CLIMAT (Hypnocube Clone) Files

Ceci est le programme du cube4x4x4 par tank and chabze
Ce programme est en libre disposition et peut être utilisé et modifié
LIBRE POUR TOUTE UTILISATION NON COMMERCIALE SEULEMENT
FREE FOR NON-COMMERCIAL USE ONLY
Si vous le modifiez en ajoutant des effets par exemple faites en profiter la communauté en allant sur le forum
http://nk36.geekaddict.net/c13-hypnocube

Ce cube est un clone de l'hypnocube, cependant pas la peine de le recompiler et de le mettre dans l'original cela ne fonctionnera pas (pour des raisons de câblages ... a moins de modifier le programme)!

Le programme de management du cube pour PC est maintenant fournis dans l'archive : Attention cependant ce programme est en version Beta. N'hésitez pas a me remonter des bugs.
Ce programme permet:
- De commander le cube via la liaison RS232 du port d'extension
- D'activer les différents modes du cube
- D'afficher l'état du cube
- De lister/Activer/désactiver les différents effets du cube
- De créer des effets et de les sauvegarder
- D'envoyer les effets vers le cube (Expérimental)
- De commander le mode couleur d'ambiance
- et bien d'autres fonctionnalités a venir


==============================================================================
==============================================================================


Version 0.5 (May 2012):
--------------------------------
- Adding MPLAB-X project directory (Generation is working But I prefer using old MPLAB 8)
- Display core Optimisation (Little more Speedy)
- Streaming function is now working (With ClimatControlSoftWare V0.2)
- Sending User Effect is now working. All 4 slots are OK (With ClimatControlSoftWare V0.2)
- Adding Flash programming service as separate files (not yet optimised)
- Minor Comment adding

Version 0.4 (May 2012):
--------------------------------
(Dev Version)
- Small code cleaning and Optimisation
- Preparing software for Streaming purpose (not fully working yet)

Version 0.3 (May 2011):
--------------------------------
- Global cleaning
- Adding effect upload/download with CLIMAT control software


Version 0.12 (December 2011):
--------------------------------
- Modifying some function for PC software compatibility (soon released)
- Adding starts counter (count the number of powering on the cube)
- Correcting software stack overflow BUG.

Version 0.11 (Jully 2010):
--------------------------------
- Correcting some minor bugs,
- Adding the on/off status of each effet saved in EEPROM (keep status when powering off)
- Adding the MPLAB projet file which contains the make options
- Moving the Software version in EEPROM
- Adding default EEPROM values in EEPROM.asm file (and Some includes in EEPROM.inc file)

Version 0.09 (March 2010):
--------------------------------
- Adding new function: user can now see the list of availaibles effects in the cube
- Updating the code and improving perfomance
- Adding the possibility to send a animation to the cube, Only one user block is available which can contains 32 frames.
- Adding pic internal eeprom managment (not used now but necessary for future ability.
- General cleaning of code commentary
- Known bug: It's impossible to store an effet who as more than 3 frames. This bug is due to an overflow of an frame index during the reception of the frames. (corrected on next version)

Version 0.07 (February 2010):
--------------------------------
- Improving State machine.
- Adding a list of all animation to be displayed.
- Adding new RS232 commands
- Reorganizing encodes effects
- Updating lkr to be able to activate extended instruction set (not activated yet, but maybe later)
- Correction of software stack bug, introduced in version 0.5 with functions next_effect and previous_effect
- Adding new function => MODE cliving color (similar to philips'one)
- Removing 1 encoded effect (full_couleur) which is very similar to new cliving_color mode
- Adding .hex file for PIC18F4620
- Preparing next functions to be able to download new effects and export existing effects...
- Some minor optimisations

Version 0.01 (January 2010):
--------------------------------
- Update of RS232Interrupt_Handler to be able to modify hardware stack and immediately after interrupt go to the streaming function.
- Adding element on RS232 list for securing code
- Adding first beta implementation of the state machine.
- Several upgrade and clean of code.

Release initiale (January 2010):
--------------------------------
- Initial Release

==============================================================================
==============================================================================
http://nk36.geekaddict.net (section Hypnocube)

LIBRE POUR TOUTE UTILISATION NON COMMERCIALE SEULEMENT
FREE FOR NON-COMMERCIAL USE ONLY