Download Latest Version
myFP2-UserGuide-336-05.pdf (11.4 MB)
Get an email when there's a new version of Arduino ASCOM Focuser Pro2 DIY
| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| L9110S_NOKIA_F_03_Gerbers.zip | 2024-03-22 | 123.9 kB | |
| Board Components.txt | 2024-03-22 | 1.3 kB | |
| PCB L9110S_NOKIA_03_All.zip | 2024-03-22 | 827.3 kB | |
| Readme.txt | 2024-03-22 | 1.3 kB | |
| L9110S_NOKIA_F_03_pcb.jpg | 2024-03-22 | 504.7 kB | |
| L9110S_NOKIA_F_03_schem.png | 2024-03-22 | 246.4 kB | |
| L9110S_NOKIA_F_03_Layout.png | 2024-03-22 | 67.0 kB | |
| Totals: 7 Items | 1.8 MB | 0 | |
The PCB can then be ordered directly on-line. BOARD FIRMWARE FILE TO USE L9110S-NOKIA L9110S-NOKIA myFOCUSERPRO2 PCB PURCHASE - L9110S-NOKIA FULL DRIVER BOARD The current PCB (double sided, plated through holes, silk screened, professionally made) can be ordered (with or without a part pack not all parts are in the pack and some may need to be purchased from an alternative supplier such as eBay) at https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/FRITZING%20PCB%20FOR%20ALL%20VERSIONS/To%20Order%20PCB.txt/download The FULL Board can be used in Minimal mode by not mounting the components for the switches, temperature probe and display. In this case the full board would be programmed with the minimal firmware and would run as a minimal driver board. L9110S Driver Board - Up to 800mA per coil - Supply voltage 2.5-12VDC - Small Size - Low Cost - Full Stepping and half steps only - needs to be used with geared stepper like PG27 - Bipolar stepper motors only http://www.ebay.com/itm/Arduino-L9110S-H-bridge-Stepper-Motor-Dual-DC-Motor-Driver-Control-Board-/191736182097 shieldsfans 1.00 http://www.ebay.com/itm/L9110S-H-bridge-Stepper-Motor-Dual-DC-motor-Driver-Controller-Board-for-Arduino-/262136733719 good-module 1.26