Intel Ethernet Drivers and Utilities Icon

User Ratings

★★★★★
★★★★
★★★
★★
23
0
1
0
2
ease 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 3 / 5
features 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 3 / 5
design 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 3 / 5
support 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5 3 / 5
Write a Review

User Reviews

  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    This driver is cancer on Debian/Ubuntu/Mint/Whatever. They are hard coding kernel versions that they happen to use, rather than compile depending on whatever kernel build source it's being built on(the point of building from src in the first place). So this driver compile shts itself if every planet isn't aligned with one guy using redhat in a dungeon at intel. This is not the way to sell hardware, kids. Just in case you missed the point of vendor supplied drivers. For example: #define UBUNTU_VERSION_CODE (((LINUX_VERSION_CODE & ~0xFF) << 8) + (UTS_UBUNTU_RELEASE_ABI)) #if UTS_UBUNTU_RELEASE_ABI > 255 #error UTS_UBUNTU_RELEASE_ABI is too large... #endif /* UTS_UBUNTU_RELEASE_ABI > 255 */ #if ( LINUX_VERSION_CODE <= KERNEL_VERSION(3,0,0) ) /* Our version code scheme does not make sense for non 3.x or newer kernels, * and we have no support in kcompat for this scenario. Thus, treat this as a * non-Ubuntu kernel. Possibly might be better to error here. */ #define UTS_UBUNTU_RELEASE_ABI 0 #define UBUNTU_VERSION_CODE 0 #endif

    Posted 05/05/2016
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Works just as well as you hoped it would. If, at your own risk, you want to support both 1Gb and 10Gb with SFP+ modules that have not been tested with both--and are not advertised to work with both--just make multispeed_fiber always true: --------------------- ixgbe/ixgbe-4.0.3/src/ixgbe_phy.c ---------------------- index 102dd53..a3e5f74 100644 @@ -1451,7 +1451,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the SFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && @@ -1771,7 +1771,7 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the QSFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&

    Posted 04/29/2015
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    I cannot comment on the driver as I could not get it work on Ubuntu. I thought i'd give it a go, even though I knew it wasn't apart of the supported list. Ubuntu 14.04, 3.13.0-24-generic kernel, Intel Corporation Ethernet Connection I217-V (rev 05). **UPDATE** Booting without the cable plugged in helped!

    Posted 05/03/2014
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    For older non-current CentOS boot kernel (such as 1 or 2 sub-revisions behind), you're forced to install the full-source CentOS linux kernel into /usr/src/linux. Cannot rely on 'kernel-devel' package then. Certainly, not Intel's fault. but it works very well.

    Posted 02/02/2014
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Great stuff.

    Posted 05/31/2013
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Easy for use.

    Posted 05/10/2013
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Easy to run e1000

    Posted 02/12/2013
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Works and fast.

    Posted 01/18/2013
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    small and efficient and gets the job done.

    Posted 12/15/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    great app, works nicely

    Posted 11/10/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Great project! Thanks for amazing work!

    Posted 10/22/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Very helpful, fast and easy product!

    Posted 10/22/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    This is a wonderful project. TNX!

    Posted 10/21/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Love this app

    Posted 10/21/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Very difficult to install

    Posted 10/21/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Nice and easy to use.

    Posted 10/11/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Awesome product, thanks for sharing!

    Posted 10/06/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    A good product of hard work. Thank you so much for sharing.

    Posted 09/13/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Thanks for sharing this software. It helped me a lot. Keep it up!

    Posted 08/29/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Fantastic software. Thanks a lot for sharing! Highly recommended.

    Posted 08/28/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    great project, thank you for supporting it!

    Posted 08/01/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Wonderful project. Excellent works !

    Posted 06/03/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Excellent project and great support. The Intel NIC group is doing a great job with this drivers.

    Posted 06/02/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Good project, many thanks for conveying

    Posted 06/02/2012
  • 1 of 5 2 of 5 3 of 5 4 of 5 5 of 5

    Awesome project, thanks a lot for giving out

    Posted 03/05/2012
Show next review

Thanks for helping keep SourceForge clean.

Screenshot instructions:
Windows
Mac
Red Hat Linux   Ubuntu

Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)

More information about our ad policies
X

Briefly describe the problem (required):

Upload screenshot of ad (required):
Select a file, or drag & drop file here.

Please provide the ad click URL, if possible:

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

No, thanks