User Ratings
Rate This Project
Login To Rate This Project
Featured Reviews
Highest Rated
This project looks dead, but it is very much alive. This page needs updated enough that it is obvious. I saw last release in 2008 and kept looking for different software. Finally came back here and looked some more. Running on Gentoo Linux. Clone the git, and in that directory clone fast-cpp-csv-parser into a libfccp sub directory if needed on your system. cmake and make.
Thank you! Microphone arrives in a few days for complete testing.
PS: Ever look into an option using the Digilent Analog Discovery 2 for signal output and capture? Just a thought as they aren't real expensive and proper IO.
EDIT: In response to the question about if I'm able to supply some code, unfortunately this is beyond my abilities.
Reply from AUDio MEasurement System
Lowest Rated
Please tell us how this can be compiled for Linux.
Reply from AUDio MEasurement System
User Reviews
-
Hello, My main interest was to plot the frequency response of my R2R tape recorder after it was serviced. After a lot of digging I stumbled on this software which solved this issue for me in a very easy way. For this a big THANK YOU. Although some of these topics may be solved using CSV export, this is what I felt missing: -The graph cannot be switched to linear. Unfortunately, the logarithmic scale crams 10kHz to 20kHz in a very small portion of the screen, it is very hard to see something there. And this is an area where interesting things happens usually in audio domain. -The max frequency of the graph is 20kHz, I was very interested to see what is the frequency response above 20 kHz. There are currently sound cards that are going at 96kHz or more, so for this sampling rate, you can have a max frequency of 48kHz, according to Nyquist. - You cannot set the graph amplitude range to see more details in the picture after measurement. -I wanted to compare source vs tape on the same graph but I did not managed, maybe I missed something. That can be done with Excel of course, however it is more work. Best regards, DanielReply from AUDio MEasurement System
-
I use AUDio MEasurement System with USB-Audio 2.0 adaptor - HD USB Audio AS372N 192 kHz 24 bit mode is great! I can use it to output 80 kHz signal all right. I use oscilloscope to check the output waveform. I think, it is possible to make VNA - Vector Network Analyzer with it. Just add series current sense resistor and output 60 kHz sine wave and measure the source voltage and voltage between device under test, you can get both voltage and current. You can get impedance of the device under test.
-
Nice and small! BUT... would like to have sweeps available.Reply from AUDio MEasurement System
-
I have searched around for several Audio Oscilloscope programs on the net and this is one which ticks many measurement requirements. It has the Generator, Oscilloscope, Spectrum Analyzer as well as a setup to play out Audio and read it back to have a Frequency Response measurement. The app is very small and code efficient. I tried to compile it under Win10 and was unsuccessful initially. After trying for a while I could figure out and do a full compilation and run the code. So am writing a few elaborations/corrections in the git tab under Compiling for "Windows 10 with MinGW" that were found. 1. Was giving commands under cmd.exe windows command prompt. That is wrong. The commands written here are for Git-Bash shell. This will get installed after you install "Git-2.26.2-64-bit.exe". It gets installed as a desktop shortcut from where it will open its own command window. 2. System Environment Variables: You need to add the following using the windows "System Properties->Environment Variables" window. HOMEDRIVE = "c:" or whichever drive is Windows HOMEPATH = "\Users\yourUserName" or whichever is your home directory 3. Next add the paths to the compiler and Cmake also in System Environment Variables under User variables, if they are not there. '"C:\Program Files (x86)\mingw-w64\i686-8.1.0-posix-sjlj-rt_v6-rev0\mingw32\bin"' '"C:\Program Files\CMake\bin"' 4. If you had a previous MinGW installation, say in "C:\MinGW", the method here will install one more under "C:\Program files (x86)" . Only the "Program files (x86)" path should be retained in PATH environment variable. Still better to uninstall the "C:\MinGW" itself. 5. After all this, the compilation happened successfully. 6. The last five copy commands for "Install Libraries:" .dll's are also not really required. The first three files are found by Windows using PATH, as they are in the mingw32/bin directory anyway. The next two need to be copied because the wxwidgets is installed in a higher directory. Adding "C:\Users\yourUsername\projects\wx3.0.5\lib\gcc810_dll" to PATH solved that also. 7. There may be an error in first copy cmd "cp /c/Program\ Files\ \(x86\)/mingw-w64/i686-8.1.0-posix-sjlj-rt_v6-rev0/mingw32/bin/libwinpthread-1.dll." - There should be a spcace before last dot "cp /c/Program\ Files\ \(x86\)/mingw-w64/i686-8.1.0-posix-sjlj-rt_v6-rev0/mingw32/bin/libwinpthread-1.dll ." 8. While running AudMes.exe, if you are getting error like "wxbase30ud_gcc810.dll" not found. Then the issue is that you are using CMake in Debug mode. The available library is "wxbase30u_gcc810.dll" which does not have 'd' in middle. You have to use Release mode. The flag for this is '-DCMAKE_BUILD_TYPE:STRING=Release' Why this gets set to Debug under command prompt is I dont know. But it seems to be in Release when done under Git-Bash shell. 9. Another small correction is in the sentence 'Make sure you have wingw-w64 and cmake in your bash path', it should be 'mingw-w64'.Reply from AUDio MEasurement System
-
Not workin in mac, catalina, 10.15.7 Process: AudMes [68937] Path: /private/var/folders/*/AudMeS.app/Contents/MacOS/AudMes Identifier: audmes Version: 2020-05 (202005) Code Type: X86-64 (Native) Parent Process: ??? [1] Responsible: AudMes [68937] User ID: 501 Date/Time: 2020-12-06 17:23:27.768 -0300 OS Version: Mac OS X 10.15.7 (19H2) Report Version: 12 Anonymous UUID: 414FC416-07EA-5E93-B39E-613A6D91836C Sleep/Wake UUID: BCD74C39-5407-4E65-A31D-C974A2F9C398 Time Awake Since Boot: 380000 seconds Time Since Wake: 35000 seconds System Integrity Protection: enabled Notes: Translocated Process Crashed Thread: 0 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Exception Note: EXC_CORPSE_NOTIFY Termination Reason: DYLD, [0x1] Library missing Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Library not loaded: /usr/local/lib/libwx_baseu-3.1.3.0.0.dylib Referenced from: /private/var/folders/s_/5mqgy2f11sz4vxcmkhkz59wh0000gn/T/AppTranslocation/0A15DD25-15A0-4418-88F7-3C291FFA0D0D/d/AudMeS.app/Contents/Frameworks/libwx_osx_cocoau_core-3.1.dylib Reason: image not foundReply from AUDio MEasurement System
-
This project looks dead, but it is very much alive. This page needs updated enough that it is obvious. I saw last release in 2008 and kept looking for different software. Finally came back here and looked some more. Running on Gentoo Linux. Clone the git, and in that directory clone fast-cpp-csv-parser into a libfccp sub directory if needed on your system. cmake and make. Thank you! Microphone arrives in a few days for complete testing. PS: Ever look into an option using the Digilent Analog Discovery 2 for signal output and capture? Just a thought as they aren't real expensive and proper IO. EDIT: In response to the question about if I'm able to supply some code, unfortunately this is beyond my abilities.Reply from AUDio MEasurement System
-
- make fails under openSuSE, as libfccp/csv.h can't be found. No idea, where to get it. - makefile.linux demands, not to edit the makefile, as it has been made by ./configure. I recommend to add all Autoconf-files to the package, so that everybody can check necessairy package-installations. - Read about a guy asking for help with Linux-installation in 2008, who got the answer, that AudMeS can't be compile for Linux in 2017 ?!? How about a slightly better support? Unfortunately I cannot rate features and design. Let's get better every day... kr, sepp2glReply from AUDio MEasurement System
-
I spent time with this as it stated that it could be built on Linux. However, as soon as you see #include <windows.h> with no conditionals around it you start to wonder. I already have WxWidgets configured, but from HWAVE, LPWAVEHDR and dozens of others Windows structures that are used I don't see that this is worth continuing unless he can supply conversions.Reply from AUDio MEasurement System
-
Generates signals OK, but quit responding when [File] was selected on Windows 10 Home 64-bit 10.0.18362. No installation required! Yay!! Does not generate arbitrary frequencies (e.g. exactly 400Hz), but is a nice simple utility for testing with constant tones. Pink and/or white noise would be nice to have..Reply from AUDio MEasurement System
-
Audmes is good! Thanks.
-
Please tell us how this can be compiled for Linux.Reply from AUDio MEasurement System
- Previous
- You're on page 1
- Next