| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| CrashRecomp-v1.04.zip | 2026-10-24 | 155.7 MB | |
| SHA256SUMS.txt | 2026-10-24 | 89 Bytes | |
| CrashRecomp v1.04_ almost 3x faster, native rendering path source code.tar.gz | 2026-10-24 | 2.9 MB | |
| CrashRecomp v1.04_ almost 3x faster, native rendering path source code.zip | 2026-10-24 | 3.1 MB | |
| README.md | 2026-10-24 | 8.6 kB | |
| Totals: 5 Items | 161.7 MB | 0 | |
What's new in v1.04
Almost 3x faster: the native rendering path
The game used to be emulated at the Xbox 360 GPU level all the way down. v1.04 replaces the parts that were holding the frame rate back with native code, and it is the first step of moving the whole renderer to native Direct3D-to-Vulkan calls.
| Heaviest scene (L1_E1 village, 1080p, unlimited FPS) | v1.03 | v1.04 |
|---|---|---|
| Average frame rate | ~180 fps | ~500 fps (2.8x) |
| Worst 1% of frames (1% low) | ~105 fps | ~265 fps |
| 99th percentile frame time | 6.6 ms | 2.7 ms |
| CPU used by the vblank thread | ~70% of a core | ~5% |
Measured on a Ryzen 7 5700X + RTX 5080. The gain is on the CPU side (the GPU was never the limit, and DLSS or a lower resolution never changed the frame rate), so slower CPUs should gain in a similar proportion. We haven't measured that yet: reports with your CPU and the F1 overlay's numbers are welcome.
What changed under the hood:
- The scene is drawn in one pass. On the Xbox 360 the 10 MB of EDRAM can't hold a 720p frame with MSAA, so the game draws the scene three times, once per screen tile, and its Direct3D holds all the commands back until the end of the frame. Our renderer draws into full-size images, so v1.04 draws the scene once and the commands reach the renderer while the game is still building the frame. This alone was 2.4x, and it also removed the old fix for the line in the ice at the tile seam (there are no seams any more).
- The game's Direct3D command building runs as native code (the part that copied the render state into command packets and handed them to the GPU), checked byte for byte against the original.
- No more 500 fps cap: the emulated vblank ran at 1000 Hz and the game waits for two per frame. It is 2000 Hz now, and the thread that drives it sleeps on a precise timer instead of spinning on a CPU core.
- Shaders are compiled at install and warmed up in the background, so changing the resolution or the upscaler no longer stutters the first time.
- Fewer Vulkan render passes per frame.
The road to "100% native" (replacing the rest of the Xbox 360 GPU emulation with direct Direct3D-to-Vulkan calls, piece by piece) is documented in docs/internals/native-gpu-plan.md (github.com), with tasks for anyone who wants to help.
Simpler launcher
- The launcher opens on one page with the main options: language, resolution, FPS limit, HD AI Remaster and a single LIGHTING: ORIGINAL / REMASTER choice (REMASTER turns on SSAO, indirect light, contact shadows and soft shadows). ADVANCED (bottom right, Y on a controller, Y or F2 on the keyboard) shows every tab.
- The launcher and the in-game SETTINGS screen now share the same options, names and help texts.
- Removed rows that did nothing useful: SHADOW RESOLUTION (the game's shadows are stencil shadows) and HD TEXTURE PACKS (mod texture packs load by themselves; the HD AI Remaster's pack follows its own option).
- Keyboard and controller navigation in the launcher is more reliable.
Requirements
Windows 10/11 x64, a GPU with Vulkan 1.3 and an up-to-date driver (for example NVIDIA GTX 900 or newer, AMD RX 400 or newer, Intel Iris Xe / Arc), your Xbox 360 game files, and about 1.5 GB of free space.
Known issues
- Windows SmartScreen may warn about
CrashSetup.exebecause it isn't code-signed. Choose "More info" then "Run anyway". - Unzip to a short path (for example
C:\Games\CrashRecomp). Very deep folders can hit Windows' 260-character path limit while building. - Linux / Steam Deck via Proton isn't verified yet.
Install: download CrashRecomp-v1.04.zip, unzip it and run CrashSetup.exe (see the README). Coming from an
older version, install v1.04 the same way in a new folder. To keep your saves and settings, copy the old
dist\userdata folder into the new dist\. The optional subtitles and HD AI Remaster downloads are
unchanged and stay on the v1.0 release. The
installer fetches them from there.
Novidades da v1.04
Quase 3x mais rápido: o caminho de renderização nativo
O jogo era emulado no nível da GPU do Xbox 360 do começo ao fim. A v1.04 troca por código nativo as partes que seguravam o FPS, e é o primeiro passo para levar todo o renderizador para chamadas diretas do Direct3D para o Vulkan.
| Cena mais pesada (vila do L1_E1, 1080p, FPS livre) | v1.03 | v1.04 |
|---|---|---|
| FPS médio | ~180 fps | ~500 fps (2,8x) |
| Pior 1% dos quadros (1% low) | ~105 fps | ~265 fps |
| Tempo de quadro no percentil 99 | 6,6 ms | 2,7 ms |
| CPU usada pela thread de vblank | ~70% de um núcleo | ~5% |
Medido num Ryzen 7 5700X + RTX 5080. O ganho é do lado da CPU (a placa de vídeo nunca foi o limite, e DLSS ou uma resolução menor nunca mudavam o FPS), então CPUs mais lentas devem ganhar numa proporção parecida. Isso ainda não foi medido: relatos com a sua CPU e os números do overlay (F1) são bem-vindos.
O que mudou por dentro:
- A cena é desenhada numa passada só. No Xbox 360 os 10 MB de EDRAM não cabem um quadro 720p com MSAA, então o jogo desenha a cena três vezes, uma por faixa da tela, e o Direct3D dele segura todos os comandos até o fim do quadro. O nosso renderizador desenha em imagens do tamanho inteiro, então a v1.04 desenha a cena uma vez só e os comandos chegam ao renderizador enquanto o jogo ainda monta o quadro. Só isso deu 2,4x, e também aposentou a correção antiga da linha no gelo na emenda das faixas (não há mais emendas).
- A montagem de comandos Direct3D do jogo roda como código nativo (a parte que copiava o estado de renderização para os pacotes de comando e os entregava à GPU), conferida byte a byte com a original.
- Sem o teto de 500 fps: o vblank emulado rodava a 1000 Hz e o jogo espera dois por quadro. Agora é 2000 Hz, e a thread que o gera dorme num timer preciso em vez de girar num núcleo da CPU.
- Os shaders são compilados na instalação e aquecidos em segundo plano, então trocar a resolução ou o upscaler não trava mais na primeira vez.
- Menos passes de renderização do Vulkan por quadro.
O caminho até o "100% nativo" (trocar o resto da emulação da GPU do Xbox 360 por chamadas diretas do Direct3D para o Vulkan, peça por peça) está em docs/internals/native-gpu-plan.md (github.com), com tarefas para quem quiser ajudar.
Launcher mais simples
- O launcher abre numa página só com as opções principais: idioma, resolução, limite de FPS, HD AI Remaster e uma escolha única de ILUMINAÇÃO: ORIGINAL / REMASTER (REMASTER liga SSAO, luz indireta, sombras de contato e sombras suaves). AVANÇADO (canto inferior direito, Y no controle, Y ou F2 no teclado) mostra todas as abas.
- O launcher e a tela SETTINGS do jogo agora usam as mesmas opções, nomes e textos de ajuda.
- Saíram linhas que não faziam nada útil: RESOLUÇÃO DAS SOMBRAS (as sombras do jogo são de stencil) e PACOTES DE TEXTURAS HD (os pacotes de texturas dos mods carregam sozinhos; o do HD AI Remaster segue a própria opção).
- A navegação do launcher pelo teclado e pelo controle ficou mais confiável.
Requisitos
Windows 10/11 x64, uma placa de vídeo com Vulkan 1.3 e driver atualizado (por exemplo NVIDIA GTX 900 ou mais nova, AMD RX 400 ou mais nova, Intel Iris Xe / Arc), os arquivos do seu jogo do Xbox 360 e cerca de 1,5 GB livres.
Problemas conhecidos
- O Windows SmartScreen pode avisar sobre o
CrashSetup.exeporque ele não é assinado. Escolha "Mais informações" e depois "Executar assim mesmo". - Descompacte num caminho curto (por exemplo
C:\Jogos\CrashRecomp). Pastas muito fundas podem bater no limite de 260 caracteres do Windows durante a compilação. - Linux / Steam Deck pelo Proton ainda não foi verificado.
Instalação: baixe o CrashRecomp-v1.04.zip, descompacte e abra o CrashSetup.exe (veja o README). Vindo de
uma versão anterior, instale a v1.04 do mesmo jeito numa pasta nova. Para manter seus saves e opções, copie a
pasta dist\userdata antiga para a nova dist\. Os downloads opcionais de legendas e do HD AI Remaster não
mudaram e continuam na release v1.0. O
instalador os baixa de lá.