Arduino mySQM Sky Quality Meter Files

==================================================================================
mySQMPROLUSB Linux Application for mySQMPRO controllers (USB Serial)
(c) Robert Brown 2019-2021. All rights reserved.
==================================================================================

==================================================================================
USING mySQMPRO CONTROLLERS WITH LINUX
==================================================================================
There are a number of ways you can use a mySQMPRO Controller with Linux systems.

1. mySQMPROLUSB Linux application 


mySQMPROLUSB LINUX APPLICATION
The provided LINUX application was developed and tested on UBUNTU with the MATE desktop environment, and supports Serial USB connections to a mySQMPRO controller.

After recompiling the source, copy the mysqmprolusb  AND mysqmprolusb.ini files to a user folder on your Linux system (like a folder under the desktop)


mysqmprolusb.ini SETTINGS INI FILE
This file is used to save and restore the application settings.

[SETTINGS]
serialportname=/dev/ttyUSB0
serialspeed=0
delayonconnect=2
serialreadtime=5
loginterval=60000
logfilepath=/home/rufus/Desktop/LogFiles
logerrors=1
logdata=1
logcs2=1
cloudVeryCloudy=59.9
cloudCloudy=34
dayVeryLight=100
dayLight=10



CHANGE PORT SETTINGS IN THE mysqmprolusb.ini FILE
The INI file will need changing. There is a string for the variable comport which looks like

serialportname=/dev/ttyS0

You will need to change the com port string to what is used for your system. For Raspberry PI it is more likely that string will look like

serialportname=/dev/ttyUSB0



CHANGE LOG FILE LOCATION SETTINGS IN THE mysqmprolusb.ini FILE
The INI file will need changing. There is a string for the variable logfilepath which looks like

logfilepath=

You will need to specify the path where your log files will be stored. The path below points to user bob’s home folder, and there is a folder on bob’s desktop called myLogFiles

logfilepath=/home/bob/Desktop/myLogFiles

After making the required changes to the mysqmprolusb.ini file, save the file.

Alternatively, when the application runs the first time, it will detect that the logfile path has not been specified in the INI file and ask you to specify the folder where the log files can be saved. Once this is specified, then the log path is saved for future use.



REQUIRED GROUP PERMISSION
You must be a member of the group tty (Ubuntu-Mate) (others are the dialout group)
Use menu, administration, users and groups, manage groups, tty, properties
and ensure that your name is checked, then click OK



FLAG APPLICATION AS EXECUTABLE
Run a terminal window (as root) in the folder and change permissions of file

chmod +x mysqmprolusb

or you can right mouse click the file, properties, permissions and check allow 
executing file as program.


I had to right mouse click file and chose run as adminstrator. It seems it cannot connect to tty0 device without admin privilege.



OTHER LINUX SYSTEMS
You will need to recompile the source code using Lazarus Pascal, in order to run the application on a different Linux system (or Raspberry Pi). The code was generated on a 32bit Intel based CPU.


INSTALL THE ARDUINO IDE
To install the Arduino IDE so you can program the controller, open a terminal window and type the following commands

sudo apt-get update
sudo apt-get install Arduino


INSTALL LAZARUS
If you need to recompile the source code, you will need to install Lazarus

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install fpc
sudo apt-get install Lazarus


RE-COMPILING THE SOURCE
To recompile the source, 
Download the source files and extract the zip file into a folder. 
Start Lazarus
Menu-Project-Open
Goto the source folder and open the mysqmprollp.lpi file in Lazarus
From the menu bar select Run-Compile. 
Once the program is built, the mysqmprolusb file can be executed.

When the program is first executed, and you did not specify where the log files are to saved, the application will first ask where to save the log files. After selecting a folder location, the application will save the log file path and continue.


HOW TO FIND SERIAL PORT
Connect controller to USB port
Start Arduino IDE
Look at menu Tools - it should say something like Port: "/dev/ttyUSB0"


ISSUE WITH SERIAL PORT BEING BUSY/LOCKED
Goto /var/
Delete the file LCK..ttyUSB0
(Hint it might be LCK..ttyS0)
Then run the program again


https://tldp.org/HOWTO/Serial-HOWTO-13.html

PLEASE READ THE DOCUMENTS FOR MORE INFORMATION
The documents are located in the Zip file under the Documents folder.