| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| Snapmaker_Orca_Windows_V2.3.5_portable.zip | 2026-07-15 | 145.3 MB | |
| Snapmaker_Orca_Windows_Installer_V2.3.5.exe | 2026-07-14 | 108.0 MB | |
| Snapmaker_Orca_Mac_universal_V2.3.5.zip | 2026-07-14 | 204.4 MB | |
| Snapmaker_Orca_Linux_ubuntu_2404_V2.3.5.zip | 2026-07-14 | 123.5 MB | |
| Snapmaker_Orca-Linux-flatpak_V2.3.5_aarch64.flatpak.zip | 2026-07-14 | 103.4 MB | |
| Snapmaker_Orca-Linux-flatpak_V2.3.5_x86_64.flatpak.zip | 2026-07-14 | 107.5 MB | |
| Snapmaker_Orca_Mac_universal_V2.3.5.dmg | 2026-07-14 | 227.7 MB | |
| README.md | 2026-07-13 | 5.7 kB | |
| Snapmaker Orca V2.3.5 Release source code.tar.gz | 2026-07-13 | 145.3 MB | |
| Snapmaker Orca V2.3.5 Release source code.zip | 2026-07-13 | 153.7 MB | |
| Totals: 10 Items | 1.3 GB | 0 | |
新增项
-
新增顶盖控制功能。
-
新增耗材同步功能,支持通过颜色匹配或直接覆盖将机器耗材信息同步至 Orca。
-
新增官方耗材色库面板, 支持双色官方耗材。
-
新增可变层高与混色细分层高同时启用时的警告提示。
-
混色模式下,使用不兼容耗材混色方案时,禁止切片并提示错误。
-
新增 Snapmaker PVA,并优化 Snapmaker PLA-CF 和 Snapmaker TPU 的参数配置。
优化项
-
优化擦除塔结构,预留外墙缺口。
-
Snapmaker Orca 启动动画更新。
修复项
- 修复项目包含多种不同类型耗材时,保存项目后在 Orca 中减少耗材数量,再次打开项目后耗材类型显示错误的问题。
- 修复将匹配模式的最低混色比例调整为 30% 后,“混色推荐”列表仍显示 25% 方案的问题。
-
修复开启“全域生效”后,同时使用单色和混色涂色且两者层高一致时,单色切片也会细分层高的问题。
-
修复擦拭塔用料预估计算错误的问题。
- 修复擦拭塔 Brim 路径与模型 Brim 路径发生干涉的问题。
- 修复热更新后,Web 资源和工艺资源无法正常使用的问题。
- 调整支撑独立层高参数的显示逻辑。无需关闭擦拭塔即可显示,且默认不勾选。
- 修复部分 PC 上启动 Snapmaker Orca 后出现卡顿的问题。
New Features
-
Added Top Cover controls.
-
Added a filament sync feature. You can sync filament information from the printer to Orca using "Match Mapping" or "Direct Override".
-
Added an official filament color library panel with support for dual-color official filaments.
-
Added a warning when Variable Layer Height and Subdivide Mix Layer are enabled simultaneously.
-
In Color Mixing mode, if an incompatible filament combination is used, slicing is blocked and an error is displayed.
-
Added support for Snapmaker PVA and optimized the print profiles for Snapmaker PLA-CF and Snapmaker TPU.
Improvements
-
Optimized the wipe tower structure by adding an opening in the outer wall.
-
Optimized the Snapmaker Orca startup animation.
Bug Fixes
- Fixed an issue where filament types were displayed incorrectly after reopening a saved project. This issue occurred when the project contained multiple filament types and the number of filaments was reduced in Orca after the project was saved.
- Fixed an issue where 25% mixing recommendations were still displayed after the minimum mixing ratio for Match mode was set to 30%.
- Fixed an issue where layer height subdivision was incorrectly applied to single-color regions. This occurred when Full Domain was enabled and both single-color and color mixing painting used the same layer height.
- Fixed an issue that caused incorrect filament usage estimates for the wipe tower.
- Fixed an issue where the wipe tower brim overlapped with the model brim.
- Fixed an issue where web resources and process resources could not be used properly after a hot update.
- The Independent Support Layer Height option is now available without disabling the wipe tower. It is unchecked by default.
- Fixed an issue where Snapmaker Orca could become unresponsive after startup on some PCs.