralized, highly visual dashboard simplifies and extends controls across the SD-WAN fabric and to the cloud edge. Gain enterprise-class security. Cisco Umbrella, Encrypted Traffic Analytics, and advanced threat defense provide high-performance encryption, VPN, firewall, and URL filtering. Cisco Trust Anchor technology protects your network firmware from threats. The 1000 Series are the first fixed-configuration routers with the trusted Cisco IOS XE Software. Cisco IOS XE Software is optimized for cloud connectivity, enhanced visibility, and full-stack security, with robust multicloud capabilities.

The Cisco Wireless Gateway for LoRaWAN and Cisco Interface Module for LoRaWAN, available with Cisco Catalyst 1100 Rugged Series Routers, enable IoT implementations mandating low data rates and battery-powered end devices over long-distance connectivity. The products use long-range (LoRa) technology and comply with long-range wide-area network (LoRaWAN) specifications, defined by the LoRa Alliance. The gateway embeds digital signal processor (DSP) capabilities and high-accuracy GPS specifically designed for geolocation. Optional integrated cellular backhaul is available through connectivity to a Cisco Catalyst IR1100 Rugged Series Router. Improve spectrum utilization with up to 16 uplink channels with the gateway or up to 8 channels with the module.

Edge networks serve billions of devices with low-latency services. You need feature rich routers that economically scale with bandwidth demand. The ASR 9000 series is your edge routing device capable of supporting the application performance required to power 5G service needs. Enhanced security including Secure Boot, Cisco Trust Anchor, and anti-counterfeit measures. With a Secure Development Lifecycle to ensure manufactured integrity. Investment protection for ASR 9000 with continued software and hardware innovations. Custom ASIC optimized to balance performance with a 100x capacity increase and a 96% power reduction per Gbps. With real-time telemetry, segment routing, and Ethernet Virtual Private Networks (EVPNs).

The HPE MSR4000 Router Series deliver high-performance large branch routing with up to 36 Mpps in a cost-optimized form factor. Featuring integrated routing, switching, security, VPN, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With the Open Application Platform module, the MSR4000 Router Series offers a wide range of virtualized applications. Its distributed, modular architecture and high reliability also strengthen the resiliency of large branches. Enhances security with built-in IPS and optional HPE IPS filter subscription, as well as a zone-based and stateful firewall. OpenFlow facilitates Software-defined Networking (SDN). WAN optimization and Intelligent Resilient Fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN, and VPLS. Fiber LAN switching and high-density E1/T1 modules. The HPE MSR4000 Router Series simplifies your network through integrated routing, switching, security, voice, etc.

The Cisco® 900 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as Customer Premises Equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. The Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro Ethernet and wireless LTE WAN connectivity. Service providers offering both managed Ethernet and wireless LTE WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.

The Cisco 2010 Connected Grid Router, the first in the Cisco 2000 Series, is an ideal platform to support the communications requirements of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This product has been extensively tested and is KEMA-certified to meet challenging substation compliance standards, including IEEE 1613 and IEC 61850-3. Cisco IOS Software delivers the benefits of integrated security for NERC/CIP compliance, quality of service, and network management to help ensure integrity and priority of operational data communications. Rugged industrial design and substation compliance with IEC-61850-3 and IEEE 1613 for utility substation environments. Support for a series of WAN connectivity options using Grid Router WAN Interface Cards (GRWICs).

The Network Convergence System 5000 Series is designed to economically scale large enterprise, over-the-top (OTT), and service provider data center networking architectures. The 5000 Series routers offers 960-Gbps throughput with 1.4 Bpps. They also have a small footprint, and consume less power. Get a dense, programmable solution that supports application hosting, machine-to-machine (M2M) interfacing, telemetry, and flexible package delivery for software feature enhancements. Cisco nV technology dramatically reduces operational costs and simplifies the network through the use of the Cisco ASR 9000 Series distributed control plane.

Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router. By default, the PCIe interface will show up as four virtual Ethernet interfaces. Two interfaces in passthrough mode to the 25G SFP28 cages. Remaining two virtual Ethernet-PCIe interfaces are bridged with the Gigabit Ethernet port for management access. The user can configure all interfaces and settings freely since we are running fully functional RouterOS here. To get this CCR device to work as an NIC, a new Passthrough mode was implemented. Basically, a FastForward FastPath mode that can also pass hardware link statuses. This NIC can reach wire-speed (100Gbps) with Jumbo frames. It ensures that in most server setups this CCR network card will not be the bottleneck.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011iL-IN is the most basic model, with five Gigabit Ethernet ports, five Fast Ethernet ports, a power jack, and PoE support. It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. There is a PoE output function for port #10, it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA. RouterBOARD 2011iL-IN comes with a desktop enclosure and power supply. The wall mount kit for the network closet is available for purchase as an optional accessory. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use.

Cisco ASR 1000 Series Aggregation Services Routers provide a Software Defined WAN platform that aggregates multiple WAN connections and network services including encryption and traffic management, and forward them across WAN connections at line speeds from 2.5 to 200 Gbps. The routers contain both hardware and software redundancy in an industry-leading high-availability design. The latest additions to the Cisco ASR 1000 Series are the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router. Both new routers support up to 100 Gbps in a 2-Rack-Unit (2RU) and 60 Gbps in a 1-Rack-Unit (1RU) form factor, respectively. The ASR 1002-HX has 8 built-in 10 Gigabit Ethernet (GE) ports and 8 1 GE ports, with the Ethernet Port Adapter (EPA) slot for expansion. The ASR 1001-HX has 4 built-in 10 GE ports, 8 1 GE ports, and 4 configurable 10 GE or 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 is the newest addition to the modular control plane engines in the Cisco ASR 1000 Series.

The Cisco® ASR 920 Series Aggregation Services Router (ASR) is a full-featured converged access platform designed for the cost-effective delivery of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in a compact package. It also enables service providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from within the access layer. The Cisco ASR 920 Series offers key Carrier Ethernet features that simplify network operation; you can use them for premium services with enhanced service-level agreements (SLAs). An optional "pay-as-you-grow" feature and service activation model makes the Cisco ASR 920 Series flexible and cost-effective.

Huawei NetEngine 8000 series routers provide an all-service, intelligent router platform designed for the cloud era. Using ultra-broadband pipes to construct simplified networks, and Segment Routing (SR) and Segment Routing over IPv6 (SRv6) protocols to establish intelligent connections, NetEngine 8000 combines with Huawei's next-generation Network Cloud Engine (NCE) to implement full-lifecycle automation and proactive Operations and Maintenance (O&M). An intent-driven approach frees customers from unnecessary constraints, unleashing network potential. Available in a range of form factors and applicable to core, aggregation, and access networks, the award-winning NetEngine 8000 offers high performance and reliability, with low power consumption and full evolution capabilities. Applications include functioning as a core node for an enterprise Wide Area Network (WAN), as an access node on a large enterprise network, as a Data Center Interconnect (DCI) node.

Get safe and flexible SD-Branch virtualization with the Cisco hypervisor network function virtualization (NFVIS) and routing virtual network functions (VNFs). Centrally manage your environment with Cisco vManage. Get actionable insights across the internet, cloud, and applications with built-in Cisco vAnalytics and Cisco ThousandEyes solutions. Reach new levels of automation and transformation with support for the latest digital services and chaining. Build a faster, more reliable network fabric with support for the latest link types. Cisco SD-WAN modular router for the small and lean virtualized branch.

The Cisco ENCS is a hybrid platform that combines the functionality of a traditional router and a traditional server with a smaller infrastructure footprint. Deploy network services in minutes. With the Cisco Enterprise Network Compute System, you can virtualize all your services in the branch, including routers. The ENCS 5000 provides service agility and density needed for the branch that has limited IT resources. The 5000 Series is a purpose-built compute platform optimized to run VNFs. Using VNFs saves time and simplifies operations. Zero-touch automation enables fast and flawless branch deployments and management. Cisco's open-ecosystem approach to Network Functions Virtualization (NFV) in the 5000 Series enables other vendors to have their VNFs certified to help ensure compatibility and interoperability.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature, a power injector on Ethernet port 10, it can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! The maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports.

The 7210 SAS product family provides the deployment flexibility, service richness and reliability you need to extend segment routing, IP/MPLS, and Carrier Ethernet to the access points of your network. With a wide variety of platforms, it is used for business VPN, residential broadband, demarcation, and mobile backhaul, and is also widely used in industry, public sector, and enterprise applications. Ready your network for future growth with high-density GE and 10GE interfaces, 100 GE uplinks, and up to 2 Tb/s throughput. Offer competitive services based on high availability and quality of service. As a member of the industry-leading Nokia Service Router product portfolio, the 7210 SAS runs the Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform (NSP) for high-performance, end-to-end service delivery and management and carrier-SDN integration. 7210 SAS supports differentiated services, including Carrier Ethernet, IP VPN, and enhanced services.

The Peplink MAX BR Series is known as the best-kept secret in business rugged connectivity, offering sturdy and reliable cellular routers that provide excellent value. These routers can be used as either primary or backup routers for businesses, and they are equipped with seamless VPN failover capability to ensure uninterrupted network connectivity. Common features of the MAX BR Series routers include hot failover, advanced network management and GPS tracking, as well as a solid hardened design that makes them suitable for demanding environments. Additionally, the routers are full-function mobile routers, delivering a comprehensive set of features to meet a wide range of networking needs​.

Our Total Access 900e Series is designed for Ethernet or multi-T1 converged voice and data applications and offers robust IP router, firewall, and VPN functionality. It also features four T1 interfaces, one Gigabit, two fast Ethernet interfaces for LAN or WAN facing, and several devices of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices can also add SBC functionality for up to 100 simultaneous calls. Our Total Access 908e offers 8 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243908F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243916F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery.

AirLink routers are engineered to be deployed out-of-the-box without additional programming and have the intelligence to stay connected. The Performance Series of routers are designed for customers who demand the best for mission-critical applications in extremely harsh indoor, vehicle or exposed outdoor locations. They provide the ultimate combination of secure, cellular LTE and Wi-Fi performance, with high availability and network agility in a ruggedized form factor. Industry’s highest-performing 5G router, purpose-built for vehicles. Future-proof, cartridge-based design for additional functions and features. 5 ethernet ports and dual 4X4 MIMO Wi-Fi 6. Remote device management and mobility-focused reporting through AirLink Premium. Single-radio 5G router for fixed applications. Easily expand to dual-radios and to add more functionality with the cartridge-based design. 4 ethernet ports and 5x4 MIMO Wi-Fi 6. Remote device management through AirLink Complete.

For industrial settings where reliability, flexibility and secure systems are critical, Belden’s routers deliver a simplified solution with performance and security in one product. Compliant with IEC 61850, the routers are ideal for large substation installations or similar applications where hardness, performance, security, quality of service and diverse protocols are required. Advanced routing & security, combined capabilities of L3 switching and WAN routing. Expandable & Modular: All gigabit ports with 4-port up to 10-port GbE LAN options in configurable slots. Legacy infrastructure interfacing, support for legacy T1E1 and DDS interfaces, and non-Ethernet communication.

The Cisco® Cloud Services Router 1000v (CSR 1000v) is a virtual-form-factor router that delivers comprehensive WAN gateway and network services functions into virtual and cloud environments. Using familiar, industry-leading Cisco IOS® XE Software networking capabilities, the CSR 1000v enables enterprises to transparently extend their WANs into provider-hosted clouds. Similarly, cloud providers themselves can use it to offer enterprise-class networking services to their tenants or customers. To save costs and become more agile, businesses small and large are increasingly virtualizing their data center infrastructures and applications. Many enterprises have started deploying IT applications in virtualized data centers that are built and managed by third-party service providers. These external data centers, known as provider-hosted clouds, allow enterprises to gain infrastructure and resources on demand and become even more operationally efficient.

Our Total Access 900 Series is designed for Ethernet or multi-T1 applications. It includes four T1 interfaces, one Gigabit, two Fast Ethernet interfaces for LAN or WAN facing, and several platforms of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices also offer the ability to add SBC functionality for up to 100 simultaneous calls. Our Total Access 908 offers a single T1 network interface and 8 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213908F1. Our Total Access 916 offers a single T1 network interface and 16 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213916F1. Our Total Access 908 offers a single T1 network interface and 24 FXS user interfaces for analog voice delivery.

The Nokia 7705 SAR delivers legacy TDM and advanced IP/MPLS services making it ideal for industries, enterprises and governments and for niche applications in IP anyhaul networks. The 7705 SAR provides an easy migration path from TDM networks. With depth in routing protocols, service scaling, security, and timing, it meets the rigorous demands of mission-critical networks. It is available in multiple compact platforms that reduce equipment footprint and energy costs. These platforms deliver highly available services over a wide variety of network topologies. Strong QoS capabilities deliver customer satisfaction and the ability to differentiate service levels. As a member of the industry-leading Nokia Service Router product portfolio, the 7705 SAR runs the Nokia Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform for high-performance end-to-end application delivery and management.

These routers have a rugged industrial hardware design and a highly resilient architecture. They increase the uptime of communications networks and grid availability to help ensure message delivery. Choose from multiple platforms. Built to withstand harsh environments, the IR510 model provides enterprise-class RF mesh connectivity to Ethernet- and serial-enabled IoT devices like recloser controls, cap bank controls, and voltage regulator controls. The ruggedized IR529 model platforms provide range extension functionality to enhance the RF mesh reliability by adding paths and nodes. They also enable connectivity in low-end point density deployments.

The HPE MSR3000 Router Series feature a modular design that delivers unmatched application services for medium to large branch offices. These routers offer Gigabit switching, provide an enhanced PCI bus, ship with the Comware v7 OS, provide a full-featured resilient routing platform including IPv6 and MPLS, offer up to 13 Mpps forwarding capacity and 14.3 Gb/s of IPSec VPN encrypted throughput to ensure high performance with concurrent services. With the Open Application Platform module, the MSR3000 Router Series offers a wide range of virtualized applications. Its distributed architecture and high reliability also strengthen the resiliency of medium to large branches. The MSR3000 series provides an agile, flexible network infrastructure that enables you to quickly adapt to changing business requirements while delivering integrated concurrent services on a single, easy-to-manage platform.

The Nokia 7750 Service Router (SR) portfolio delivers unrivalled performance, scale and versatility for the full array of IP edge and core applications. Communication service providers, cloud, public and private network operators the world over rely on our innovative technology to power their mission-critical networks and services. The Nokia 7750 SR portfolio includes the 7750 SR-s series, 7750 SR series, the 7750 SR-a series, and the 7750 SR-e series. The 7750 SR portfolio offers the scope and flexibility to optimize your IP edge and core applications on a common platform without compromises. Featuring our ground-breaking FP routing silicon and proven Service Router Operating System (SR OS) it addresses a wide range of network functions and services. Scales system capacity up to 432 Tb/s with the flexibility to optimize any network location. Leverages the Nokia FP4 and FP5 network processors to provide deterministic packet forwarding performance at scale.

PTX Series Routers form the foundation of the world’s largest core and peering architectures. Powered by the latest generation of Juniper’s custom Express family ASICs, they’re cloud-optimized to enable smooth 400G migrations. They simultaneously deliver the scale, flexibility, and investment protection needed to meet today’s market needs. The routers offer native 400G inline MACsec, flexible filtering, and a reliable network operating system that has been powering generations of high-performance solutions. Discover what 100G and 400G mass scale in the cloud can offer with PTX routing. The modular PTX10004, PTX10008, and PTX10016 Packet Transport Routers directly address the massive bandwidth demands being placed on networks. They bring ultra-high port density, native 400GbE in-line MACsec, and latest-generation ASIC investment to the most demanding WAN and data center architectures.

The HPE HSR6800 Router Series is a family of high-performance, multiservice routers designed for data center interconnection, enterprise WAN core, campus WAN edge, and high-speed WAN aggregation services. It runs the Comware operating system and features an advanced multi-core, distributed service processing hardware architecture that scales up to 420 Mpps forwarding and up to 2 Tbps switching capacity. The router delivers robust routing, multicast, Multiprotocol Label Switching (MPLS), IPv6, security, quality of service, carrier-level high-availability features, and high-density 10GbE and 1GbE interface options. Fully modular Comware v7 network operating system offers improved performance and system availability. Feature enhancements including ADVPN, IRF2, EVI, EAA, and ISSU. FIP-240 doubles FIP-210 forwarding performance, up to 4 HIM/MIM slots. Line cards offer 1GbE combo/10bGE ports, and increased IPsec performance. RT-HIM-2EXP doubles HIM 10GbE port density and supports SFP+.

Create the network foundation for a next-generation Unified Fabric data center. The modular Cisco Nexus 7000 and 7700 switches deliver a comprehensive Cisco NX-OS feature set and open-source programmable tools for software-defined networking (SDN) deployments. They offer high-density 10, 40, and 100 Gigabit Ethernet with application awareness and performance analytics.

A robust portfolio of software-defined networking (SDN)-enabled routing platforms, the MX Series provides industry-leading system capacity, density, security, and performance with unparalleled longevity. MX Series routers are the key to digital transformation for service providers, cloud operators, and enterprises in the cloud era. The MX304 Universal Routing Platform delivers massive scale and efficiency for space- and power-constrained environments. It is a carrier-grade, multiservice platform with extensive automation capabilities enabling operators to meet constantly expanding bandwidth, subscriber, and service demands. The MX304 Universal Routing Platform delivers 4.8 Tbps of system capacity in a 2 RU unit and supports 96 x 10 or 25 GbE, 48 x 40, 50, or 100 GbE, or 12 x 400 GbE interfaces in a single chassis. The MX10004, MX10008, and MX10016 Universal Routing Platforms deliver unprecedented scale for service provider and cloud operators.

Whether you’re in telecom, retail, or oil & gas, deploy the Bold SR for the functionality & control you need. This lightweight box allows you to connect more than a dozen devices & add-ons, so you can deliver robust capabilities throughout your enterprise. The Bold SR puts you in charge with remote out-of-band management, Secure Access Service Edge, and SD-Branch capabilities. Reduce CAPEX & virtualize your stack. Cut support costs & response times with remote out-of-band. Set up autonomous networking to prevent downtime. Secure your branch networks and more using the Nodegrid Bold SR. Sporting a number of high-density interfaces and powerful ethernet ports, the Bold SR offers versatility anywhere you deploy. From delivering failover & out-of-band to your NOC, to handling every function at your faraway network edge, Bold is your compact solution for all-in-one networking. Virtualize your stack with your choice of SD-WAN, firewall, IoT, and other applications.

It supports robust cybersecurity, Cisco Edge Intelligence, 5G, SD-WAN, and more. Speed and scale are pillars of the IR8300 - it's the first Catalyst to integrate Cisco QuantumFlow and Unified Access Data Plane Technologies. The IR8300 is an integrated routing and switching platform. It's easily upgradeable with modules for public and private 4G LTE, 5G, and more. Get enterprise-grade security and network policies to connect reliably and securely, using Cisco vManage for SD-WAN. Use the platform’s built-in Cisco IOx edge compute to build and run your own applications at the edge. Synchronize network resources that host highly time-sensitive applications. The IR8300 meets substation compliance standards, including IEEE 1613 and IEC 61850-3.

Extend your network visibility, rapidly pinpoint issues, get faster resolution, and actively manage the performance of what matters. Extend your visibility across the internet, the cloud, and SaaS. You can pinpoint application issues and gain actionable insights with Cisco ThousandEyes integration on selected ISR 4000 Series models. Configure and monitor your network and enforce business policies through Cisco DNA Center and Cisco SD-WAN. Simplify network automation and turn hours of work into minutes. Protect your branch site across the LAN and WAN and in the cloud with security integrated into the router. You no longer need a separate security appliance. Deploy key integrated network services for your branch in minutes, virtually or on-premises, without sacrificing performance.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, SFP cage, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and an ideal solution for FTTH (Fiber To The Home) implementations. The RB2011iLS has 11 ports, Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing an affordable wire-speed fiber-to-copper converter, and additional five fast Ethernet ports. The board can be powered by power jack or PoE. Note that SFP transceiver is not included. RB2011iLS supports any 1.25G SFP transceivers that are within the SFF committee specifications for SFP transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network). Tested and recommended to use with MikroTik SFP modules S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.

Enable a variety of WAN connections, including xDSL, Ethernet, 3G/4G LTE, and fiber. The series offers a range of performance levels to meet your needs. Get voice, video, wireless, and data in one integrated router and switch. This desktop form factor is priced affordably for small and midsize businesses. Encryption, VPN, firewall, and URL filtering are all built in. These security features help you protect your customer experience and data. Easily manage the 800 Series with drag-and-click interfaces on your premises or with third-party web-based applications.

5x Ethernet, Small plastic case, 850MHz CPU, 64MB RAM, Most affordable MPLS router, RouterOS L4. hEX lite is a small five-port Ethernet router in a nice plastic case. Its price is lower than the RouterOS license alone, there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all. Not only it’s affordable, small, good-looking, and easy to use, It’s probably the most affordable MPLS-capable router on the market. No more compromise between price and features, RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment. Box contains hEX lite in a plastic case and its power supply. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space.

Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilize this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports and single Ethernet port for management purposes. The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage. Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.

Our NetVanta 3000 Series of fix-port access routers are perfect for carrier-bundled service offerings, and enterprise-class internet access for secure, high-speed corporate connectivity. There are two distinct platforms, the NetVanta 3140 and 3148. The NetVanta 3140 Series supports 100Mbit/s routing performance in a small form factor. The NetVanta 3148 Series supports up to 500Mbit/s routing performance and offers an additional GbE interface, two of which can be fiber-fed. It also features an 8-port Ethernet switch, which can be PoE enabled. Our NetVanta 3140 Series offers two distinct form factors: one is a plastic desktop chassis, while the other is a metal enclosure that can be easily rack mounted. Each device features three routed GbE interfaces and one USB interface for 3G/4G/5G access and supports 100Mbit/s routing performance. VPN and special voice monitoring services can also be added as an optional upgrade.

The HUAWEI WiFi AX3 Series routers are a versatile networking solution that supports various connection methods, including wireless networking, network cable networking, and hybrid networking that combines both wireless and network cables. It is designed to intelligently manage network connections. Unlike traditional routers, you can connect a multitude of devices to AX3 with greater efficiency. Supporting OFDMA multi-user technology, it is capable to send data to multiple devices simultaneously.

The Network Convergence System (NCS) 6000 helps enable superior network agility, packet optical convergence, and petabits-per-second system scale. It facilitates the Cisco Evolved Programmable Network to support virtualization and programmability at low total cost of ownership and delivers high-bandwidth mobile, video, and cloud services to end users. Innovations include Cisco nPower X1 NPUs, hardware-enabled true zero-packet, zero-topology loss ISSU, capability to scale beyond 1 petabit in a multi-chassis configuration, enhanced operations support, and packet-optical integration. Use an adaptable power consumption model for both the ASIC and CMOS photonics technology for the lowest carbon footprint in service provider routing today. Easily adapt each line card's power consumption to the number of ports used.

The Cloud-Native Router takes full advantage of container economics and operational efficiencies, giving service providers the flexibility they need to deploy 5G. The performant, software-based router combines Juniper’s proven routing technology, the Junos OS containerized routing protocol daemon (cRPD), and Contrail vRouter DPDK forwarding plane for x86 processors. It integrates seamlessly with the Kubernetes Container Network Interface (CNI) framework. The router complements Juniper’s physical routers with advanced networking features for cloud-native environments where space, power, and cooling are limited. Based on the same Junos OS routing technology, hybrid physical and virtual networks provide a single experience end to end. The Cloud-Native Router is a key component in the 5G Distributed Radio Access Network (D-RAN) and in 5G Core data centers hosted in hyper scaler cloud environments.

The Peplink UBR Series offers unbreakable connectivity right out of the box, providing a simple and effective solution for achieving highly reliable network connectivity. Designed to enhance network speed and reliability, the UBR Series allows users to connect to multiple mobile networks simultaneously, ensuring optimal performance and minimal downtime. The routers in this series feature concurrent multi-network connectivity, enabling seamless switching between different mobile networks as needed. Additionally, the UBR Series incorporates Peplink's SpeedFusion technology, which offers hot failover and WAN smoothing capabilities, further enhancing the stability and resilience of network connections​.

Our fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance. The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports and serial console port. The new version of CCR1036-8G-2S+ has onboard 4GB of RAM, onboard M.2 PCIe 4x slot, full size USB slot and dual PSU for redundancy!

1U rackmount, 10xGigabit Ethernet, SFP, USB 3.0, LCD, PoE out on port 10, 2x1.4GHz CPU, 1GB RAM, RouterOS L5. The RB3011 is a new multi-port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full-size USB 3.0 port, for adding storage or an external 3G/4G modem. RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

Our NetVanta 4000 Series is ideal for carrier bundled service offerings up to 1Gbit/s, and enterprise-class internet access for secure, high-speed corporate connectivity. Several variations add power over Ethernet (PoE) to the built-in switch, VPN and/or special voice monitoring services. All our NetVanta 4000s can also provide eSBC functionality, delivering a truly converged application platform at the customer premises. What’s more, they can grow via software as your VoIP services expand, supporting up to 1000 calls. Our NetVanta 4148 provides four routed, autosensing Gigabit interfaces, two of which can be fiber-fed, and an 8-port Gigabit Ethernet switch. The Gigabit interfaces can be LAN or WAN-facing and are ideal for Ethernet redundancy with immediate failover if one of the links goes down. Part number 17004148F1. Our NetVanta 4148 with enhanced feature pack upgrade adds the ability to support 500 VPN tunnels.

Internal and expansion modules give you the flexibility to add or upgrade WAN and storage components as technologies and needs evolve. Cisco SD-WAN architecture delivers scale, simplicity, and unified management for extending enterprise networks to a distributed IoT deployment. With its small form-factor (less than 2RU) and low typical power consumption of 10 W, it is easy to install and integrate into space- and power-constrained cabinets. Cisco IOS XE is highly programmable with multilayer security built in. This unified software stack is ideal for process and workflow automation, enabling you to qualify and deploy new services more quickly. The two cellular modules enable concurrent connectivity to two cellular networks for WAN redundancy, enhanced data throughputs, load balancing, and differentiated services. The hardware is future-proofed for 5G.

The HPE MSR95x Router Series delivers high-performance, small-branch routing in a single, cost-optimized form factor. Featuring integrated routing, switching, wireless, security, and voice with no additional licensing, boost your service delivery while simplifying the management of the corporate-wide area network (WAN). This series is flexible to deploy, with Zero Touch Provisioning and WAN options with LTE connectivity. With Comware v7 and fiber connections, the MSR95x also brings the performance and advanced services available on modular routers, such as IPS and high encryption, to a fixed port form factor. Converged high-performance fiber routing, switching, security, and 3 Mpps performance. Integrated 1/10GbE, WAN and LAN, fiber (SFP). Integrated 4G LTE, 3G as well as IEEE 802.11b/g/n WLAN in one box. Embedded encryption, stateful firewall, NAT, ADVPN security features. Inified Comware v7 OS, Comware v7 OS zero-touch solution, and single-pane-of-glass management.

Our NetVanta 6250 Series is designed to deliver converged voice and data services, including legacy T1 access and Ethernet delivery. It utilizes SIP or MGCP for VoIP applications, providing interoperability with industry-leading soft switches, servers, and gateways. Acting as a gateway, these devices convert IP signaling from the carrier into traditional TDM analog and digital voice services. This functionality enables our NetVanta 6250 Series to simultaneously deliver voice services to IP phones and traditional telephony equipment. All NetVanta 6250 devices support one Gigabit combo port for copper or fiber delivery, four Fast Ethernet ports for both WAN or LAN access, a USB port for wireless backup or storage, and four T1 ports for legacy PBX connections. Additional software upgrades are available to add SBC functionality, VPN and voice quality monitoring (VQM), a graphically intuitive interface displaying captured data for mean opinion score (MOS).