From: Stephen L. <sa...@wr...> - 2002-07-18 15:35:09
|
Hi All Guy, I have zhcon installed on RH7.3 and have no idea how to edit/input Chinese under console environment. Kindly advise or a pointer would be appreciated. Thanks in advance. Stephen Liu |
From: Stephen L. <sa...@wr...> - 2002-07-19 06:18:45
|
Hi Mr. Hu, No. I can't start zhcon. How to get it run. Thanks Stephen At 10:02 AM 7/19/2002 +0800, Hu Yong wrote: >Please desc in detail. >Can not run zhcon? >If you are running zhcon, press ctrl+H to get help. >----- Original Message ----- >From: "Stephen Liu" <sa...@wr...> >To: <zhc...@li...> >Sent: Thursday, July 18, 2002 11:34 PM >Subject: [Zhcon-users] How to edit/input Chinese in console environment > > > > Hi All Guy, > > > > I have zhcon installed on RH7.3 and have no idea how to edit/input Chinese > > under console environment. > > > > Kindly advise or a pointer would be appreciated. > > > > Thanks in advance. > > > > Stephen Liu > > > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _______________________________________________ > > Zhcon-users mailing list > > Zhc...@li... > > https://lists.sourceforge.net/lists/listinfo/zhcon-users > > |
From: Stephen L. <sa...@wr...> - 2002-07-19 14:11:43
|
Dear Mr. Hu, No error message of any kind was indicated at time of its installation. I also add /etc/boot/grub/grub.conf vga=0x303 image=/boot/vmlinuz label=FrameBuf and re-boot Linux I locate it was there # locate zhcon /etc/zhcon.conf.sample /etc/zhcon.conf /root/.kde/share/apps/RecentDocuments/zhcon-0.2.1-2.i586.rpm.desktop /root/.kde/share/apps/RecentDocuments/zhcon.desktop /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_chinese.gif_368e8f4b /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download.html_44887b42 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_Library_link_no_underline.css_59451e72 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_tux216sm.gif_767f166b /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_english.gif_58a290f4 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_google.gif_69671039 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_rndcorner.gif_0869c6f5 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_bullet.gif_26196bf7 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_input_big5.tar.bz2_3f4ca126 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_input_gb2312.tar.bz2_37c3a340 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_font_big5.tar.bz2_34b8d631 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_font_gb2312.tar.bz2_21691fa1 /root/.kde/share/cache/http/z/zhcon.gnuchina.org_manual.html_688d93b4 /root/zhcon-0.2.1 /root/zhcon-0.2.1/Makefile.i In fact I have no idea how to get it started because in my RH7.3 box I have only 2 desktop, KDE and GNOME. Can you advise me ; 1) How to check whether the software has been properly installed 2) How to start Xterm window to run this program. Thanks Stephen At 06:27 PM 7/19/2002 +0800, you wrote: >any error message or hang? >----- Original Message ----- >From: "Stephen Liu" <sa...@wr...> >To: "Hu Yong" <ccp...@on...>; <zhc...@li...> >Sent: Friday, July 19, 2002 2:18 PM >Subject: Re: [Zhcon-users] How to edit/input Chinese in console environment > > > > Hi Mr. Hu, > > > > No. I can't start zhcon. How to get it run. > > > > Thanks > > > > Stephen > > > > > > At 10:02 AM 7/19/2002 +0800, Hu Yong wrote: > > >Please desc in detail. > > >Can not run zhcon? > > >If you are running zhcon, press ctrl+H to get help. > > >----- Original Message ----- > > >From: "Stephen Liu" <sa...@wr...> > > >To: <zhc...@li...> > > >Sent: Thursday, July 18, 2002 11:34 PM > > >Subject: [Zhcon-users] How to edit/input Chinese in console environment > > > > > > > > > > Hi All Guy, > > > > > > > > I have zhcon installed on RH7.3 and have no idea how to edit/input >Chinese > > > > under console environment. > > > > > > > > Kindly advise or a pointer would be appreciated. > > > > > > > > Thanks in advance. > > > > > > > > Stephen Liu > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > This sf.net email is sponsored by:ThinkGeek > > > > Welcome to geek heaven. > > > > http://thinkgeek.com/sf > > > > _______________________________________________ > > > > Zhcon-users mailing list > > > > Zhc...@li... > > > > https://lists.sourceforge.net/lists/listinfo/zhcon-users > > > > > > > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _______________________________________________ > > Zhcon-users mailing list > > Zhc...@li... > > https://lists.sourceforge.net/lists/listinfo/zhcon-users |
From: Stephen L. <sa...@wr...> - 2002-07-20 11:11:46
|
Dear Mr. Hu, Thanks for your response 1) My test according to ejoy's advice failed. 2) At 11:28 AM 7/20/2002 +0800, Hu Yong wrote: >If want to use CJK in X's console, you may use rvxt. Where can I find "rvxt" for Chinese to download. I found Linux-Nihongo from Internet which is for "Terminal Emulator for Japanese" and also http://us.dl.sourceforge.net/sourceforge/gnu-darwin/direct_download/packages/multi/chinese/ I assume "zh-tw-rxvt-2.6.3 tgz" is for Big5. However I expect to find a "rvxt" for both Big5 and GB. Have you had any idea ? Thank in advance. B.Regards Stephen >zhcon only used in pure console. You can press ctrl+alt+F1 to switch to it. >login and type zhcon to try it. > > > Dear Mr. Hu, > > > > No error message of any kind was indicated at time of its installation. I > > also add > > > > /etc/boot/grub/grub.conf > > vga=0x303 > > image=/boot/vmlinuz > > label=FrameBuf >select FrameBuf when linux start. >Did you see that logo when start? > > >----- Original Message ----- >From: "Stephen Liu" <sa...@wr...> >To: "Hu Yong" <ccp...@on...>; <zhc...@li...> >Sent: Friday, July 19, 2002 10:11 PM >Subject: Re: [Zhcon-users] How to edit/input Chinese in console environment > > > > Dear Mr. Hu, > > > > No error message of any kind was indicated at time of its installation. I > > also add > > > > /etc/boot/grub/grub.conf > > vga=0x303 > > image=/boot/vmlinuz > > label=FrameBuf >select FrameBuf > > > > > and re-boot Linux > > > > I locate it was there > > > > # locate zhcon > > /etc/zhcon.conf.sample > > /etc/zhcon.conf > > /root/.kde/share/apps/RecentDocuments/zhcon-0.2.1-2.i586.rpm.desktop > > /root/.kde/share/apps/RecentDocuments/zhcon.desktop > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_chinese.gif_368e8f4b > > /root/.kde/share/cache/http/z/zhcon.gnuchina.org_download.html_44887b42 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_Library_link_no_underline.c >ss_59451e72 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_tux216sm.gif_767f166 >b > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_english.gif_58a290f4 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_google.gif_69671039 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_rndcorner.gif_0869c6 >f5 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_images_bullet.gif_26196bf7 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_input_big5.tar.bz2 >_3f4ca126 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_input_gb2312.tar.b >z2_37c3a340 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_font_big5.tar.bz2_ >34b8d631 > > >/root/.kde/share/cache/http/z/zhcon.gnuchina.org_download_font_gb2312.tar.bz >2_21691fa1 > > /root/.kde/share/cache/http/z/zhcon.gnuchina.org_manual.html_688d93b4 > > /root/zhcon-0.2.1 > > /root/zhcon-0.2.1/Makefile.i > > > > > > In fact I have no idea how to get it started because in my RH7.3 box I >have > > only 2 desktop, KDE and GNOME. > > > > Can you advise me ; > > > > 1) How to check whether the software has been properly installed > > 2) How to start Xterm window to run this program. > > > > Thanks > > > > Stephen |