From: <gre...@ya...> - 2003-02-26 20:36:39
|
Don't know what to tell you. until you get it fixed (or until the developers get it fixed, depending on the actual problem) you might try snes9x. I dunno if you can run it under the console though. --- Kevin Barr <km...@in...> wrote: > It's a ZSNES only problem, and only when run without > X. > It is in a upright arcade cabinet that has been > "MAMEd". The joysticks and buttons are run through a > keyboard encoder [note: I have the same problem if I > connect a standard keyboard]. > > It is possible to reprogram the encoder to produce > different keycodes, then change the mappings in > MAME, Daphne, Advmenu, and everything else; but I'm > not really willing to do this to work around one > piece of broken software. > > I'm guessing the whole Linux/no GUI thing makes me > an atypical ZSNES user. > > > -----Original Message----- > From: > "gre...@ya..."<gre...@ya...> > Sent: 02/25/2003 11:38:26 PM > To: > "zsn...@li..."<zsn...@li...> > Subject: Re: [Zsnes-main] Still Having Linux > Keyboard Problems > To start with let me say this. > I am in no way whatsoever qualified to answer > this > question. > > > which distribution are you using? Is it one you > have > used for a while? > > do you use some non-standard keymap? do you > have a > wierd keyboard? (i.e. any extra buttons). > > on a side note... MAME is open source You can > prolly > change which keys control the start buttons. > > Is this a console problem (does it happen EVERY > time > you use the console... not just in zsnes) > > or is it a MAME-only problem? > > or is it a ZSNES-only problem? > > if the answer is either 1 or 2 then this is > probably > the wrong mailing list. > > now that I think of it... why are using trying > to use > the MAME 1 and 5 buttons in zsnes..... is there > something I'm missing? > > --- Kevin Barr <km...@in...> wrote: > > I haven't been able to figure-out my keyboard > > problems, but I can give a > > little better description of what's actually > > happening. > > > > I'm running ZSNES from Linux console mode, > using SDL > > custom-compiled > > with svgalib support. It runs perfectly, > EXCEPT the > > key mappings are > > incorrect. Every key is read incorrrectly as a > key > > like one row above > > and half a row over, for instance "a" is read > as > > "u", "s" as "i", etc. > > > > I thought the simple solution would be to > remap the > > controls [it doesn't > > really matter what key ZSNES thinks it is, so > long > > as it does what it's > > supposed to], but my start and select [coin] > buttons > > are encoded to the > > standard MAME "1" and "5" keys, and > unfortunately > > there's nothing a row > > up and half a row over from the number keys, > so > > ZSNES is unable to read > > these. > > > > Also, this isn't a problem if I launch X and > run > > ZSNES under that, but > > that is not a permanent option for the > cabinet. On > > the same cabinet, > > Daphne which uses the same SDL-svgalib > combination > > does not have this > > problem [nor does any other application]. > > > > Is there some way to force ZSNES or SDL to use > > different keyboard > > routines? Does anyone have an idea, at least, > just > > which application to > > blame for the problem? > > > > -- > > Kevin Barr > > > > > ===== > Which question is it's own answer? > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, > more > http://taxes.yahoo.com/ > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Scholarships > for Techies! > Can't afford IT training? All 2003 ictp students > receive scholarships. > Get hands-on training in Microsoft, Cisco, Sun, > Linux/UNIX, and more. > www.ictp.com/training/sourceforge.asp > _______________________________________________ > Zsnes-main mailing list > Zsn...@li... > > https://lists.sourceforge.net/lists/listinfo/zsnes-main > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Scholarships for > Techies! > Can't afford IT training? All 2003 ictp students > receive scholarships. > Get hands-on training in Microsoft, Cisco, Sun, > Linux/UNIX, and more. > www.ictp.com/training/sourceforge.asp > _______________________________________________ > Zsnes-main mailing list > Zsn...@li... > https://lists.sourceforge.net/lists/listinfo/zsnes-main ===== Which question is it's own answer? __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ |