Download Latest Version
CS Release v2014-04-25 - dip switch fix.zip (35.2 kB)
Get an email when there's a new version of ColorSynth
| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| ColorSynth V1.0 BOM.txt | 2011-01-03 | 1.4 kB | |
| ColorSynth PCB-Schem v1.0 Readme.txt | 2011-01-03 | 1.4 kB | |
| ColorSynth schematic v1.0 for 16f88 EAGLE.sch | 2011-01-03 | 130.4 kB | |
| ColorSynth PCB v 1.0 for 16f88 EAGLE.brd | 2011-01-03 | 33.6 kB | |
| Totals: 4 Items | 166.8 kB | 0 | |
ColorSynth Schematic and PCB v1.0 README Written 01/03/2011 by Eric Bateman eric@colorsynth.com The ColorSynth v1.0 schematic and PCB were designed for use with the PIC 16F88 running firmware v2009-08-01. You can download this firmware at Sourceforge.net. This PCB was originally designed to have multiple uses, including MIDI controllers and other devices. To accomplish this I left a large section of the PCB as a generic breadboard. Please refer to the schematic when building this circuit, and feel free to email eric@colorsynth.com if you have any questions. The connectors on the PCB are: JP1 - Power Pin1 - Ground Pin2 - n/c Pin3 - 12V DC+ Pin4 - incoming power from MIDI on JP2, connect to other side of the power switch to allow selection between wall/midi power. JP2 - MIDI IN Pin1 - Ground from incoming MIDI power Pin2 - DC+ from incoming MIDI power Pin3 - MIDI pin 4 Pin4 - MIDI pin 5 JP3 - MIDI OUT Pin1 - Ground for MIDI power transmission Pin2 - 12V DC+ for MIDI power transmission Pin3 - MIDI pin 4 Pin4 - MIDI pin 5 JP4 - LED connector (common anode) Pin1 - 8V DC+ from LM7808 vreg1 Pin2 - Red Cathode Pin3 - Green Cathode Pin4 - Blue Cathode JP5 - Knob/Switch header (unimplemented for V1.0 PCB and V2009-08-01 firmware) Please see http://www.midi.org/techspecs/electrispec.php for info on the MIDI electrical specification.