CAEmate Alternatives

DigitalClone® for Engineering is the world's only gearbox reliability prediction solution integrating multiple scales of analysis in a single software package. In addition to modeling and analysis capabilities at the gearbox and gear/bearing levels, DC-E is the only solution available that models fatigue life based on detailed, physics-based models of the material microstructure (US Patent 10474772B2). DC-E enables construction of a gearbox digital twin with high value across all stages of the lifecycle of the physical asset - from design and manufacturing optimization to component supplier selection to failure root cause analysis to condition-based maintenance and to prognostics. This computational environment drives down the time and cost to bring new designs to the market and to sustain them over time.

There are billions of devices in homes, factories, oil wells, hospitals, cars, and thousands of other places. With the proliferation of devices, you increasingly need solutions to connect them, and collect, store, and analyze device data. AWS has broad and deep IoT services, from the edge to the cloud. AWS IoT is the only cloud vendor to bring together data management and rich analytics in easy-to-use services designed for noisy IoT data. AWS IoT offers services for all layers of security, including preventive security mechanisms, like encryption and access control to device data, and service to continuously monitor and audit configurations. AWS brings AI and IoT together to make devices more intelligent. You can create models in the cloud and deploy them to devices where they run 2x faster compared to other offerings. Optimize operations by easily creating digital twins of real-world systems. Run analytics on volumes of IoT data easily—without building an analytics platform.

SkyCiv Structural 3D is a cloud-based Structural Analysis software that allows users to model, analyze and design complex 3D structures. It is completely online; requiring no installation to use. SkyCiv Structural 3D offers the very best in online structural analysis. It includes the following: - Powerful Analysis: Linear, P-Delta, Cables, Buckling, Plates, Frequency, RS - Integrated Design checks for steel, wood, connections, foundations, wind (AISC, NSD, AISI, EN, AS, CSA, BS plus more...)

An analytics-driven, simulation-based digital twin is a connected, virtual replica of an in-service physical asset — in the form of an integrated multidomain system simulation —that mirrors the life and experience of the asset. Hybrid digital twins enable system design and optimization and predictive maintenance, and they optimize industrial asset management. By implementing Ansys Twin Builder, you can improve top-line revenue, manage bottom-line costs and both gain and retain a competitive advantage. Ansys Twin Builder enables you to quickly create a digital twin–a connected replica of an in-service asset. This allows for enhanced lifecycle management and true predictive maintenance, saving costs to help maintain a competitive advantage.

The Akselos Cloud platform delivers a complete Digital Twin framework via the cloud. It provides an end-to-end solution covering automated updates of asset loads and condition, through to clear dashboards showing current asset integrity. No more limitations, Akselos technology enables you to model the most complex problems in structures of any size, and in full detail. Our approach runs structural simulations a 1000x faster than legacy software. Design and operational workflows that used to take months can now be done in hours. Any relevant data, such as sensors and process parameters, can be directly connected to our models, allowing you to optimize your asset even further. All of our simulations will validate results against the applicable engineering code/standards, so that you can feel confident you asset is safe and meets all the relevant requirements.

From digital twins for virtual commissioning to system-level models for complex engineering design projects, MapleSim is an advanced modeling tool that helps you reduce development time, lower costs, and diagnose real-world performance issues. Remove vibrations with better control code, not hardware upgrades. Diagnose root-cause performance issues with detailed simulation results. Validate new design performance before physical prototyping. MapleSim is an advanced system-level modeling and simulation tool that applies modern techniques to dramatically reduce model development time, provide greater insight into system behavior, and produce fast, high-fidelity simulations. Scale and connect as the needs of your simulations grow more complex. Take your designs further with our flexible modeling language. Combine components across different domains in a virtual prototype. Solve tough machine performance problems.

Siemens NX software is a flexible and powerful integrated solution that helps you deliver better products faster and more efficiently. NX delivers the next generation of design, simulation, and manufacturing solutions that enable companies to realize the value of the digital twin. Supporting every aspect of product development, from concept design through engineering and manufacturing, NX gives you an integrated toolset that coordinates disciplines, preserves data integrity and design intent, and streamlines the entire process. A generative design process is one that engineers can adopt to quickly develop new products based upon meeting design constraints. It is an iterative process that produces fast results the engineer can refine via constraint variation to narrow in on the best design to meet the requirements.

Seebo enables process manufacturers to predict and prevent unexpected process inefficiencies that continually damage production yield and quality. The company’s solutions empower production teams to discover their most painful losses and when they will happen next. Seebo solutions serve manufacturers across industries – including Nestle, Procter & Gamble, Hovis, Super Bock, Allnex, and many more. Production teams use the Seebo digital twin on a daily basis to turn actionable and accurate predictive insights into timely action that drives continuous improvement in throughput and quality. Proprietary Artificial Intelligence technology pioneered by Seebo, is designed to prevent quality and yield losses. Artificial intelligence your manufacturing teams can use. Know when to act to prevent inefficiencies. Seebo's proprietary AI technology provides unique benefits to manufacturers.

It can be challenging when the data you need for digital twins is in incompatible formats and different data sources from different vendors. It really shouldn't be that hard to create, visualize and analyze digital twins. Like you, we are engineers who are passionate about solving problems, and our software has helped solve some of the most complex engineering challenges in infrastructure. Combine engineering data, reality data, and IoT data. Create an immersive experience in 3D / 4D. Gain a deeper understanding of infrastructure assets. Unlock the value of digital data and make a difference. Provide the digital capabilities that drive business success. A digital twin is a digital representation of a physical asset, process or system, which allows us to understand and model its performance. Digital twins are continuously updated with data from multiple sources – which is what makes them different from static, 3D models.

Apply advanced analytics and machine learning to reduce operational costs and risks. Digital twins are a key piece of the digital transformation puzzle. They create an accurate virtual replica of physical objects, assets, and systems to boost productivity, streamline operations and increase profits. Digital Twin is most commonly defined as a software representation of a physical asset, system or process designed to detect, prevent, predict, and optimize through real time analytics to deliver business value. At GE Digital, we are focused on how digital twin software can help our customers across three core areas: Asset, Network, and Process. Monitor, simulate and control an asset, process or network as an effective strategy to improve system performance. Protect the health and safety of employees, the environment, and business objectives, by reducing asset- and process-related incidents and avoiding unplanned downtime.

Powered by the 3DEXPERIENCE® platform, SIMULIA delivers realistic simulation applications that enable users to reveal the world we live in. SIMULIA applications accelerate the process of evaluating the performance, reliability and safety of materials and products before committing to physical prototypes. Delivers powerful simulation of structures, fluids, multibody, and electromagnetics scenarios including complex assemblies directly linked with the product data. Modeling, simulation, and visualization technology are fully integrated on the 3DEXPERIENCE Platform, including process capture, publication, and re-use. The value of the customer’s existing investment in simulation horsepower is maximized by allowing simulation data, results, and IP to connect to the platform and become true corporate assets that powers innovation for all users.

Subject your designs to real world conditions to raise product quality while reducing prototyping and physical testing costs. SOLIDWORKS® Simulation is an easy-to-use portfolio of structural analysis tools that use Finite Element Analysis (FEA) to predict a product’s real-world physical behavior by virtually testing CAD models. The portfolio provides linear, non-linear static and dynamic analysis capabilities. SOLIDWORKS Simulation Professional enables you to optimize your design, determine product mechanical resistance, product durability, topology, natural frequencies, and test heat transfer and buckling instabilities. It can also perform sequential multi-physics simulations. SOLIDWORKS Simulation Premium lets you efficiently evaluate your designs for nonlinear and dynamic response, dynamic loading, and composite materials. SOLIDWORKS Simulation Premium includes three advanced studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics.

SPACE GASS is a multi-purpose 3D analysis and design program for structural engineers. Its extensive range of features make it suitable for anything from beams, trusses and frames to buildings, towers, tanks, cable structures and bridges. Capabilities include a 64-bit multi-core solver, silky smooth 3D rendered graphics, plate finite elements, frame elements, cable elements, tension/compression-only elements, moving loads and links to many CAD and building management programs. Why SPACE GASS Save time, money, and get a safe and efficient design. Silky smooth graphical interface that lets you see your changes visually as you go. A fast sparse matrix solver that fully utilizes the parallel processing power of multi-core computers. A wide range of structural modeling tools, analysis options and design modules. Comprehensive video tutorials to walk you through some of the tricky stuff. Configurable for stand-alone or floating network systems.

KloudGin is the only combined, one cloud field service and asset management solution on a single easy-to-use platform. Connecting customers, employees and assets with AI powered access to information on any device. All work in one – KloudGin is the only industry-focused system that eliminates silos and unifies Field Service Management (FSM) and Enterprise Asset Management (EAM) in a single cloud platform. KloudGin’s Artificial Intelligence constantly learns from your daily operations and user interactions to predict future needs and improve your productivity. You work smarter, enhance your processes and increase revenue. Win-Win-Win!

HAULSIM connects the fleet assets, mining operational plans and the people to build a ‘digital twin’ of any mining operation – open pit or underground – to deliver an accurate representation of any mine sites haulage operations. With a 3-D Discrete Event Simulation (DES) engine, at its core, HAULSIM is the only mining simulation software that can quantify the impact of changes as the models reflect the complex and dynamic nature of a mine site in its entirety; including the variability, interactions and dependencies that occur in these systems. Decisions to a mine haulage system can be based on real data giving the user the ability to test multiple ‘why’ and ‘what-if’ scenarios to reduce operating costs through optimised performance, and ensure overall operational safety and efficiency.

Vensim® is the software of choice for thousands of analysts, consultants, and researchers worldwide for building high-quality simulation models in business, scientific, environmental, and social systems. Vensim integrates into one environment a powerful suite of tools for developing, testing, interpreting, and distributing models. These tools include cause-and-effect diagramming, graphical and textual model construction, easy reproduction of model structure using subscripts (arrays), Monte Carlo sensitivity analysis, optimization, data handling, and application interfaces. Further features enable advanced model resolution and fidelity. Vensim includes patented techniques to aid error detection, error prevention, and rapid comprehension of complex results.

ScaleOut Digital Twin Streaming Service™ Easily build and deploy real-time digital twins for streaming analytics Connect to many data sources with Azure & AWS IoT hubs, Kafka, and more Maximize situational awareness with live, aggregate analytics. Introducing a breakthrough cloud service that simultaneously tracks telemetry from millions of data sources with “real-time” digital twins — enabling immediate, deep introspection with state-tracking and highly targeted, real-time feedback for thousands of devices. A powerful UI simplifies deployment and displays aggregate analytics in real time to maximize situational awareness. Ideal for a wide range of applications, including the Internet of Things (IoT), real-time intelligent monitoring, logistics, and financial services. Simplified pricing makes getting started fast and easy. Combined with the ScaleOut Digital Twin Builder software toolkit, the ScaleOut Digital Twin Streaming Service enables the next generation in stream processing.

If buildings had a ‘brain’, monitoring their systems and responding in real time, how much more secure, comfortable and efficient could they become? We are answering that question with Neuron, using artificial intelligence to make our buildings, districts and cities healthier, more sustainable places to live and work. Neuron is an app that integrates our insights into the built environment with emerging digital technologies into a single platform. It uses 5G and the Internet of Things to gather real-time ‘sense data’ from equipment and systems. It uses Building Information Modelling (BIM) to display these complex data sets through a cloud-based, centralized management console. Neuron’s ‘brain’ uses artificial intelligence and machine learning to analyze, optimize and automate operations. Digital twins are helping to connect the physical and digital worlds together. Our service, as consultants and technologists, is to develop a twin that connects disparate information sources.

ASTRA Pro has optional structural analysis and design applications for RCC framed multi storied buildings and RCC tunnel lining with steel ribs and RCC portal based on rock quality designation (RQD) and rock mass rating (RMR), RCC & PSC jetty design. ASTRA Pro gives the complete analysis and design details in step wise format and complete set of sample drawings in editable CAD format. In the demo version the default input data can not be changed and drawings are for viewing only. The Reports and drawings are complete as a set for each design modules. Detail estimation for BoQ, item rates & cost are also available for girder type bridges, box type bridges/culverts and composite bridges. ASTRA Pro is the software for Engineering Design of RCC 'T' Girder Bridges, Composite Bridges with Steel Plate/Box Girder and RCC Deck Slab with single and Multi-Span in Straight or Curve layout, PSC 'I' Girder Bridges, PSC Box Girder Bridges, Continuous PSC Box Girder Bridges, Steel Truss Bridges, etc.

Integrated solutions are essential in times of tight schedules and scarce resources. Therefore, RIBTEC offers various synergies in calculation, design and construction. You benefit from a time-saving data flow in the sense of Building Information Modeling (BIM) in the overall process of structural design. RIB's software solutions for structural engineers range from structural, building and ground engineering as well as finite element calculations to tunnel and bridge construction and the drawing of formwork and reinforcement plans. RIB has been developing pioneering solutions for structural design and FEM since 1961. The RIBTEC programs are successfully used by over 5,000 engineering offices, inspection engineers, construction companies and planning departments in the public and industrial sectors. With more than 100 structural analysis programs, RIBTEC comprehensively covers the practice of structural design.

Cosmo Tech provides a 360° Simulation Digital Twin platform to solve the most complex industrial problems and lead enterprise decision making. Industrial companies rely on Cosmo Tech to predict the evolution of their organization to better understand the impact of their decisions and optimize all levels of enterprise planning; ensuring a future that is robust, resilient and sustainable. Develop scenarios that involve disruptions in your system to plan for the future. By running simulations including the likes of machine breakdowns, workers’ strikes, and increased costs, you can anticipate how to recover quickly in these events. Uncover which range of parameters and processes to adjust in your digital twin to make complex decisions with confidence. View all the variables that go into decision making, as well as cascading effects from altering them, at a glance.

Design seamlessly from concept to virtual commissioning in the cloud. Bring your teams together and improve your designs with FactoryTalk® Twin Studio™ software. Now it is easier than ever to design, collaborate and refine your designs quickly by designing your systems in the cloud. FactoryTalk Twin Studio enables you to move quickly from software to software, accelerating the movement of the project through the design process. As your project grows, built-in change tracking and versioning automatically keep track of who did what and when so you can focus on your work, not on which file to be working on. Collaborate on projects from anywhere to improve designs and develop projects faster than ever before. Build, test and commission your machines virtually to confirm that they meet your needs before committing to a design. Remotely deploy updates and troubleshoot problems from anywhere using your web browser.

Developed for companies who build large and complex scale prototypes where the goal is to reduce the number or variations of prototypes produced. smartAR™ augments a digital twin over top a live camera feed of a real world, physical object, maintaining scale, placement and position of the CAD model relative to the object. A tablet is used to view the digital twin but the tablet’s position and orientation is monitored by an external motion tracking system. Tracking the tablet enables very high precision when overlaying a digital twin on a real world object. As the user moves around the physical object, virtual images on the tablet remain fixed relative to the object. Virtual data can be ‘snapped to position’ on the real world object with accuracy better than 3 millimeters in most stationary views. Mechdyne’s TGX software is used to access high resolution CAD data from a central workstation/servers to minimize latency on the tablet.

Optimize product designs and reduce time to market with FLOW-3D, a highly-accurate CFD software that specializes in solving transient, free-surface problems. FLOW-3D‘s complete multiphysics suite includes our state-of-the-art postprocessor, FlowSight. FLOW-3D provides a complete and versatile CFD simulation platform for engineers investigating the dynamic behavior of liquids and gas in a wide range of industrial applications and physical processes. FLOW-3D focuses on free surface and multi-phase applications, serving a broad range of industries including microfluidics, bio-medical devices, water civil infrastructure, aerospace, consumer products, additive manufacturing, inkjet printing, laser welding, automotive, offshore, energy and automotive. A uniquely powerful, multiphysics tool, FLOW-3D provides the functionality, ease-of-use and power that helps engineers advance their modeling objectives.

Simulate real-world designs, devices, and processes with multiphysics software from COMSOL. General-purpose simulation software based on advanced numerical methods. Fully coupled multiphysics and single-physics modeling capabilities. Complete modeling workflow, from geometry to postprocessing. User-friendly tools for building and deploying simulation apps. The COMSOL Multiphysics® software brings a user interface and experience that is always the same, regardless of engineering application and physics phenomena. Add-on modules provide specialized functionality for electromagnetics, structural mechanics, acoustics, fluid flow, heat transfer, and chemical engineering. Choose from a list of LiveLink™ products to interface directly with CAD and other third-party software. Deploy simulation applications with COMSOL Compiler™ and COMSOL Server™. Create physics-based models and simulation applications with this software platform.

Simcenter Femap is an advanced simulation application for creating, editing, and inspecting finite element models of complex products or systems. You can use advanced workflows in Simcenter Femap to model components, assemblies, or systems, to then determine a model’s behavioral response when subjected to real-world conditions. In addition, Simcenter Femap provides powerful data-driven and graphical results visualization and evaluation, which in combination with the industry-leading Simcenter Nastran, delivers a comprehensive CAE solution that improves product performance. In the quest to make products lighter yet stronger, manufacturers are increasing their use of composite materials. Simcenter is at the leading edge of composites analysis through continuous development of material models and element types. Simcenter speeds the entire process for simulating laminate composite materials through a seamless connection to composites design.

VPS-MICRO predicts the life of manufactured parts by simulating the behavior of the materials they’re made from. VPS-MICRO is built on three inescapable truths. Durability is not a function of applied stress, alone, but rather a combination of that stress and the material’s reaction to it. The materials we use to build complex components and systems are not homogenous. Computer cycles are shorter and cheaper than physical testing cycles or prototyping. Using these ideas as a foundation, VEXTEC’s VPS-MICRO® is a computational software that accurately accounts for a material’s reaction to the stress imparted upon it, its variability and all its various damage mechanisms, its geometry, and the conditions of its usage over time. The result is a 3D, time and condition-based product simulation that accurately and efficiently reflects the real world physics of how, when and why damage occurs.

BIM and digital twins, as well as the trends towards larger projects, more sophisticated geometric shapes, greater detail development and more and more dependencies, are substantially increasing the amount of computing power required. For this reason, Allplan Engineering Civil 2021 was developed with a focus on optimum performance. Thanks to new parametric reinforcement objects and the combination of many individual work steps, Allplan 2021-1 considerably speeds up the reinforcement design of walls, beams and columns. Users can specify reinforcement rules with regards to minimum and maximum spacing, minimum diameter or permissible reinforcement ratio, and define offsets, connection reinforcement and different bracing areas. Finally, views and sections can be conveniently generated and placed. In addition, the planning of punching shear reinforcement is facilitated. Working with these parametric reinforcement objects is particularly timesaving.

ProtaBIM has been designed to allow engineers to easily create, communicate and coordinate models with other project stakeholders including architects, fabricators, BIM specialists and owners. Using our revolutionary ProtaHUB technology we can easily create models from a range of both 2D and 3D information including 2D and 3D DXF, IFC and Revit. Using intelligent physical objects means ProtaStructure models can also be accurately and directly shared with other leading BIM platforms including Autodesk Revit without wasting time re-creating model data and fixing building setout. Save hours of modelling time by starting in either your chosen BIM platform or ProtaStructure and simply sharing your model back and forth, as many times as you wish. Make changes and enhancements along the way and seamlessly synchronize projects to keep your BIM models up to date.

We have developed a platform that makes buildings more transparent and sustainable, reduces energy consumption and CO2 emissions, and regulates them as needed with artificial intelligence. With the plug-and-play approach of the aedifion cloud platform and the digital twin of your building, we create the optimal data basis for diverse use cases. Conveniently accessible via web frontend or app. Enriched with external data, our platform identifies optimization potentials that can be realized immediately. With aedifion, you rely on engineering know-how and artificial intelligence to make your buildings greener, more transparent and more valuable, and fully integratable. Connectivity to all trades of the technical building equipment and high-performance data provision plug-and-play. Digital operational optimization through reporting and automated analysis with the help of artificial intelligence.

Digital transformation unlocks the potential of your assets and empowers you to adopt predictive maintenance (PdM) strategies. With the ability to look ahead, you can prevent costly failures, reduce downtime, and focus on shaping what’s next. Our comprehensive Asset Performance Management (APM) software portfolio is designed to overcome today’s industrial challenges by leveraging industrial big data, Cloud, artificial intelligence, digital twin, and augmented reality. With improved analysis, you’ll eliminate inefficiencies, optimize operations, and improve profitability. A unifying multi-dimensional information model to aggregate data from multiple sources and provide context for use with reporting/ dashboard tools. Improve plant performance in near real-time by enabling rich analytics in your BI tool on industrial data. Connect your people, processes, and technology to rapidly deploy a risk-based asset strategy tied to business objectives.

Imerso is the smartest construction monitoring platform in the industry to create true-to-life Digital Twins. Save costs, accelerate deliveries, cut travels, and improve facility management with unprecedented insight and indisputable as-built data. Alerts of field work deviations. Notes and comments appended to real objects. Measurements with millimetre accuracy. Online remote collaboration. A 3D Digital Copy of the building, representing the current status with millimeter precision. Capture all the different building stages - from start to finish. Remote teams can navigate the virtual job site collaboratively from their browser, just like being there, taking measurements or creating status reports. Problematic deviations from the plans are highlighted in minutes. No more costly surprises, delays, or partner disputes. Progress and performance of all trades at a single glance, with unprecedented insights into your teams, projects, and best practices.

witboost is a modular, scalable, fast, efficient data management system for your company to truly become data driven, reduce time-to-market, it expenditures and overheads. witboost comprises a series of modules. These are building blocks that can work as standalone solutions to address and solve a single need or problem, or they can be combined to create the perfect data management ecosystem for your company. Each module improves a specific data engineering function and they can be combined to create the perfect solution to answer your specific needs, guaranteeing a blazingly fact and smooth implementation, thus dramatically reducing time-to-market, time-to-value and consequently the TCO of your data engineering infrastructure. Smart Cities need digital twins to predict needs and avoid unforeseen problems, gathering data from thousands of sources and managing ever more complex telematics.

A new 4D Infrastructure for building the industrial metaverse. A platform where large industrial companies can measure, analyze, and build AI-based automation directly into the ground floor operations of their businesses. We build live digital twins of real-world operations, that capture ground-floor processes and transform them into a live data stream. Then, through the lens of our AI, we identify the critical variations that are causing inefficiency, lower production, or unsafe environments, in real time. Clients are then empowered to reimagine and automate their processes in ways that unlock massive unrealized value. Using context, sensors cross-validate, increase confidence in what is being sensed, and show what is really happening with people and processes. We begin by automatically combining the data from 3D files and 2D floor plans to map out a physical space, including the location and capabilities of all the existing sensors in the facility.

Ansys Mechanical is a best-in-class finite element solver with structural, thermal, acoustics, transient and nonlinear capabilities to improve your modeling. Ansys Mechanical enables you to solve complex structural engineering problems and make better, faster design decisions. With the finite element analysis (FEA) solvers available in the suite, you can customize and automate solutions for your structural mechanics problems and parameterize them to analyze multiple design scenarios. Ansys Mechanical is a dynamic tool that has a complete range of analysis tools. Ansys Mechanical offers a dynamic environment with a complete range of analysis tools, from preparing geometry for analysis to connecting additional physics for even greater fidelity. The intuitive and customizable user interface enables engineers of all levels to get answers fast and with confidence. Ansys Mechanical creates an integrated platform that uses finite element analysis (FEA) for structural analysis.

Applied early in the product development lifecycle, Inspire accelerates the creation, optimization, and study of innovative, structurally efficient parts and assemblies through collaboration. Inspire's award winning user experience for geometry creation and modification can be learned in just a few hours, and delivers dependable Altair solver power. Structural analysis with the speed and accuracy of Altair® SimSolid®, as independently validated by NAFEMS, provides the ability to analyze large assemblies and complex parts. Dynamic motion simulation, including loads extraction, using the reliable multi-body systems analysis of Altair® MotionSolve®. The industry standard for structural efficiency, topology optimization by Altair® OptiStruct®, for the generative design of practical, viable, and manufacturable geometry. Inspire enables both simulation analysts and designers to perform what-if studies faster, easier, and above all earlier, encouraging collaboration.

Simufact Welding is a modular product line, which offers comprehensive functionality for modeling the elastic-plastic behavior of materials and structural welding simulation. The software covers different welding processes. Simufact Welding is designed for modeling and simulation of a wide range of thermal joining processes by means of structural welding simulation including usual arc and beam welding processes as well as brazing. Additionally, Simufact Welding provides possibilities to model heat treatment processes, variations of cooling and unclamping setups as well as mechanical loading of welded structures. Identify critical distortions, i.e. with respect to assembly, bulging, imbalances, and clearances. Investigate and optimize clamping tools even before an investment in tools has been made. Identify optimal welding directions and welding sequences.

ClearCalcs is a cloud structural engineering software that enables engineers and designers to streamline their repetitive calculations with easy-to-use calculators for beams, columns, foundations, and more. With calculators available for the US standards, Eurocode, Australian standards, New Zealand standards, and Canadian standards, ClearCalcs is a one-stop shop for improving your productivity and design capability. Calculations can be linked together with one click, saving on time and errors, copy-pasting loads, and reports print to a simple, one-page PDF for easy checking.

Advancing AI to eliminate trial and error in medicine. Our digital twins enable confident and quick clinical trials. We work in neuroscience, immunology, metabolic disease, and more. TwinRCTs reach full enrollment sooner because they require fewer patients to achieve the same power as traditional trial designs. Shorten time to enrollment in late-stage studies. TwinRCTs improve the ability to observe treatment effects in early-stage studies by increasing power without adding more patients. Make confident decisions from early-stage studies and attract study participants. TwinRCTs give participants a greater chance of receiving the experimental treatment because they use smaller control groups. Position clinical trials with digital twins for regulatory success. Unlearn is engineering the future of medicine with artificial intelligence. We invent and deploy new types of generative models trained on extensive patient-level data from previous studies.

SCIA Engineer is an integrated, multi-material structural analysis software and design tool for all kinds of structures. Its wide range of functionality makes it the ideal partner for the design of office buildings, industrial plants, bridges or any other project, all within the same easy-to-use environment. Powerful CAD-like modeling, advanced types of calculation, code-compliant multi-material design and customizable reports. Typical situations can be automated with built-in or user-defined parametric templates for various geometries and powerful load generation tools. SCIA Engineer provides the most comprehensive implementation of Eurocodes, including National Annexes, U.S. codes and other international standards. Seamless exchange of models with other project stakeholders, through the powerful bi-directional links with Allplan, Revit and Tekla Structures, Open BIM's IFC or third-party plug-ins.

APM is a tool-enabled transition to reliability-centered maintenance and risk-based inspections. This technical review focuses on asset performance management technologies for Industry 4.0 as applied directly to the Power Generation industry. As we move from digitalization strategy to digital transformation, we use the Digital Twin to gain prediction insights and to enhance day-to-day processes for better business outcomes. See the technology behind the story, to visualize and contextualize data exactly when and where needed for effective operational, maintenance and engineering decisions. Digital Twins play a vital role towards bridging the gap between CapEx and Opex to lower total cost of ownership and deliver optimal return on asset.

Our proprietary software creates a 3D digital replica of onshore and offshore process plants and consolidates various data sources which, when combined, provides a highly accurate, multi-layered digital twin. From inspection into remedial to taking major projects from feed through to detail design, our digital twin technology has many features that nearly eliminate the need for in-person site visits, breaking the traditional cycle of continuous onsite mobilizations. AS-TEG™ provides a contextualized digital twin platform that gives operators and contractors the ability to quickly search and locate as-built, designed, and integrity data right from the desktop – from anywhere in the world.

WillowTwin™ is a powerful software platform developed from deep knowledge in the real estate and infrastructure industries. It enables users to make proactive, data-led decisions in real-time to reduce expenses, grow profits, and better manage risk. Digital twins provide an intuitive way to store, organize, and access data generated by real estate and infrastructure networks. Through WillowTwin™, data once buried in proprietary systems become accessible and intelligible to owners and users of the built world, creating significant value for asset owners, managers, and occupiers. All spatial, static, and live systems data is reported through a centralized and secure platform. Data is safeguarded in an enterprise-grade repository and cloud-hosted solution, backed by Microsoft Azure. Applicable to any asset type, WillowTwin™ is built with industry-specific features and requirements to serve any project.

One Concern has built a Digital Twin of the world around us, revealing hidden risks across the built and natural environments posed by natural disasters, extreme weather, and climate change. Our Digital Twin enables customers to uncover direct structural risks to their buildings, as well as risks posed to the external networks they depend on. The Digital Twin underpins our proprietary risk models, unlocking the resilience quotient – allowing us to probabilistically project business downtime in the face of unprecedented hazard events. One Concern helps customers to understand their property’s direct structural risk from climate, natural disasters, and extreme weather – as well as the networks the property depends on to remain operational. We identify downtime across multiple hazards and return periods, including the impact of climate change under the scenario of 1.5 degrees celsius temperature increase.

Advance Design is a mature and easy to use FEM Structural Analysis solution dedicated to structural engineers operating in a BIM environment. It fully designs any type of structure, with any kind of loads, mixing concrete, timber and steel members. It includes major code standards (Eurocodes / North American). Advance Design provides an outstanding BIM experience. It enables intelligent model-based workflows for Engineers and construction professionals. Advance Design acts as a BIM platform and guarantees the continuity of geometric and analytical data through model transfers all along the design cycle. Analysis results are also stored in the Digital Model and are part of the BIM process. For instance, they can be used to start a rebar design or a steel connection process directly from Revit. These options open new disruptive opportunities. Powerful, Easy to use and operate, fully compliant with Revit®. Supported by a strong team of experts. Flexible licensing model.

The city of the future will require sophisticated data visualization and controls to analyze data streams, operate, monitor, and control systems, and protect the environment, the city infrastructure, the investments, and mostly the citizens of the city. Creating a digital twin and allowing city managers and department executives to see and respond in real-time will be key to creating the enhanced experience cities are seeking. City planners, department heads, and governments can reduce infrastructure costs and service requirements through this advanced smart city data visualization and control platform. With the ability to monitor all systems and system interactions and create predefined alerts, the platform enables city infrastructure (i.e. street lights, cameras, transportation, road conditions, and much more) to be proactively managed and controlled leveraging the interaction between systems with minimal staffing using these advanced Digital Twin software tools.

Our powerful all-in-one 3D data platform lets you turn a space into an accurate and immersive digital twin. Create experiences like nothing you’ve ever seen before. Digitize and view your space from multiple angles, build functionality on top of it, get accurate measurements, and more. With a single scan, you can automatically create 3D walk-throughs, 4K print quality photos, schematic floor plans, OBJ files, point clouds, videos, and other media.* Zoom out and see a 3D digital twin of your property from the outside and rotate it along any axis to see it from any perspective. You’ll be able to get the big picture of your space. Embed annotations and media in your digital twin to highlight key features of your property. Generate schematic floor plans of your property with the push of a button. Measure any aspect of your space, such as walls, windows, furniture, and more.

Supply chains are facing a new era of uncertainty. To ensure that your products get to the people who need them, Luminate™ Planning leverages a powerful digital twin foundation to intelligently predict potential problems and opportunities, offer machine learning-based recommendations for action, and pivot production, inventory, and labor plans to minimize risk and deliver with confidence. Luminate Planning bridges time and organizational silos, closing the gaps between demand and supply planning, and the upstream and downstream supply chain. Luminate Experience is workflow-driven which lets users easily create situation rooms, collaborate, gain end-to-end visibility and orchestration. Luminate Planning provides end-to-end visibility and orchestration, supporting the digital twin, improving sustainability and minimizing risk. Cognitive planning skills provide more accurate forecasts, stock out predictions, segmentation, and exception prioritization.

IBSS is an end-to-end full stack data digital twin for smart buildings. ‘Plug and play’ a range of existing and emerging technologies into the IBSS Digital Twin. Through open APIs, pre-built integrations, and interoperable-only protocols, we empower you to choose best in class sensors, systems, and apps that suit your goals and ways of working. Avoid vendor lock-in and make the choice yours. Whether you’re a developer, owner, operator or occupier, IBSS unifies all spatial, static and live system data into a centralised and secure data digital twin. The IBSS twin has apps, workflows, analytics and visualisations tailored to help you do your best work.   Create healthier, more inclusive and more environmentally friendly buildings. Whether it’s carbon reporting, energy efficiency, water quality, water usage or waste management – the IBSS platform can help you meet your ESG goals. Every building is different, but IBSS allows you to deploy modular systems at scale and speed

Transform your infrastructure design productivity with our end-to-end solution enabling the production of fast, accurate and fully-integrated design models. Causeway’s Infrastructure Design solution is used extensively by civil and structural engineers, incorporating modules for volumetric, alignment design, drainage design and vehicle path analysis, as well as functionality for creating road markings and designing traffic signs. Offering intelligent 3D modelling capabilities and powerful integration functionality, the solution delivers all of the benefits of Building Information Modelling (BIM) to the civil engineer. Causeway PDS delivers powerful 3D design tools to aid the design engineer in producing the best designs possible. Offering dedicated auto-design and auto-updating features, the solution is designed specifically to save engineers' time, to reduce risk, and to ensure value is engineered into every design.