Home
Name Modified Size Downloads / Week Status
Totals: 6 Items   4.0 kB 1
DOWNLOAD THIS 2013-12-13 11 weekly downloads
serialLCD_python_RaspberryPi 2013-12-13 11 weekly downloads
Bootloader 2013-12-12 11 weekly downloads
serialLCD_Arduino_Library 2013-12-12 11 weekly downloads
Firmware 2013-12-12 22 weekly downloads
README.txt 2013-12-13 4.0 kB 11 weekly downloads
Project : Serial LCD module(ATmega8 at 8Mhz internal osc. (no-xtal bootloader)). Author : Pranjal Joshi Date : 7-12-2013 License : GNU GPL v2 (Relased in public domain as open-source). This is open-source hardware & software. Feel free to edit/improve/share/use it. ------------------------------------------------------------------------ atmega8_noxtal: This is a bootloader for ATmega8 to run @ 8Mhz internal osc. (This bootloader is not written by me.) copy this folder into arduino/hardware/arduino/bootloader restart arduino IDE. For 1st time: 1. burn arduinoISP sketch (given in File->Example->ArduinoISP) into your arduino. 2. connect atmega8 to arduino through SPI. google it if you are burning bootloader for 1st time. 3. Now in arduino IDE->tools->Board & select atmega8-noxtal. 4. Now burn bootloader, Tools->Burn bootloader. If your connections are ok then bootloader will be loaded without any error. 5. opne Firmware-8/168/328.ino file in arduino IDE, select board as atmega8-noxal. 6. Goto file->Upload using programmer (I assumed that your arduino contains arduinoISP sketch..) 7. Congrats..! Firmware file is loaded into your ATmega8. (Tf you wish to use atmega168/328, you must choose proper bootloader & Board before uploading. Sketch is compatible with all these microcontrollers.) ---- No Need to burn Firmware & bootloader every time. It requires only for 1st time ---- ---------------------------------------------------------------------------------------- Firmware File: The Firmware file contains a sketch for slave/UART to LCD Controller ATmega8/168/328. Hardware Overview: Serial port at 9600 baudrate. The following pin mapping is for arduino duemilanove/uno/standlone AVR chips. (Please see pin mapping given image.) Arduino Mega/Due are NOT SUPPORTED this sketch. ---------------------------------------------------------- arduino pins LCD pins ---------------------------------------------------------- 9(PWM) 15(LED brightness control) 10 D7 11 D6 12 D5 13 D4 A3 RS A2 R/W A1 E ---------------------------------------------------------- ---------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------- ---*** FOR ARDUINO ***--- serialLCD folder: The serialLCD folder is arduino library. Copy this folder in arduino/libraries & restart arduino IDE to use this library. **************************************************************************************** NOTE: Please dont include SoftwareSerial.h file in sketch as this library internally include the file but you can use SoftwareSerial as usual if you want. **************************************************************************************** (The pin 6,7 on arduino are used by this library.) Arduino 6(tx) ---> LCD Rx Arduino 7(rx) ---> NO USE (can be left floating/un-connected) ----------------------------------------------------------------------------------------- --- *** FOR RASPBERRY PI ***--- Raspberry Pi Python Module for serialLCD using ATmega8 (arduino compatible) Type: Module/python File Author: Pranjal Joshi Date: 13-12-2013 License:GNU GPL v2 (Relased in public domain as open-source). ----------------------------- NOTE ----------------------------------- 1. Please make sure that serialLCD.py file is in the same folder/directory where you are creating your python source file. 2. serialLCD.pyc file will be generated automatically. 3. Possible Reasons of error are: a. You didn't installed requied python libraries. b. the serialLCD.py file is not in same directory of source file. 4. This project is still under development. So to report any bug please contact me at joshi.pranjal5@gmail.com ----------------------------------------------------------------------
Source: README.txt, updated 2013-12-13

Thanks for helping keep SourceForge clean.

Screenshot instructions:
Windows
Mac
Red Hat Linux   Ubuntu

Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)

More information about our ad policies
X

Briefly describe the problem (required):

Upload screenshot of ad (required):
Select a file, or drag & drop file here.

Please provide the ad click URL, if possible:

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

No, thanks