Looking for the latest version? Download mochad-0.1.16.tar.gz (129.7 kB)
Name Modified Size Downloads / Week Status
openwrt 2013-05-23 0
chumby 2012-03-10 0
chumbyzm 2011-05-25 0
zoneminder 2011-03-17 0
README 2016-06-10 7.9 kB 66 weekly downloads
mochad-0.1.17.tar.gz 2016-06-10 138.4 kB 4545 weekly downloads
mochad-0.1.16.tar.gz 2013-05-23 129.7 kB 8080 weekly downloads
mochad-0.1.15.tar.gz 2012-03-10 129.5 kB 0
mochad-0.1.14.tar.gz 2012-01-15 128.9 kB 0
mochad-0.1.13.tar.gz 2011-12-29 128.5 kB 11 weekly downloads
mochad-0.1.12.tar.gz 2011-07-04 128.2 kB 0
mochad-0.1.11.tar.gz 2011-05-23 127.3 kB 0
mochad-0.1.10.tar.gz 2011-05-22 127.0 kB 0
mochad-0.1.9.tar.gz 2011-05-22 126.7 kB 0
mochad-0.1.8.tar.gz 2011-05-08 126.0 kB 0
mochad-0.1.7.tar.gz 2011-03-28 122.6 kB 0
mochad-0.1.6.tar.gz 2011-03-10 122.0 kB 0
mochad-0.1.5.tar.gz 2011-03-02 120.8 kB 0
mochad-0.1.4.tar.gz 2011-02-27 120.7 kB 0
mochad-0.1.3.tar.gz 2010-12-22 120.2 kB 0
mochad-0.1.2.tar.gz 2010-12-16 118.4 kB 0
mochad-0.1.1.tar.gz 2010-12-10 42.9 kB 0
Totals: 22 Items   2.1 MB 132
mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller. mochad stands for Multiple Online Controllers for Home Automation Daemon. 0.1.17 Fix for newer versions of autotools. Fix for distros using systemd-udev. 0.1.16 Fix "Could not find endpoints" problem. 0.1.15 Add support for 2011 CM19A. 0.1.14 Fix OpenRemote too many open sockets problem. Add shutters/blinds command. 0.1.13 Fix -d debug option. Add support for DS12A. 0.1.12 Add --raw-data option. 0.1.11 Fix xdim (extended dim) that only worked for unit code 3. 0.1.10 Fix major client problem. Commands from clients stopped working. 0.1.9 Add support for OpenRemote 2.0 with iPhone and Android clients. 0.1.8 Add support for Chumby application. == Build it mochad compiles and runs on Ubuntu 10.04 and 10.10. The libusb-1.0 development files are required. To install, sudo apt-get install libusb-1.0-0-dev If you are building on a Beagleboard/Beaglebone (http://beagleboard.org) using the native compiler, do the following to install libusb-1.0. opkg install libusb-1.0-dev The usual pattern for building the code applies. tar xzf mochad-...tar.gz cd mochad-... ./configure make sudo make install Please see http://sourceforge.net/apps/mediawiki/mochad/index.php?title=Main_Page for details on building for OpenWrt. == Run it Plugging a CM15A or CM19A should launch mochad. There no need to run mochad by hand or run it from /etc/rc.local. mochad is launched by a udev rule that matches the CM15A and CM19A USB vendor and product ID codes. == Use it Connect to mochad using netcat. For example, nc localhost 1099 You can connect to mochad from another host by specifying the IP of the host running mochad. netcat is available for Windows at <http://joncraton.org/blog/netcat-for-windows>. Everything sent by mochad appears on netcat standard output. In the simplest use case, mochad/netcat can be used to see X10 PL and RF activity. For example, run mochad on one host with a CM15A then connect to it using netcat from a netbook. Walk around with various X10 RF remote controls and the netbook to see which remotes work from various locations. Sample output: 12/07 20:49:10 Rx RF HouseUnit: C3 Func: Off 12/07 20:49:10 Tx PL HouseUnit: C3 12/07 20:49:10 Tx PL House: C Func: Off 12/07 20:49:10 Rx RF HouseUnit: C3 Func: Off 12/07 20:49:10 Tx PL HouseUnit: C3 12/07 20:49:10 Tx PL House: C Func: Off 12/07 20:49:17 Rx RFSEC Addr: 0x11 Func: Lights_Off_SH624 12/07 20:49:17 Rx RFSEC Addr: 0x11 Func: Lights_Off_SH624 12/07 20:49:37 Rx RFSEC Addr: C6:1B:00 Func: Motion_alert_MS10A 12/07 20:49:37 Rx RFSEC Addr: C6:1B:00 Func: Motion_alert_MS10A 12/07 20:49:37 Rx RFSEC Addr: C6:1B:00 Func: Motion_alert_MS10A 12/07 20:49:37 Rx RFSEC Addr: C6:1B:00 Func: Motion_alert_MS10A Everything sent to netcat standard input is sent to mochad. The following is a brief list of mochad commands. pl a1 [on|off] pl a1 [dim|bright] 0..31 pl a1 xdim 0..255 pl a1 pl a2 pl a [on|off|dim|bright|xdim|all_lights_on|all_lights_off|all_units_off] rf a1 [on|off|dim|bright] st -- show device status including RF security devices By default, received RF X10 commands are repeated on the PL interface for all house codes. This can be changed using the rftopl command (RF to PL repeater). rftopl * -- enable all house codes (default) rftopl abc -- enable for house codes A, B, and C. Disable for all others. rftopl 0 -- disable for all house codes. This is useful if more than one CM15A is in use. Leaving both enabled will result in PL collisions and redundant commands. Please see http://sourceforge.net/apps/mediawiki/mochad/index.php?title=Main_Page for more details on command and event messages. If you want to debug X10 RF, or gateway raw frames to another program, you can use the --raw-data argument. See apps/mochad.scr for an example on how to gateway frames with misterhouse. Another use is to simply be able to get all the raw RF frames to see if the multiple copies received are identical (good), off by a few bits (RF marginal), or nonsensical (bad). 07/01 23:34:42 Rx RF HouseUnit: A1 Func: Off 07/01 23:34:42 Raw data received: 5D 20 60 9F 20 DF 07/01 23:34:42 Raw data received: 5D 20 60 9F 20 DF 07/01 23:34:43 Raw data received: 5D 20 60 9F 20 DF 07/01 23:34:43 Raw data received: 5D 20 60 9F 20 DF 07/01 23:34:43 Raw data received: 5D 20 60 9F 20 DF For examples of controlling shutters and blinds, see the following. https://sourceforge.net/apps/mediawiki/mochad/index.php?title=Shutter_and_Blinds == Multiple controllers The Perl program mochamon.pl shows how to monitor more than one instance of mochad. It is possible to create a master home automation master which talks to more than one X10 controller. For example, a mocha master could receive RF commands from controller A then send PL commands on controller B in a detached building. == Command line X10 control Command line control is useful for controlling devices from cron or CGI programs. $ echo "pl a all_lights_off" | nc localhost 1099 More generally, create a file name x10cmd with the following echo "$@" | nc localhost 1099 Make the file executable. $ chmod +x x10cmd Run x10cmd with command line parameters to control X10 devices. $ ./x10cmd pl a all_lights_off == Web Interface The cgi/ sub-directory holds a simple Perl CGI web application that uses mochad. The interface is designed for small hand held devices over slow connections (not broadband) so the web pages are very basic and small. No GIFs or JPGs are used. To accomodate older devices with limited web browsers, CSS, Javascript, or AJAX are not used. The web applications has buttons at the top to send commands to mochad. The remainder shows status information for three hosts running mochad. Please see http://sourceforge.net/apps/mediawiki/mochad/index.php?title=Main_Page for more details. == Hardware X10 controllers: CM15A and CM19A Various X10 devices that have been tested with mochad: AM486, LM465 softstart, PAM02, RR501 (2 way), DS10A, MS10A, KR10A, SH624, KR19A NOTE: CM15A macros and timers are NOT supported. For best results, use AHP (ActiveHome Pro) to clear interface memory and disable the internal RF to PL repeater. This ensures the CM15A behaves like a transceiver. == Files *.c *.h -- C source files mochamon.pl -- Perl program showing how to connect to three instance of mochad and dumping out the output to standard out. cgi/ -- Sample Perl CGI utilizing more than one mochad == Acknowledgments The Perl CGI scripts uses the venerable cgi-lib.pl copyright Steven E. Brenner. cgi-lib is simpler and smaller than CGI.pm which is appropriate for small embedded systems such as WiFi routers. For OpenWrt based systems, using LuCi would make more sense than Perl since LuCi is already present in the system. However, the Perl CGI scripts work fine with lighttpd on OpenWrt. This project in not in any way affliated with X10 Corp. (www.x10.com). Do not contact them about this driver since they know nothing about it. == References The following documents were useful in development of this program. X10 Power Line Protocol <http://software.x10.com/pub/manuals/xtc798.doc> <http://software.x10.com/pub/manuals/xtc798.pdf> <http://software.x10.com/pub/manuals/xtdcode.pdf> X10 RF including RF Security Protocol <http://www.edcheung.com/automa/rf.txt> X10 CM11A Protocol <http://software.x10.com/pub/manuals/cm11a_protocol.txt> Linux Daemon HowTo <http://www-theorie.physik.unizh.ch/~dpotter/howto/daemonize>
Source: README, updated 2016-06-10

Thanks for helping keep SourceForge clean.

Screenshot instructions:
Red Hat Linux   Ubuntu

Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)

More information about our ad policies

Briefly describe the problem (required):

Upload screenshot of ad (required):
Select a file, or drag & drop file here.

Please provide the ad click URL, if possible:

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

No, thanks