Home / Client GUI / data
Name Modified Size InfoDownloads / Week
Parent folder
WPress.PNG 2013-05-10 195 Bytes
0
WUn.PNG 2013-05-10 185 Bytes
0
WOver.PNG 2013-05-10 185 Bytes
0
UPUn.PNG 2013-05-10 206 Bytes
0
UPPress.PNG 2013-05-10 211 Bytes
0
UPOver.PNG 2013-05-10 204 Bytes
0
Turret4.PNG 2013-05-10 450 Bytes
0
Turret3.PNG 2013-05-10 470 Bytes
0
Turret1.PNG 2013-05-10 485 Bytes
0
Turret2.PNG 2013-05-10 473 Bytes
0
Turret.PNG 2013-05-10 519 Bytes
0
Thumbs.db 2013-05-10 53.8 kB
0
SUn.PNG 2013-05-10 174 Bytes
0
SPress.PNG 2013-05-10 176 Bytes
0
SOver.PNG 2013-05-10 174 Bytes
0
RIGHTUn.PNG 2013-05-10 208 Bytes
0
RIGHTPress.PNG 2013-05-10 206 Bytes
0
LEFTUn.PNG 2013-05-10 216 Bytes
0
RIGHTOver.PNG 2013-05-10 208 Bytes
0
LEFTPress.PNG 2013-05-10 216 Bytes
0
LEFTOver.PNG 2013-05-10 214 Bytes
0
DUn.PNG 2013-05-10 195 Bytes
0
DPress.PNG 2013-05-10 189 Bytes
0
DOWNUn.PNG 2013-05-10 210 Bytes
0
DOWNPress.PNG 2013-05-10 220 Bytes
0
DOver.PNG 2013-05-10 195 Bytes
0
DOWNOver.PNG 2013-05-10 208 Bytes
0
AUn.PNG 2013-05-10 174 Bytes
0
APress.PNG 2013-05-10 175 Bytes
0
AOver.PNG 2013-05-10 174 Bytes
0
Totals: 30 Items   60.9 kB 0 
Code created by Nick Williams 9/14/2012

The is completely open for anyone's use as they see fit. No warranty
shall be implied through the use of this code.

****Setup****

Use the Processing IDE to open the GUIClient. Don't drag and drop the
sketch into the Processing IDE or you will get a compile error. Open
through the GUI.The error is from trying to load the images in the
'data' folder.

ServerSketch is for the Arduino side. Upload this to your Arduino.

****Edit 3/6/13****

If you are using Processing 2.0 or above, use GUIClient2.0
If you are using Processing 1.5.1, use the normal GUICLient
Source: README.txt, updated 2013-05-10