User Ratings

4.8 out of 5 stars
★★★★★
★★★★
★★★
★★
★
26
1
0
0
1
ease 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
features 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
design 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
support 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 4 / 5
Rate This Project
Login To Rate This Project

User Reviews

Filter Reviews:
All
  • lhc3538 Posted 2017-01-18
    what's the code "if( ... )" in intput_file.c?
  • davyrobertson Posted 2016-07-25
    Installed on UDOO Quad board with IR webcam - worked first time no issues - perfect project
  • mtreichel Posted 2016-07-10
    Good, easy to configure, reliable. Warning: the connection credentials are written to /var/log/message.* in clear text!
  • oeeo Posted 2015-07-23
    Easy to install - work great for me on my raspberryPi. I make a bashscript mjpg.sh for starting: #!/bin/bash LD_LIBRARY_PATH=/opt/mjpg-streamer/mjpg-streamer-experimental/ /opt/mjpg-streame r/mjpg-streamer-experimental/mjpg_streamer -i "input_raspicam.so -fps 15 -q 50 - x 1280 -y 960" -o "output_http.so -p 9000 -w /opt/mjpg-streamer/mjpg-streamer-ex perimental/www" &
  • miguelvera-31 Posted 2015-07-15
    Raspberry-Pi GOOD
  • krustyvader Posted 2015-02-14
    It's simple, it's easy to use and it works great.
  • cation234 Posted 2014-12-15
    Works like a charm on a Raspberry Pi paired with Logitech C170. Thank you very much.
  • tristanlinux Posted 2014-08-24
    Top! Works create. Low CPU and RAM usage. Thanks for all!
  • theswak Posted 2014-03-03
    Has many excellent uses and untapped potential with multiple media synchronization.
    1 user found this review helpful.
  • savedcoder Posted 2013-07-12
    Very handy program. Low CPU and RAM usage, excellent performance even on slow hardware. It uses V4L v1, so it takes some tinkering to compile, triggers warnings and one plugin won't compile. But on the whole, it's definitely worth the work.
  • danieljohnson2 Posted 2013-06-26
    Nice work ! Great project.
    1 user found this review helpful.
  • scottsimpson2 Posted 2013-06-19
    Thanks for Mjpg-streamer, it's good!
    1 user found this review helpful.
  • tfileme Posted 2013-05-12
    Very useful. Thanks.
    1 user found this review helpful.
  • elmot73 Posted 2012-09-23
    Works well on SOHo routers and RaspberryPi
    1 user found this review helpful.
  • alsauser Posted 2012-08-05
    you have done a great job, thanks!
  • danger1989 Posted 2012-07-23
    Very nice, thanks!
  • oid-3866067 Posted 2012-06-01
    It is ok when it applied in Ubuntu. Everything goes fine. However, after compiled with CC=arm-linux-gcc and command executed on embedded Linux ( on ARM11 development board), screen shows that '...input_uvc.so cannot be open...'. This message also happens even if complete path is input, e.g. './mjpg_streamer -i "/...(complete_path).../input_uvc.so --help" '. Some other things I also tried but all failed: - manual change LD_LIBRARY_PATH to the plugins folder - copy all "xxxx.so" files into /usr/lib and /lib - make sure the dependancies "libjpeg.so" existed in the LD_LIBRARY_PATH folder - try any of xxx.so from mjpg_streamer with the complete path but all failed I have tried the 'cosine' example which is a C program using dlopen function ( it is from ->man dlopen ) and it works fine, which proves that dlopen( ) work ok in my ARM11 board.
  • oid-3644379 Posted 2012-01-16
    Great thing for embedded ARM with a little CPU load!
  • dongxuli Posted 2011-12-03
    Great software to share webcam with very light CPU load. vlc can do streaming, but with high CPU load. Keep on the great work!
  • yodaj Posted 2011-06-29
    good job
  • koseelg Posted 2011-03-26
    works excellent, on 64bit too
  • yurim2011 Posted 2011-02-10
    gr8 project
  • oid-3232268 Posted 2011-02-08
    MJPG-streamer by tom_stoeveken
  • manoweb Posted 2010-09-17
    Exceptional, wonderful.
  • reuterr Posted 2010-09-16
    Works well on a Seagate FreeAgent DockStar with Debian Squeeze. See: http://www.rudiswiki.de/wiki/DockStarWebCamStream Thank you Tom.
  • Previous
  • You're on page 1
  • 2
  • Next