I got the dongle to work inconsistently on "2.6.22.18-omap1" ,configured the same as earlier in the post.The dongle works fresh out of the box.But on second and consecutive attempts it stops working and goes into reset mode.

fail log:

hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
usb 1-1.3: new full speed USB device using musb_hdrc and address 4
usb 1-1.3: not running at top speed; connect to a high speed hub
usb 1-1.3: default language 0x0409
usb 1-1.3: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-1.3: Product: USB2.0 WLAN
usb 1-1.3: Manufacturer: Belkin
usb 1-1.3: device v050d p705c is not supported
usb 1-1.3: uevent
usb 1-1.3: usb_probe_device
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
usb 1-1.3:1.0: uevent
usb 1-1.3:1.0: uevent
zd1211rw 1-1.3:1.0: usb_probe_interface
zd1211rw 1-1.3:1.0: usb_probe_interface - got id
usb 1-1.3: print_id() 050d:705c v4810 full
usb 1-1.3: reset full speed USB device using musb_hdrc and address 4
zd1211rw 1-1.3:1.0: zd_netdev_alloc() netdev->flags 0x1002
zd1211rw 1-1.3:1.0: zd_netdev_alloc() netdev->features 0x00000000
usb 1-1.3: request_fw_file() fw name zd1211/zd1211b_ub
usb 1-1.3: upload_firmware() firmware device id 0x4810 is equal to the actual device id
usb 1-1.3: request_fw_file() fw name zd1211/zd1211b_uphr
usb 1-1.3: upload_code() transfer size 4096
usb 1-1.3: upload_code() transfer size 1024
usb 1-1.3: upload_code() firmware confirm return value 0x01
usb_endpoint usbdev1.4_ep01: ep_device_release called for usbdev1.4_ep01
usb_endpoint usbdev1.4_ep82: ep_device_release called for usbdev1.4_ep82
usb_endpoint usbdev1.4_ep83: ep_device_release called for usbdev1.4_ep83
usb_endpoint usbdev1.4_ep04: ep_device_release called for usbdev1.4_ep04
zd1211rw 1-1.3:1.0: zd_usb_enable_int()
zd1211rw 1-1.3:1.0: zd_usb_enable_int() submit urb c4623260
zd1211rw 1-1.3:1.0: zd_chip_init_hw()
usb 1-1.3: int_urb_complete() error: urb c4623260 wrong type
zd1211rw 1-1.3:1.0: zd_usb_ioread16v() read timed out
zd1211rw 1-1.3:1.0: zd_ioread32v_locked() error: zd_ioread16v_locked. Error number -110
zd1211rw 1-1.3:1.0: dump_cr() error reading CR_AFTER_PNP. Error number -110
zd1211rw 1-1.3:1.0: zd_usb_disable_int() urb c4623260 killed
zd1211rw 1-1.3:1.0: probe() couldn't initialize mac. Error number -110
usb 1-1.3: reset full speed USB device using musb_hdrc and address 4
usb_endpoint usbdev1.4_ep01: ep_device_release called for usbdev1.4_ep01
usb_endpoint usbdev1.4_ep82: ep_device_release called for usbdev1.4_ep82
usb_endpoint usbdev1.4_ep83: ep_device_release called for usbdev1.4_ep83
usb_endpoint usbdev1.4_ep04: ep_device_release called for usbdev1.4_ep04
zd1211rw: probe of 1-1.3:1.0 failed with error -110
usbtest 1-1.3:1.0: usb_probe_interface
usbtest 1-1.3:1.0: usb_probe_interface - got id
drivers/usb/core/inode.c: creating file '004'
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
usb 1-1.3: usb auto-suspend
#


does anyone have some ideas?

Thanks
Sundar


On Tue, Oct 7, 2008 at 3:30 PM, Sundar Visvanathan <fcrd73@gmail.com> wrote:
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub
>usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the actual device id
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr
>usb 1-1.1: upload_code() transfer size 4096
>usb 1-1.1: upload_code() transfer size 1024
>usb 1-1.1: upload_code() firmware confirm return value 0x01

When you plug the dongle in at the first time,the firmware files get uploaded in the correct way(ref: first section of dmesg log). It errors out when you do an 'ifconfig' subsequently. My firmware files are located in /lib/firmware/zd1211/.

thanks for the reply.
Sundar

On Tue, Oct 7, 2008 at 3:02 PM, Hin-Tak Leung <htl10@users.sourceforge.net> wrote:
--- On Tue, 7/10/08, Sundar Visvanathan <fcrd73@gmail.com> wrote:
<snipped>
> usb 1-1.1: USB control request for firmware upload failed.
> Error number -110
>
> usb 1-1.1: Could not upload firmware code uph. Error number
> -110
> zd1211rw 1-1.1:1.0: couldn't load firmware. Error
> number -110

firmware upload failed. check your firmware files?