No graphs...

  • Carl Inglis

    Carl Inglis - 2012-06-22

    As far as I can tell, from the debug logs, the messages are being passed to Xymon correctly formatted.

    I am getting no errors in my logs.

    Here's the top of the client data that's being sent:

    client lin-virthost-03.linux linux
    Fri Jun 22 11:08:26 BST 2012
    Linux lin-virthost-03 VMware ESXi 5.0.0 build-469512 
    VMware ESXi 5.0.0 build-469512 
     11:08:26 up 44 days, 18:23,  0 users,  load average: 0.11, 0.12, 0.12
     Filesystem         1024-blocks      Used Available Capacity Mounted on
     1_VMFS-5            137363456    994304 136369152       1% /vmfs/volumes/vh-03-vmware-boot-drive
     2_VMFS-5            427556864   1803264 425753600       0% /vmfs/volumes/virthost-03-local-store
     3_VMFS-5           377461145619535718401821039616      52% /vmfs/volumes/lin-san-01-lun-0-datastore
     4_vfat                4192960     21888   4171072       1% /vmfs/volumes/4_vfat
     5_vfat                 255716    130496    125220      51% /vmfs/volumes/5_vfat
     6_vfat                 255716         8    255708       0% /vmfs/volumes/6_vfat
     7_vfat                 292688    180408    112280      62% /vmfs/volumes/7_vfat
                 total       used       free     shared    buffers     cached
    Mem:      50319360   27797504   22521856     241664    1203200     961710
    -/+ buffers/cache:    1203200     961710    
    Swap:      2406400          0    2406400

    I'm not getting any graphs apart from TCP/IP connection times from Xymon. RRDTOOL dump shows NaN being stored in the RRD.

    Any pointers as to where to look, or any further diagnostic steps, would be appreciated.



  • Gudmo

    Gudmo - 2012-06-22

    Hi Carl

    The first line

    Should not be there

    If that is what is being sent it might be the cause of your problems.


  • Carl Inglis

    Carl Inglis - 2012-06-25

    Hi Gudmo,

    Sorry, I wasn't clear on the source of that information - that was from the "Client Data is available" link just above the (blank) graph. Looking at the client data on a working graph I see the same format information:

    client lin-lnx01-1.linux linux
    Mon Jun 25 08:34:47 BST 2012
    Linux lin-lnx01-1 2.6.5-7.257-default i686
    SUSE LINUX Enterprise Server 9 (i586)
      8:34am  up 47 days 21:33,  0 users,  load average: 0.00, 0.00, 0.00
    Filesystem         1024-blocks      Used Available Capacity Mounted on
    /dev/sda5            105535780 101052364   4483416      96% /
    /dev/sda5 on / type reiserfs (rw,acl,user_xattr)
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    tmpfs on /dev/shm type tmpfs (rw)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    usbfs on /proc/bus/usb type usbfs (rw)
                 total       used       free     shared    buffers     cached
    Mem:       1035664    1022140      13524          0      50688     683576
    -/+ buffers/cache:     287876     747788
    Swap:      1052280      11612    1040668

    Further digging is showing that the data is being correctly parsed and passed to xymond_rrd, so I suspect the problem lies therein, and not with this project.

    If I work out what the problem is, I'll add the information to this thread for future reference.

    Thanks for a really useful project.




Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

No, thanks