Looking for the latest version? Download netdb-1.13.2.tar.gz (4.0 MB)
Name Modified Size Downloads / Week Status
vmware 2014-11-04 1919 weekly downloads
netdbtracking 2014-10-22 6363 weekly downloads
README 2014-03-05 10.3 kB 33 weekly downloads
Totals: 3 Items   10.3 kB 85
What's new in v1.12.3: - Added description searches to CLI and CGI. Add desc_search to levelx_reports to enable functionality in CGI. - Added Shut/No Shut, functionality to CGI and vlanchange.pl. Make sure user has vlan_change rights and shut/no shut functionality should show up. This is cisco only for now but there are plans to expand to other platforms in v1.13. See netdb.conf sample file for shut_script reference. What's new in v1.12: - Vastly improved Aruba wireless client tracking including client speed and AP details. - Added update_interval to netdb.conf to keep track of how long mac addresses are connected to ports. Make sure this is equal to how often you update your switch data in minutes (defaults to 15min). - Added authgroups to handle multiple groups of credentials for different groups of devices. See new netdb.conf. - Added lastup field to switchstatus to track the last time a port was connected rather than relying on cross correlating mac address data. See upgrade about running update_lastup.pl to fixup your database timestamps. - VRF and router display support. Updated CSV output for VRF and router, may break your custom scripts built against CSV output - Added support for tracking individual mac/vlan associations on trunk ports for vmware or edge trunk ports. Vlan will show up as xxx(t) to denote that the port is a trunk port and the specific mac is on a certain vlan on the port instead of simply showing trunk. - Keeps track of mac/vlan association in historical switchport data rather than showing the current vlan configured on a port (if supported by scraper). Shows discrepency with (*) between a configured vlan on a port and the last vlan a mac was seen on on that port. - Voice vlans now show up next to phones with a (*) to show that the device is not on the default vlan on the port (if supported by scraper). - Added use_port option to force importing of port data no matter what on a port. - Added p_minutes and p_uptime for to track how long a port has been connected. - Added hung process control, install libproc-processtable-perl or Proc::ProcessTable What's new in v1.11.x: - Added arubaswitchscraper.pl support from Dustin Heywood - Added gethost option to grab hostnames directly from devices and use IP addresses in devicelist.csv file. This is not preferred and will adversely impact performance, but it's an option now. - The old ciscoscraper.pl has been deprecated and there are now standalone scrapers for IOS, NX-OS and ASAs. See the UPGRADE documents. - CDP/LLDP/FDP data is now collected from devices and available as CSV output or in the CGI page. This is still experimental, please report any bugs or issues. - Included sendjob script to send changes to devices, backup configs and save configurations to NVRAM. Experimental support. - v1.11.1 contains the new subversion repository URL: svn://svn.code.sf.net/p/netdbtracking/code/branches/netdb-1.11 - See the UPGRADE What's new in v1.10.4: - Created standalone IOS and ASA scrapers. ciscoscraper.pl still works for IOS, ASA and NXOS, but will be discontinued in v1.11 in favor of standalone scripts. - Fixed SSH enable bug in NetDBHelper.pm What's new in v1.10.3: - Included SVN repository, from now on you can do svn update to update to the latest version - Updated Cisco WLC Scraper for newer code versions - Fixed JunOS Scraper bugs - Improved scraping performance with hostprompt matching What's new in v1.10.2: - See the UPGRADE document before installing - Added dedicated NX-OS scraper, devtype nxos. Improved NX-OS support for descriptions. Old scraper still supports NX-OS but support will be dropped in v1.11 in favor of the nxosscraper. - Ability to configure use_trunks from the devicelist.csv file - Improved secondary credential support and login error messages - Added use_fqdn knob in netdb.conf to use the FQDN for switch names instead of just hostnames (changing this on an existing database will destroy historical data on switches because the names will all change) What's new in v1.10: - See the UPGRADE document before installing - v1.10.1: Improved debugging and error handling in new scrapers - Experimental VM "appliance" in vmware folder on Sourceforge - Refactored netdbscraper to support modular plug-in scripts for multiple devices - Added scrapers for JunOS, Foundry, Aruba and Cisco WLC - Added Wifi AP/Client tracking support (beta) - Added a devtype option to netdb.conf to change the default device type (hard coded to cisco for old config files) - Changed the default Cisco mac address command to "show mac address-table". Still catches errors and uses alternate "show mac-address-table" on select devices that can't handle the other format - Improved telnet support for large address tables (SSH is still recommended) - Switched to keywords arp,nomac,ipv6 from netdbarp,netdbnomac,netdbv6 in the devicelist.csv file, but old device files are not affected. - Added wildcards to vlan_change authorization for multiple switch definitions. - Improved SSH secondary credentials fallback support What's new in v1.9.2: - See the UPGRADE document, database update required if upgrading from earlier major version (v1.8.x or earlier) - Fixed various scaper issues with Nexus line - Fixed SSH Nexus 7000 interface description bugs What's new in v1.9.1: - See the UPGRADE document, database update required if upgrading from earlier major version (v1.8.x or earlier) - Added ability to skip ports manually on switches from device file and from netdb.conf What's new in v1.9.0: - See the UPGRADE document, database update required. - Requires libio-socket-inet6-perl, use Debian/Ubuntu package: apt-get install libio-socket-inet6-perl - Added Unused Ports Report Type - Added wildcard searches to switch and unused port reports: - eg. building*, city*, datacenter* or *c6500* - Added wildcard searches on mac addresses, xx:xx:xx* and *xx:xx - Note that it only works in colon formatted addresses for now - IPv6 Support is functionally complete - Gathers the IPv6 neighbor table from most cisco devices - Perl's Net::DNS handles reverse IPv6 lookups - No support for IPv6 VRFs yet - IPv6 addresses are stored as fixed length 32 character strings in the ip field in the database - IPv6 addresses have no formatting in the DB unlike IPv4 addresses - Uses Net::IP to display all IPv6 addresses to the short format and handles input from any valid IPv6 format - Other bug fixes, improved sorting and device support. What's new in v1.8.2: - See the UPGRADE document, especially if upgrading from v1.7.x or below - Fixed a major performance issue with device scraping running in a single-threaded mode. A netdb.conf change caused this, but no change should be required on your part. This mostly affects netdb v1.8 users. - Improved SSH error detection and secondary login credentials support - Added ssh_timeout to netdb.conf and lowered default timeout from 5 seconds to 3 seconds What's new in v1.8.1: - See the UPGRADE document, especially if upgrading from v1.7.x or below - Expanded database deletion methods (see netdbctl) - Added filter for deletion based on IP SQL match (eg. 10.10.%) - Created deletion statistics report - Improved documentation and upgrade instructions - Added Nexus 5000 v4.2+ mac-table support and improved FEX support - Numerous bug fixes What's new in v1.8 - Major release, please see the UPGRADE document, database update required - Support for changing VLANs from the web interface with access controls - Support for a custom VLAN change script, a generic one is provided - Support for long descriptions - Allow searching by the last 4 digits of a mac address, search using the xx:xx format to use this - Added speed and duplex to switch reports - Modified switch report CSV output for speed and duplex, if you have any scripts tied to this, you will need to update them to match the new fields - Added the ability to override max_macs on any switch for large VMWare installs. - Added support for -vv output to netdbctl as an alternative to the debug settings What's new in v1.7.6: - Fixed CSV Export bug from web interface - Improved ASA/FWSM support What's new in v1.7.5: - Fixed Nexus 5000 vPC bug - Added support for FWSM Vlan mapping from interface names (ASA support is SSH only) What's new in v1.7.4: - Numerous scraper improvements and login enhancements - Fixed 6500 access layer mac-table issues on DFC blades - Fixed 4500 port-channel access layer mac-table bug - Improved netdbscraper debugging output - Improved ASA/FWSM support What's new in v1.7.3: - Fixed Nexus 7000 ARP Table issues - Added support for ASA ARP tables - Added devicefile.csv options forcetelnet and forcessh to override global settings - More netdbscraper fixes and error detection What's New in v1.7.1: - Fixed Nexus 7000 mac address issues - Minor netdbscraper fixes - Added devicefile.csv options forcetelnet and forcessh to override global settings - Added netdb.conf option use_trunks = DEFAULT What's New in v1.7: - Combined scraper scripts in to one script, netdbscraper.pl to increase performance - Added support for private vlans and port security MAC addresses to the scraper script - Added support for older Catalyst 2900XL/3500XL series switches - Added the proc_delay option to netdb.conf to allow even faster process launching - More than doubled the updatenetdb.pl import speed - Updated CGI code and fixed different browser bugs - Removed netcat requirements for SSH - Juniper support is still a work in progress... What's New in v1.6: - Added SSH support to scraper scripts with optional telnet fallback support - Added backup and restore operations to netdbctl - Added delete methods to updatenetdb.pl - Added optional NAC registration data to the database (must use Bradford NAC or a custom data source) - Added mac_format display options to both config files to change the default MAC display format and allow CLI and CGI override options - Added quoted CSV file format option to the CLI - Added support for 6500s running VSS code and NX-OS support for Nexus devices
Source: README, updated 2014-03-05

Thanks for helping keep SourceForge clean.

Screenshot instructions:
Red Hat Linux   Ubuntu

Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)

More information about our ad policies

Briefly describe the problem (required):

Upload screenshot of ad (required):
Select a file, or drag & drop file here.

Please provide the ad click URL, if possible:

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

JavaScript is required for this form.

No, thanks