CAESIM vs. ExecSims Comparison Chart

Orbital Stack is an AI and CFD web-based software that provides earlier qualitative guidance, comparing a large number of design options while highlighting any potential wind and thermal comfort red flags. It allows for the realization of a variety of climate-conscious, high-performance developments not previously feasible due to cost and/or time constraints associated with traditional studies. Orbital Stack is the first digital climate-analysis tool built by global leaders in wind and microclimate engineering using real wind tunnel data. It is truly a game-changer for the architecture and building design sector, offering our clients direct access to wind comfort and safety analysis, thermal comfort and shadowing analysis, and cladding pressure simulations. This means architects can run their own wind simulations and quickly understand the climate impacts of their proposed building designs from the start, making decisions that result in higher performing and more resilient projects.

SPEC Innovations’ flagship model-based systems engineering solution can help your team reduce time-to-market, cost, and risk on even some of the most complex systems. This cloud or on-premise application uses a modern web browser, with an intuitive graphical user interface. Innoslate’s full lifecycle capabilities include: • Requirements Management • Documents Management • Modeling • Discrete Event Simulator • Monte Carlo Simulator • DoDAF Models and Views • Database Management • Test Management with full reports, status updates, results, and more. • Real Time Collaboration

ReliaSoft software provides a powerful range of reliability software solutions to facilitate a comprehensive set of reliability engineering modeling and analysis techniques. We are the leading reliability solution provider for product test, design, maintenance strategy and optimization. Our products support a wide range of reliability and maintainability analysis techniques, such as life data analysis, accelerated life testing, system modelling and RAM analysis, reliability growth, FRACAS, FMEA and RCM analysis to meet and improve reliability of your products, processes and optimize maintenance planning.

OrCAD® X is a unified PCB design software platform that offers significant improvements in ease of use, performance, automation, data management, and collaboration. Our cloud-enabled product suite contains applications for schematic, simulation, and PCB layout. OrCAD X Capture is one of the most widely used schematic design solutions for the creation and documentation of electrical circuits. PSpice® is our virtual SPICE simulation environment integrated within Capture that allows you to prototype your designs using the industry-leading, native analog, mixed-signal, and advanced analysis engines to deliver a complete circuit simulation and verification solution. Our two PCB layout environments, OrCAD X PCB Editor and OrCAD X Presto, allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is a new user-friendly option offering a simpler interface for quick-turn PCB design.

Epicor Connected Process Control (CPC), formerly eFlex Systems, provides manufacturers a flexible, no-code/low-code MES solution. No programming or special skills required. Digital work instructions, with multi-media capabilities, along with the ability to integrate virtually any device with communication capabilities, provides 100% historical record of the product and the process. Providing data insight, from production reports, to part history, quality summary and more — address issues quickly, minimize waste and disruptions. Whether you start small in subassembly areas, an entire line, or apply enterprise wide - we work with manufacturers of all sizes and needs. Hosted on prem or in the cloud, you decide what's best for your operations.

From UX to platform to edge devices, we take care of everything, so you can keep things moving efficiently! The CalAmp Telematics Cloud is a dependable secure platform that is a solid foundation for your telematics needs. We provide telematics capabilities and best practices that adapt to your processes and integrate into your systems. Whether using one of our purpose-built applications or leveraging the underlying power of the CalAmp Telematics Platform, we provide flexibility to fit into your organization’s needs. From applications to platforms to edge devices, CalAmp’s solutions are built so you can trust them to always support your business. Fully redundant with built-in autoscaling capabilities you can ”dial-up” the level of availability that meets your business’ needs. Your telematics information is critical to your systems and how you do business. CalAmp’s enterprise-grade solutions are used worldwide and can scale to meet your needs, both today and tomorrow.

NetBrain, founded in 2004, provides a powerful no-code automation platform for hybrid network observability, allowing organizations to enhance their operational efficiency through automated workflows. The platform applies automation across three key workflows: troubleshooting, change management, and assessment. Get network-wide and contextualized analysis across your multi-vendor, multi-cloud network Visualize and document the entire hybrid network using dynamic network maps and end-to-end paths Automate network discovery and ensure data accuracy for a single source of truth Auto-discover and decode your network's golden configurations, discover day 1 issues, and automate configuration drift prevention Automate pre- and post-validations for network changes with application performance context understanding Automate collaborative troubleshooting from human to machine For every network troubleshooting idea, create a map, apply automation from your own library

The Asset Guardian (TAG) is a powerful, all-in-one EAM solution designed to optimize asset management across industries. Integrated with Microsoft Dynamics 365, TAG enables businesses to efficiently manage assets, track maintenance, and drive cost savings. • Full integration with Microsoft Dynamics 365 or your ERP system • Mobile-optimized EAM for real-time asset tracking • Predictive maintenance to reduce downtime • Comprehensive master data synchronization • Digital forms integration for streamlined data collection The Asset Guardian (TAG) is a prime example, offering CMMS tools for maintenance scheduling and spare parts management, alongside APM features to monitor asset health and predict failures. TAG provides real-time insights to boost performance and minimize downtime, while centralizing data for better operational control.

𝗔𝗜-𝗽𝗼𝘄𝗲𝗿𝗲𝗱 𝗮𝗻𝗱 𝗽𝗮𝘁𝗲𝗻𝘁𝗲𝗱, 𝗕𝗤𝗥’𝘀 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗲𝗻𝗵𝗮𝗻𝗰𝗲 𝗽𝗿𝗼𝗱𝘂𝗰𝘁 𝗿𝗲𝗹𝗶𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝗮𝗻𝗱 𝗿𝗲𝗱𝘂𝗰𝗲 𝗰𝗼𝘀𝘁𝘀. 𝗘𝘅𝗽𝗹𝗼𝗿𝗲 𝗼𝘂𝗿 𝘀𝘂𝗶𝘁𝗲 𝗼𝗳 𝟱 𝗮𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗲𝗱 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗮𝗹𝘆𝘀𝗶𝘀 𝗮𝗻𝗱 𝗼𝗽𝘁𝗶𝗺𝗶𝘇𝗮𝘁𝗶𝗼𝗻 𝘁𝗼𝗼𝗹𝘀: 𝗦𝘆𝗻𝘁𝗵𝗲𝗹𝘆𝘇𝗲𝗿𝗧𝗠: streamlines PCB design with de-rating & MTBF prediction. 𝗖𝗶𝗿𝗰𝘂𝗶𝘁𝗛𝗮𝘄𝗸𝗧𝗠: verifies multi-PCB systems for errors & overstress. 𝗳𝗶𝗫𝘁𝗿𝗲𝘀𝘀®: predicts component lifespan with de-rating, thermal & stress analysis. 𝗖𝗔𝗥𝗘®: assesses reliability, availability, maintainability & safety. 𝗮𝗽𝗺𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗲𝗿®: optimizes maintenance & logistics.

Interfacing’s Digital Twin Organization software provides transparency and Governance to improve Quality, Efficiency, and ensure Regulatory Compliance. Map, analyze, and automate processes, manage regulatory compliance, assess risks within a single platform! Interfacing’s digital twin solution (Enterprise Process Center - EPC) is an enterprise management system that helps companies digitalize processes to streamline operations, increase productivity, and continuously improve. Interfacing’s digital business platform – Rapid Application Development (RAD) Tools, with its Low-Code Development methodology will optimize usage of your technical resources and maximize transparency for ongoing improvement. Discover how our Low-Code Rapid Application Development module provides all the tools to create and deploy Custom, Scalable, Secure, and Mobile ready Applications in Days vs. Months!