Name | Modified | Size | Downloads / Week |
---|---|---|---|
Respin_MX23.3-Pi3-4_Fluxbox.img.7z | 2024-06-01 | 1.4 GB | |
README.md | 2024-06-01 | 4.4 kB | |
Totals: 2 Items | 1.4 GB | 0 |
In English
Senpai Respin of MX-23.3_Fluxbox for RaspberryPi 3 and above
I have created a personal respin of the official version of MX-Linux with Xfce for raspberryPi4, Pi400 and Pi5 , but only with Fluxbox, so it can run on the RaspberryPi3 with only 1GB of ram. The same image I have also tested it with my Raspi4 8GB and it works perfectly, I don't have a raspi 5 or other options like Orange Pi, but if the official version works on them it is very possible that this one does too, basically the only difference is the absence of Xfce..., if you try it please comment it in the MX forum.
The official version comes with Chromium and a minimum of programs, I have only added PaleMoon as a lightweight Firefox derivative, the minimalist Dillo browser, a basic image viewer like Nomacs, a lightweight music player like Rhythmbox, a multiple clipboard manager like Parcellite, the Lxde Task Manager and a multi-pane file manager like SpaceFM.
To lower the RAM consumption from MX Service Manager I have disabled the services that I don't use, which have to do with "printers and samba", but you can re-enable them without problems... I have also enabled the use of "zram" adding to the file "rc.local" the command "zram start" with "sudo nano /etc/rc.local", if you do not need it just edit the file again and delete or comment with a #, that command, for use with the Pi4 of more than 2GB I think it is not necessary and it would be better to disable it.
This would not be possible without the magnificent MX-Linux distribution, the selfless help of its developers and users of the MX-Linux forum.
Link to the Respin article in the MX forum
Link to the Blog article where I explain how I did it.
Disclaimer: Please note that this project is in no way connected to the original distribution, it is not an official release, it is just my personal experiment, use it at your own risk.
Senpai Respin de MX-23.3_Fluxbox para RaspberryPi 3 y superior
He creado un respin personal de la versión oficial de MX-Linux con Xfce para raspberryPi4, Pi400 y Pi5 , pero solo con Fluxbox, para que pueda funcionar en la RaspberryPi3 con solo 1GB de ram. La misma imagen también la he probado con mi Raspi4 de 8 GB y funciona perfectamente, no tengo una raspi 5 u otras opciones como Orange Pi, pero si la versión oficial funciona en ellas es muy posible que esta también lo haga, básicamente la única diferencia es la ausencia de Xfce..., si la prueban por favor comentarlo en el foro de MX.
La versión oficial viene con Chromium y un mínimo de programas, yo solo he añadido PaleMoon como derivado ligero de Firefox, el navegador minimalista Dillo, un visor de imágenes básico como Nomacs, un reproductor de música ligero como Rhythmbox, un administrador de portapapeles múltiple como Parcellite, el Gestor de tareas de Lxde y un administrador de archivos de múltiples paneles como SpaceFM.
Para bajar el consumo de RAM desde MX Service Manager he desactivado los servicios que yo no uso, que tienen que ver con "impresoras y samba", pero se pueden volver a activar sin problemas... Además he activado el uso de "zram" añadiendo al archivo "rc.local" el comando "zram start" con "sudo nano /etc/rc.local", si no lo necesitáis solo hay que editar de nuevo el archivo y borrar o comentar con una #, ese comando, para usar con la Pi4 de mas de 2GB creo que no es necesario y sería mejor deshabilitarlo.
Esto no sería posible sin la magnífica distribución de MX-Linux, la ayuda desinteresada de sus desarrolladores y usuarios del foro de MX-Linux.
Enlace al artículo del Respin en el foro de MX.
Enlace al artículo del Blog donde explico como lo hice.
Descargo de responsabilidad: Tenga en cuenta que este proyecto no está de ninguna manera conectado con la distribución original, no es una versión oficial, es sólo mi experimento personal, úselo bajo su propia responsabilidad.