Cisco 800 Series Routers Alternatives

The HPE FlexNetwork MSR1000 Router Series delivers high-performance, small branch routing up to 500 Kpps in a cost-optimized modular form factor. Featuring integrated routing, switching, security, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With Comware v7 and a convenient modular design, the HPE FlexNetwork MSR1000 brings enhanced performance and advanced services, as well as a choice of connectivity options to provide flexible, open standards and lasting investment protection with lower CAPEX and OPEX for small-sized branches. Up to 500 Kpps IP forwarding; converged high-performance routing, switching, security, voice, and mobility. Embedded security features with hardware-based encryption, firewall, network address translation (NAT), and VPNs. Supports OpenFlow that enables integration with mainstream cloud platforms or a third-party controller for flexible network customization.

The HPE MSR95x Router Series delivers high-performance, small-branch routing in a single, cost-optimized form factor. Featuring integrated routing, switching, wireless, security, and voice with no additional licensing, boost your service delivery while simplifying the management of the corporate-wide area network (WAN). This series is flexible to deploy, with Zero Touch Provisioning and WAN options with LTE connectivity. With Comware v7 and fiber connections, the MSR95x also brings the performance and advanced services available on modular routers, such as IPS and high encryption, to a fixed port form factor. Converged high-performance fiber routing, switching, security, and 3 Mpps performance. Integrated 1/10GbE, WAN and LAN, fiber (SFP). Integrated 4G LTE, 3G as well as IEEE 802.11b/g/n WLAN in one box. Embedded encryption, stateful firewall, NAT, ADVPN security features. Inified Comware v7 OS, Comware v7 OS zero-touch solution, and single-pane-of-glass management.

The HPE MSR4000 Router Series deliver high-performance large branch routing with up to 36 Mpps in a cost-optimized form factor. Featuring integrated routing, switching, security, VPN, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With the Open Application Platform module, the MSR4000 Router Series offers a wide range of virtualized applications. Its distributed, modular architecture and high reliability also strengthen the resiliency of large branches. Enhances security with built-in IPS and optional HPE IPS filter subscription, as well as a zone-based and stateful firewall. OpenFlow facilitates Software-defined Networking (SDN). WAN optimization and Intelligent Resilient Fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN, and VPLS. Fiber LAN switching and high-density E1/T1 modules. The HPE MSR4000 Router Series simplifies your network through integrated routing, switching, security, voice, etc.

Our NetVanta 3000 Series of fix-port access routers are perfect for carrier-bundled service offerings, and enterprise-class internet access for secure, high-speed corporate connectivity. There are two distinct platforms, the NetVanta 3140 and 3148. The NetVanta 3140 Series supports 100Mbit/s routing performance in a small form factor. The NetVanta 3148 Series supports up to 500Mbit/s routing performance and offers an additional GbE interface, two of which can be fiber-fed. It also features an 8-port Ethernet switch, which can be PoE enabled. Our NetVanta 3140 Series offers two distinct form factors: one is a plastic desktop chassis, while the other is a metal enclosure that can be easily rack mounted. Each device features three routed GbE interfaces and one USB interface for 3G/4G/5G access and supports 100Mbit/s routing performance. VPN and special voice monitoring services can also be added as an optional upgrade.

The HPE FlexNetwork MSR2000 Router Series delivers high-performance, medium branch routing up to 4 Mpps in a cost-optimized modular form factor. Featuring integrated routing, switching, security, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With its convenient modular design, the HPE FlexNetwork MSR2000 Router Series offers a choice of connectivity options to provide flexible, open standards and lasting investment protection with lower CAPEX and OPEX and is ideal for medium-sized branches. Up to 4 Mpps forwarding; converged high-performance routing, switching, security, voice, and mobility. Embedded security features with hardware-based encryption, firewall, NAT, and VPNs. Integrated 1/10 GbE WAN and LAN, fiber (SFP). No additional licensing complexity; no cost for advanced features. Zero-touch solution, with single-pane-of-glass management.

Get increased mobility and next-generation WAN and LAN options. Access Ethernet, DSL, 5G, and 802.11ax Wi-Fi. The 1000 Series is ideal for use as customer premises equipment (CPE). Automate deployment, configuration, and management of the 1000 Series with Cisco vManage. A centralized, highly visual dashboard simplifies and extends controls across the SD-WAN fabric and to the cloud edge. Gain enterprise-class security. Cisco Umbrella, Encrypted Traffic Analytics, and advanced threat defense provide high-performance encryption, VPN, firewall, and URL filtering. Cisco Trust Anchor technology protects your network firmware from threats. The 1000 Series are the first fixed-configuration routers with the trusted Cisco IOS XE Software. Cisco IOS XE Software is optimized for cloud connectivity, enhanced visibility, and full-stack security, with robust multicloud capabilities.

Our NetVanta 6250 Series is designed to deliver converged voice and data services, including legacy T1 access and Ethernet delivery. It utilizes SIP or MGCP for VoIP applications, providing interoperability with industry-leading soft switches, servers, and gateways. Acting as a gateway, these devices convert IP signaling from the carrier into traditional TDM analog and digital voice services. This functionality enables our NetVanta 6250 Series to simultaneously deliver voice services to IP phones and traditional telephony equipment. All NetVanta 6250 devices support one Gigabit combo port for copper or fiber delivery, four Fast Ethernet ports for both WAN or LAN access, a USB port for wireless backup or storage, and four T1 ports for legacy PBX connections. Additional software upgrades are available to add SBC functionality, VPN and voice quality monitoring (VQM), a graphically intuitive interface displaying captured data for mean opinion score (MOS).

The Cisco® 900 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as Customer Premises Equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. The Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro Ethernet and wireless LTE WAN connectivity. Service providers offering both managed Ethernet and wireless LTE WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, SFP cage, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and an ideal solution for FTTH (Fiber To The Home) implementations. The RB2011iLS has 11 ports, Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing an affordable wire-speed fiber-to-copper converter, and additional five fast Ethernet ports. The board can be powered by power jack or PoE. Note that SFP transceiver is not included. RB2011iLS supports any 1.25G SFP transceivers that are within the SFF committee specifications for SFP transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network). Tested and recommended to use with MikroTik SFP modules S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.

The Cisco® ASR 920 Series Aggregation Services Router (ASR) is a full-featured converged access platform designed for the cost-effective delivery of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in a compact package. It also enables service providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from within the access layer. The Cisco ASR 920 Series offers key Carrier Ethernet features that simplify network operation; you can use them for premium services with enhanced service-level agreements (SLAs). An optional "pay-as-you-grow" feature and service activation model makes the Cisco ASR 920 Series flexible and cost-effective.

Our NetVanta 4000 Series is ideal for carrier bundled service offerings up to 1Gbit/s, and enterprise-class internet access for secure, high-speed corporate connectivity. Several variations add power over Ethernet (PoE) to the built-in switch, VPN and/or special voice monitoring services. All our NetVanta 4000s can also provide eSBC functionality, delivering a truly converged application platform at the customer premises. What’s more, they can grow via software as your VoIP services expand, supporting up to 1000 calls. Our NetVanta 4148 provides four routed, autosensing Gigabit interfaces, two of which can be fiber-fed, and an 8-port Gigabit Ethernet switch. The Gigabit interfaces can be LAN or WAN-facing and are ideal for Ethernet redundancy with immediate failover if one of the links goes down. Part number 17004148F1. Our NetVanta 4148 with enhanced feature pack upgrade adds the ability to support 500 VPN tunnels.

Our Total Access 900e Series is designed for Ethernet or multi-T1 converged voice and data applications and offers robust IP router, firewall, and VPN functionality. It also features four T1 interfaces, one Gigabit, two fast Ethernet interfaces for LAN or WAN facing, and several devices of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices can also add SBC functionality for up to 100 simultaneous calls. Our Total Access 908e offers 8 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243908F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243916F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery.

The Cisco® Cloud Services Router 1000v (CSR 1000v) is a virtual-form-factor router that delivers comprehensive WAN gateway and network services functions into virtual and cloud environments. Using familiar, industry-leading Cisco IOS® XE Software networking capabilities, the CSR 1000v enables enterprises to transparently extend their WANs into provider-hosted clouds. Similarly, cloud providers themselves can use it to offer enterprise-class networking services to their tenants or customers. To save costs and become more agile, businesses small and large are increasingly virtualizing their data center infrastructures and applications. Many enterprises have started deploying IT applications in virtualized data centers that are built and managed by third-party service providers. These external data centers, known as provider-hosted clouds, allow enterprises to gain infrastructure and resources on demand and become even more operationally efficient.

Cisco ASR 1000 Series Aggregation Services Routers provide a Software Defined WAN platform that aggregates multiple WAN connections and network services including encryption and traffic management, and forward them across WAN connections at line speeds from 2.5 to 200 Gbps. The routers contain both hardware and software redundancy in an industry-leading high-availability design. The latest additions to the Cisco ASR 1000 Series are the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router. Both new routers support up to 100 Gbps in a 2-Rack-Unit (2RU) and 60 Gbps in a 1-Rack-Unit (1RU) form factor, respectively. The ASR 1002-HX has 8 built-in 10 Gigabit Ethernet (GE) ports and 8 1 GE ports, with the Ethernet Port Adapter (EPA) slot for expansion. The ASR 1001-HX has 4 built-in 10 GE ports, 8 1 GE ports, and 4 configurable 10 GE or 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 is the newest addition to the modular control plane engines in the Cisco ASR 1000 Series.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, USB, LCD, PoE out on port 10, 600MHz CPU, 128MB RAM, RouterOS L5. The RB2011 is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present.

5x Gigabit Ethernet, Dual Core 880MHz CPU, 256MB RAM, USB, microSD, RouterOS L4. hEX is a five-port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full-size USB port. This new updated revision of the hEX brings several performance improvements. It is affordable, small and easy to use, but at the same time comes with a very powerful dual-core 880MHz CPU and 256MB RAM, capable of all the advanced configurations that RouterOS supports. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, the microSD slot on it provides improved r/w speed for file storage and Dude. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

The ASR 900 Series is a modular aggregation platform that delivers cost-effective converged mobile, residential, and business services. You get redundancy, a shallow depth, low power consumption, and high service scale in routers packed with useful features and optimized for small aggregation and remote point-of-presence (POP) applications. Deliver a greatly enhanced broadband customer experience. This series supports broadband aggregation for voice, video, data, and mobility services. It supports thousands of subscribers, and QoS scales to a large number of queues per device. Deployed as a pre-aggregation platform for mobile backhaul, the series can aggregate cell sites and use MPLS as a transport for RAN backhaul traffic. Get the timing services required in today’s converged access networks. The series offers integrated support for a variety of interfaces and can act as the source for network clocking for GPS and other interfaces.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, USB, LCD, PoE out on port 10, 600MHz CPU, 128MB RAM, RouterOS L5. The RB2011 is a low-cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring - are just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five fast Ethernet LAN ports, but also has RJ45 serial port, USB port, and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature, a power injector on Ethernet port 10, it can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! The maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports.

Five Gigabit Ethernet router with 4xPoE-out ports, SFP cage, and outdoor enclosure. The PowerBox Pro is an outdoor five-gigabit Ethernet port router with PoE output on four ports. Since the device has a weatherproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! It can power 802.3at and af mode B compatible devices if 48-57 input voltage is used. The device has an SFP port for adding optical fiber connectivity. It is affordable, small, and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use.

Desktop metal case, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011iL-IN is the most basic model, with five Gigabit Ethernet ports, five Fast Ethernet ports, a power jack, and PoE support. It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. There is a PoE output function for port #10, it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA. RouterBOARD 2011iL-IN comes with a desktop enclosure and power supply. The wall mount kit for the network closet is available for purchase as an optional accessory. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use.

The HUAWEI WiFi AX3 Series routers are a versatile networking solution that supports various connection methods, including wireless networking, network cable networking, and hybrid networking that combines both wireless and network cables. It is designed to intelligently manage network connections. Unlike traditional routers, you can connect a multitude of devices to AX3 with greater efficiency. Supporting OFDMA multi-user technology, it is capable to send data to multiple devices simultaneously.

AirLink routers are engineered to be deployed out-of-the-box without additional programming and have the intelligence to stay connected. The Performance Series of routers are designed for customers who demand the best for mission-critical applications in extremely harsh indoor, vehicle or exposed outdoor locations. They provide the ultimate combination of secure, cellular LTE and Wi-Fi performance, with high availability and network agility in a ruggedized form factor. Industry’s highest-performing 5G router, purpose-built for vehicles. Future-proof, cartridge-based design for additional functions and features. 5 ethernet ports and dual 4X4 MIMO Wi-Fi 6. Remote device management and mobility-focused reporting through AirLink Premium. Single-radio 5G router for fixed applications. Easily expand to dual-radios and to add more functionality with the cartridge-based design. 4 ethernet ports and 5x4 MIMO Wi-Fi 6. Remote device management through AirLink Complete.

The HPE MSR3000 Router Series feature a modular design that delivers unmatched application services for medium to large branch offices. These routers offer Gigabit switching, provide an enhanced PCI bus, ship with the Comware v7 OS, provide a full-featured resilient routing platform including IPv6 and MPLS, offer up to 13 Mpps forwarding capacity and 14.3 Gb/s of IPSec VPN encrypted throughput to ensure high performance with concurrent services. With the Open Application Platform module, the MSR3000 Router Series offers a wide range of virtualized applications. Its distributed architecture and high reliability also strengthen the resiliency of medium to large branches. The MSR3000 series provides an agile, flexible network infrastructure that enables you to quickly adapt to changing business requirements while delivering integrated concurrent services on a single, easy-to-manage platform.

Like the other models in CCR2004 series, this CCR also features the Amazon Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores. While this CPU is running at 1.2 GHz, the router can be 3x as fast than the previous generation CCR’s. This is the silent powerhouse. Enjoy all the power of a real CCR in peace and quiet. Get rid of all the hum and buzz in your office, studio, server room or homelab without sacrificing the performance! The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a RJ-45 console port on the front panel. Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.

The Cisco Wireless Gateway for LoRaWAN and Cisco Interface Module for LoRaWAN, available with Cisco Catalyst 1100 Rugged Series Routers, enable IoT implementations mandating low data rates and battery-powered end devices over long-distance connectivity. The products use long-range (LoRa) technology and comply with long-range wide-area network (LoRaWAN) specifications, defined by the LoRa Alliance. The gateway embeds digital signal processor (DSP) capabilities and high-accuracy GPS specifically designed for geolocation. Optional integrated cellular backhaul is available through connectivity to a Cisco Catalyst IR1100 Rugged Series Router. Improve spectrum utilization with up to 16 uplink channels with the gateway or up to 8 channels with the module.

The NCS 500 Series offers a secure and highly available access-routing platform for service providers. Both fixed and modular form factors support advanced automation and programmability to provide 5G, Remote PHY, Carrier Ethernet, and FTTx. The NCS 540 and NCS 560 are built for 5G with advanced timing, ultra-low latency, and ultra-high capacity. They provide the foundation for pervasive Mobile Broadband (MBB), massive IoT, tactile Internet, smart cities, and AR/VR. Build application-aware networks with segment routing, open and programmable interfaces using NETCONF and YANG data models and APIs, and real-time visibility with streaming telemetry. Intelligently converge network services onto a single platform with the highly scalable and energy efficient NCS 500 Series. Flexibly scale capacity with ports that support 1/10/25/40/100 GbE.

Double the usual performance: we took your feedback from the MikroTik User Meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.RB5009 has it all, and even more! The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink! Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads.

Huawei NetEngine 8000 series routers provide an all-service, intelligent router platform designed for the cloud era. Using ultra-broadband pipes to construct simplified networks, and Segment Routing (SR) and Segment Routing over IPv6 (SRv6) protocols to establish intelligent connections, NetEngine 8000 combines with Huawei's next-generation Network Cloud Engine (NCE) to implement full-lifecycle automation and proactive Operations and Maintenance (O&M). An intent-driven approach frees customers from unnecessary constraints, unleashing network potential. Available in a range of form factors and applicable to core, aggregation, and access networks, the award-winning NetEngine 8000 offers high performance and reliability, with low power consumption and full evolution capabilities. Applications include functioning as a core node for an enterprise Wide Area Network (WAN), as an access node on a large enterprise network, as a Data Center Interconnect (DCI) node.

The HPE HSR6800 Router Series is a family of high-performance, multiservice routers designed for data center interconnection, enterprise WAN core, campus WAN edge, and high-speed WAN aggregation services. It runs the Comware operating system and features an advanced multi-core, distributed service processing hardware architecture that scales up to 420 Mpps forwarding and up to 2 Tbps switching capacity. The router delivers robust routing, multicast, Multiprotocol Label Switching (MPLS), IPv6, security, quality of service, carrier-level high-availability features, and high-density 10GbE and 1GbE interface options. Fully modular Comware v7 network operating system offers improved performance and system availability. Feature enhancements including ADVPN, IRF2, EVI, EAA, and ISSU. FIP-240 doubles FIP-210 forwarding performance, up to 4 HIM/MIM slots. Line cards offer 1GbE combo/10bGE ports, and increased IPsec performance. RT-HIM-2EXP doubles HIM 10GbE port density and supports SFP+.

PTX Series Routers form the foundation of the world’s largest core and peering architectures. Powered by the latest generation of Juniper’s custom Express family ASICs, they’re cloud-optimized to enable smooth 400G migrations. They simultaneously deliver the scale, flexibility, and investment protection needed to meet today’s market needs. The routers offer native 400G inline MACsec, flexible filtering, and a reliable network operating system that has been powering generations of high-performance solutions. Discover what 100G and 400G mass scale in the cloud can offer with PTX routing. The modular PTX10004, PTX10008, and PTX10016 Packet Transport Routers directly address the massive bandwidth demands being placed on networks. They bring ultra-high port density, native 400GbE in-line MACsec, and latest-generation ASIC investment to the most demanding WAN and data center architectures.

If you need more capabilities at your NOC, or less mess at your branch offices, the Gate SR is the all-in-one solution you need. At your data center or remote locations, this workhorse connects you to dozens of physical assets while helping virtualize more of your network. Deploy fast, save time, and cut CAPEX & OPEX with the appliance that streamlines network management. Quickly set up all your solutions using one powerful box. Get plug-and-play deployments with zero-touch provisioning. Virtualize more functions & cut your stack with an all-in-one device. Get effortless deployments by connecting dozens of assets to a single box, including PoE IoT devices. Virtualize your environment, host third-party applications, and control everything (even device power) thanks to remote out-of-band management. Weighing in at just two pounds, the Gate SR is the perfect platform for consolidated infrastructure management.

The Cisco® NCS 560 Series Router delivers a cost-effective, modular solution based on a protocol-independent fabric architecture. The Cisco NCS 560 Series Router, as part of the Cisco Evolved Programmable Network (EPN) architecture, is capable of delivering unbounded scale and unmatched capabilities for Carrier Ethernet business services, over redundant and protected packet-based network technologies (IP/MPLS, MPLS-TE, SR, SR-TE, TI-LFA). The Cisco NCS 560 Series Router Ethernet interface modules are designed to give customers a high degree of flexibility and value. All Ethernet interface modules share a common core that supports time stamping on the module for Y.1731 Operations, Administration, and Maintenance (OAM) delay measurement functions to achieve precise results for one-way and two-way delay measurement. The modules also provide time-stamping functions for the IEEE 1588-2008 protocol.

Cisco® 8000 Series routers complete this journey. They deliver provider-class routing functionality at unmatched density, performance, and power. This enables Cisco 8000 Series to be deployed into an unprecedented range of routing roles – all supported with a single ASIC architecture and operating system – thus streamlining qualification, deployment, and operations. The Cisco 8000 Series combines the revolutionary Cisco Silicon One™, IOS XR® software, and a set of clean sheet chassis to deliver a breakthrough in high-performance routers. The 8000 Series comprises a full range of feature-rich, highly scalable, deep-buffered, on-chip High Bandwidth Memory (HBM) and 400 Gigabit Ethernet (GbE)-optimized routers ranging from 10.8 to 25.6 Tbps in a 1 RU footprint. It is also available in an industry leading, rack-mountable modular system capable of 518.4 Tbps of full-duplex, line rate forwarding.

There are two ways to look at the brand new Fiber Box Plus. On the one hand, it’s a massive upgrade of our previous FiberBox devices. This version features a modern ARM CPU, more RAM, and four 10-Gigabit SFP+ ports. Fast and reliable connectivity on a budget. Without the distance limitations of Ethernet. There’s also a Gigabit Ethernet port for management purposes or PoE-in powering. We’ve also included a 2-pin terminal and a standard DC jack, so you have 3 different power options to choose from. FiberBox Plus supports a wide input voltage range of 24-57V. And it is remarkably efficient: maximum power consumption (without attachments) is only 7W. Another way to look at the new FiberBox Plus – it’s a budget version of the amazing netFiber 9. You can save a lot of money if you don’t need the extra Gigabit SFP ports. It even features the same impressive Marvell 98DX226S switch-chip, so the performance is definitely there!

CCR1016-12G is an industrial grade router with a cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is your best choice. Unit is equipped with 12 x Gigabit Ethernet ports and color touchscreen LCD. The device comes preinstalled with RouterOS and is ready to use. The device is compatible with RouterOS v6.46 and newer, if your device comes preinstalled with an earlier version, please upgrade before using it. The Ethernet ports 1 has a default IP address for connecting: 192.168.88.1 user name: admin, and there is no password (or, for some models, check user and wireless passwords on the sticker).

The Peplink UBR Series offers unbreakable connectivity right out of the box, providing a simple and effective solution for achieving highly reliable network connectivity. Designed to enhance network speed and reliability, the UBR Series allows users to connect to multiple mobile networks simultaneously, ensuring optimal performance and minimal downtime. The routers in this series feature concurrent multi-network connectivity, enabling seamless switching between different mobile networks as needed. Additionally, the UBR Series incorporates Peplink's SpeedFusion technology, which offers hot failover and WAN smoothing capabilities, further enhancing the stability and resilience of network connections​.

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space.

Edge networks serve billions of devices with low-latency services. You need feature rich routers that economically scale with bandwidth demand. The ASR 9000 series is your edge routing device capable of supporting the application performance required to power 5G service needs. Enhanced security including Secure Boot, Cisco Trust Anchor, and anti-counterfeit measures. With a Secure Development Lifecycle to ensure manufactured integrity. Investment protection for ASR 9000 with continued software and hardware innovations. Custom ASIC optimized to balance performance with a 100x capacity increase and a 96% power reduction per Gbps. With real-time telemetry, segment routing, and Ethernet Virtual Private Networks (EVPNs).

Our Total Access 900 Series is designed for Ethernet or multi-T1 applications. It includes four T1 interfaces, one Gigabit, two Fast Ethernet interfaces for LAN or WAN facing, and several platforms of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices also offer the ability to add SBC functionality for up to 100 simultaneous calls. Our Total Access 908 offers a single T1 network interface and 8 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213908F1. Our Total Access 916 offers a single T1 network interface and 16 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213916F1. Our Total Access 908 offers a single T1 network interface and 24 FXS user interfaces for analog voice delivery.

5x Ethernet, Small plastic case, 850MHz CPU, 64MB RAM, Most affordable MPLS router, RouterOS L4. hEX lite is a small five-port Ethernet router in a nice plastic case. Its price is lower than the RouterOS license alone, there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all. Not only it’s affordable, small, good-looking, and easy to use, It’s probably the most affordable MPLS-capable router on the market. No more compromise between price and features, RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment. Box contains hEX lite in a plastic case and its power supply. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

For industrial settings where reliability, flexibility and secure systems are critical, Belden’s routers deliver a simplified solution with performance and security in one product. Compliant with IEC 61850, the routers are ideal for large substation installations or similar applications where hardness, performance, security, quality of service and diverse protocols are required. Advanced routing & security, combined capabilities of L3 switching and WAN routing. Expandable & Modular: All gigabit ports with 4-port up to 10-port GbE LAN options in configurable slots. Legacy infrastructure interfacing, support for legacy T1E1 and DDS interfaces, and non-Ethernet communication.

5xEthernet with PoE output for four ports, USB, 650MHz CPU, 64MB RAM, RouterOS L4. hEX PoE lite is a small five-port Ethernet router in a plastic case, it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded. It is affordable, small, and easy to use. With its compact design and clean looks, it will fit perfectly into any SOHO environment. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase. This device can supply PoE powering to external devices from its Ethernet ports. This is convenient as you don't need any additional PoE injectors to power other devices.

The Network Convergence System 5000 Series is designed to economically scale large enterprise, over-the-top (OTT), and service provider data center networking architectures. The 5000 Series routers offers 960-Gbps throughput with 1.4 Bpps. They also have a small footprint, and consume less power. Get a dense, programmable solution that supports application hosting, machine-to-machine (M2M) interfacing, telemetry, and flexible package delivery for software feature enhancements. Cisco nV technology dramatically reduces operational costs and simplifies the network through the use of the Cisco ASR 9000 Series distributed control plane.

SCALANCE M includes mobile wireless routers and routers for wired communication. The routers have been proven in a variety of applications that require industrial remote access. Using SCALANCE M mobile wireless routers, both stationary and mobile stations can be connected to a central control and monitoring system via 3G (UMTS), 4G (LTE), or 5G. The wired routers of the SCALANCE M product family support the cost-effective, secure connection of remote machines and plants with SHDSL, ADSL, or PROFIBUS / MPI. The SCALANCE M accessories portfolio includes a wide range of mobile wireless antennas for different applications. SCALANCE M industrial routers can be used universally in telecontrol, teleservice, and any other application for industrial remote communication. SCALANCE M industrial routers enable the connection of remote machines and plants to public or private remote networks. Communication takes place wirelessly using GSM (2G), UMTS (3G), or LTE (4G) or wired via ADSL and SHDSL.

Remain connected with high-performance routing, including built-in firewall, intrusion detection, and fully-integrated 4G LTE failover. Datto Networking’s cloud-managed Datto Networking Appliance (DNA) and D200 Edge Routers combine high-performance routing, firewall, web content filtering and fully integrated 4G LTE Internet failover, everything needed to deploy a network for SMB clients. The stateful firewall and the DNA’s intrusion detection and prevention help enhance the security of the network.

Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.But that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the CCR devices. Better for the planet, better for the bills, it’s a win-win! The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel. Like all CCR devices, it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included, so you have one less thing to worry about. And, of course, there is active cooling to keep things nice and cool.

HUAWEI WiFi AX2 comes equipped with 5 GHz and 2.4 GHz bands that operate simultaneously and automatically switch devices between 5 GHz and 2.4 GHz bands to ensure that they enjoy an optimal connection at all times. 5 GHz is ideal for high-speed gaming and streaming, whereas 2.4 GHz provides for broader coverage. Multiple routers placed can be grouped under a single Wi-Fi name, when you link your HUAWEI WiFi AX2 with the other HUAWEI routers throughout your home, with automatic switching as you move around. HUAWEI WiFi AX2 comes with three Gigabit Ethernet ports, each of which supports WAN/LAN auto-adaptation4, sparing you from having to distinguish between them and making broadband installation a sheer breeze. With AX2, you can check the Wi-Fi coverage map for your home, view the network status at a glance, and easily solve network issues by following the suggested tips. Manage your router with a few taps of your phone to connect devices, and manage your online activities.

The Cisco 2010 Connected Grid Router, the first in the Cisco 2000 Series, is an ideal platform to support the communications requirements of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This product has been extensively tested and is KEMA-certified to meet challenging substation compliance standards, including IEEE 1613 and IEC 61850-3. Cisco IOS Software delivers the benefits of integrated security for NERC/CIP compliance, quality of service, and network management to help ensure integrity and priority of operational data communications. Rugged industrial design and substation compliance with IEC-61850-3 and IEEE 1613 for utility substation environments. Support for a series of WAN connectivity options using Grid Router WAN Interface Cards (GRWICs).

The 7210 SAS product family provides the deployment flexibility, service richness and reliability you need to extend segment routing, IP/MPLS, and Carrier Ethernet to the access points of your network. With a wide variety of platforms, it is used for business VPN, residential broadband, demarcation, and mobile backhaul, and is also widely used in industry, public sector, and enterprise applications. Ready your network for future growth with high-density GE and 10GE interfaces, 100 GE uplinks, and up to 2 Tb/s throughput. Offer competitive services based on high availability and quality of service. As a member of the industry-leading Nokia Service Router product portfolio, the 7210 SAS runs the Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform (NSP) for high-performance, end-to-end service delivery and management and carrier-SDN integration. 7210 SAS supports differentiated services, including Carrier Ethernet, IP VPN, and enhanced services.