|
From: <orr...@us...> - 2009-03-11 20:40:25
|
Revision: 14
http://xoonips.svn.sourceforge.net/xoonips/?rev=14&view=rev
Author: orrisroot
Date: 2009-03-11 20:40:05 +0000 (Wed, 11 Mar 2009)
Log Message:
-----------
rebuild autotools
supported make dist command
changed version to 0.5.1-p1
Modified Paths:
--------------
extras/xlhtml/trunk/INSTALL
extras/xlhtml/trunk/Makefile.am
extras/xlhtml/trunk/Makefile.in
extras/xlhtml/trunk/aclocal.m4
extras/xlhtml/trunk/cole/Makefile.am
extras/xlhtml/trunk/cole/Makefile.in
extras/xlhtml/trunk/config.guess
extras/xlhtml/trunk/config.sub
extras/xlhtml/trunk/configure
extras/xlhtml/trunk/configure.in
extras/xlhtml/trunk/install-sh
extras/xlhtml/trunk/missing
extras/xlhtml/trunk/ppthtml/Makefile.am
extras/xlhtml/trunk/ppthtml/Makefile.in
extras/xlhtml/trunk/xlhtml/Makefile.am
extras/xlhtml/trunk/xlhtml/Makefile.in
extras/xlhtml/trunk/xlhtml/doxygen.conf
Added Paths:
-----------
extras/xlhtml/trunk/xlhtml.spec.in
Removed Paths:
-------------
extras/xlhtml/trunk/mkinstalldirs
extras/xlhtml/trunk/stamp-h.in
extras/xlhtml/trunk/xlhtml/version.h
extras/xlhtml/trunk/xlhtml.spec
Modified: extras/xlhtml/trunk/INSTALL
===================================================================
--- extras/xlhtml/trunk/INSTALL 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/INSTALL 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,38 +1,54 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -51,52 +67,55 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
@@ -107,7 +126,7 @@
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -122,48 +141,86 @@
Specifying the System Type
==========================
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Operation Controls
+Defining Variables
==================
- `configure' recognizes the following options to control how it
-operates.
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
+ ./configure CC=/usr/local2/bin/gcc
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
`--help'
+`-h'
Print a summary of the options to `configure', and exit.
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
`--quiet'
`--silent'
`-q'
@@ -175,8 +232,6 @@
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
-`configure' also accepts some other, not widely useful, options.
Modified: extras/xlhtml/trunk/Makefile.am
===================================================================
--- extras/xlhtml/trunk/Makefile.am 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/Makefile.am 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,3 +1,7 @@
+AUTOMAKE_OPTIONS = 1.9
+
SUBDIRS = cole xlhtml ppthtml
-EXTRA_DIST = README-xlhtml README-ppthtml
+EXTRA_DIST = Makefile.bc Makefile.vc debian/*
+dist-hook:
+ cd $(top_distdir) && find . -name '.svn' -type d | xargs rm -rf
Modified: extras/xlhtml/trunk/Makefile.in
===================================================================
--- extras/xlhtml/trunk/Makefile.in 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/Makefile.in 2009-03-11 20:40:05 UTC (rev 14)
@@ -34,18 +34,18 @@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
- config.guess config.sub depcomp install-sh missing \
- mkinstalldirs
+ $(srcdir)/xlhtml.spec.in $(top_srcdir)/configure AUTHORS \
+ COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \
+ install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = xlhtml.spec
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -108,6 +108,7 @@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
@@ -173,27 +174,28 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.9
SUBDIRS = cole xlhtml ppthtml
-EXTRA_DIST = README-xlhtml README-ppthtml
+EXTRA_DIST = Makefile.bc Makefile.vc debian/*
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
- cd $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+ cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -208,9 +210,9 @@
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
-$(top_srcdir)/configure: $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@@ -222,13 +224,15 @@
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
+xlhtml.spec: $(top_builddir)/config.status $(srcdir)/xlhtml.spec.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -405,6 +409,9 @@
|| exit 1; \
fi; \
done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
@@ -600,18 +607,21 @@
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
+ dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \
+ distclean distclean-generic distclean-hdr distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+
+dist-hook:
+ cd $(top_distdir) && find . -name '.svn' -type d | xargs rm -rf
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Modified: extras/xlhtml/trunk/aclocal.m4
===================================================================
--- extras/xlhtml/trunk/aclocal.m4 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/aclocal.m4 2009-03-11 20:40:05 UTC (rev 14)
@@ -370,18 +370,6 @@
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
@@ -543,6 +531,35 @@
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
Modified: extras/xlhtml/trunk/cole/Makefile.am
===================================================================
--- extras/xlhtml/trunk/cole/Makefile.am 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/cole/Makefile.am 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,8 +1,8 @@
-## Process this file with automake to produce Makefile.in
+AUTOMAKE_OPTIONS = 1.9
-EXTRA_DIST = README-cole README-CVS DOWNLOAD ChangeLog ChangeLog-from1to2 TODO THANKS AUTHORS BUGS doc/* examples/* utils/*
+EXTRA_DIST = DOWNLOAD cole-config.in doc/* examples/* utils/*
noinst_LIBRARIES = libcole.a
-libcole_a_SOURCES = cole.c internal.c oledecod.c olecod.c support.c version.c internal.h support.h
+libcole_a_SOURCES = cole.c internal.c olecod.c oledecod.c support.c internal.h support.h
+nodist_libcole_a_SOURCES = version.c cole.h
#AM_CFLAGS = -Wall -Wcast-align -Wpointer-arith
-
Modified: extras/xlhtml/trunk/cole/Makefile.in
===================================================================
--- extras/xlhtml/trunk/cole/Makefile.in 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/cole/Makefile.in 2009-03-11 20:40:05 UTC (rev 14)
@@ -40,7 +40,7 @@
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = version.c cole.h
LIBRARIES = $(noinst_LIBRARIES)
@@ -49,9 +49,10 @@
libcole_a_AR = $(AR) $(ARFLAGS)
libcole_a_LIBADD =
am_libcole_a_OBJECTS = cole.$(OBJEXT) internal.$(OBJEXT) \
- oledecod.$(OBJEXT) olecod.$(OBJEXT) support.$(OBJEXT) \
- version.$(OBJEXT)
-libcole_a_OBJECTS = $(am_libcole_a_OBJECTS)
+ olecod.$(OBJEXT) oledecod.$(OBJEXT) support.$(OBJEXT)
+nodist_libcole_a_OBJECTS = version.$(OBJEXT)
+libcole_a_OBJECTS = $(am_libcole_a_OBJECTS) \
+ $(nodist_libcole_a_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@@ -59,7 +60,7 @@
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libcole_a_SOURCES)
+SOURCES = $(libcole_a_SOURCES) $(nodist_libcole_a_SOURCES)
DIST_SOURCES = $(libcole_a_SOURCES)
ETAGS = etags
CTAGS = ctags
@@ -101,6 +102,7 @@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
@@ -166,14 +168,16 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-EXTRA_DIST = README-cole README-CVS DOWNLOAD ChangeLog ChangeLog-from1to2 TODO THANKS AUTHORS BUGS doc/* examples/* utils/*
+AUTOMAKE_OPTIONS = 1.9
+EXTRA_DIST = DOWNLOAD cole-config.in doc/* examples/* utils/*
noinst_LIBRARIES = libcole.a
-libcole_a_SOURCES = cole.c internal.c oledecod.c olecod.c support.c version.c internal.h support.h
+libcole_a_SOURCES = cole.c internal.c olecod.c oledecod.c support.c internal.h support.h
+nodist_libcole_a_SOURCES = version.c cole.h
all: all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -182,9 +186,9 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign cole/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cole/Makefile'; \
cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign cole/Makefile
+ $(AUTOMAKE) --gnu cole/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -198,9 +202,9 @@
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(top_srcdir)/configure: $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
version.c: $(top_builddir)/config.status $(srcdir)/version.c.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
Modified: extras/xlhtml/trunk/config.guess
===================================================================
--- extras/xlhtml/trunk/config.guess 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/config.guess 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,9 +1,10 @@
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
-timestamp='2006-02-23'
+timestamp='2008-01-08'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -160,6 +161,7 @@
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
@@ -210,7 +212,7 @@
echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
exit ;;
macppc:MirBSD:*:*)
- echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -328,7 +330,7 @@
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
- i86pc:SunOS:5.*:*)
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:6*:*)
@@ -530,7 +532,7 @@
echo rs6000-ibm-aix3.2
fi
exit ;;
- *:AIX:*:[45])
+ *:AIX:*:[456])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
@@ -770,6 +772,8 @@
case ${UNAME_MACHINE} in
pc98)
echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
esac
@@ -777,12 +781,9 @@
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
- i*:MINGW*:*)
+ *:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
- i*:MSYS_NT-*:*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
i*:windows32*:*)
# uname -m includes "-pc" on this system.
echo ${UNAME_MACHINE}-mingw32
@@ -790,12 +791,18 @@
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- x86:Interix*:[345]*)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T:Interix*:[345]*)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
+ *:Interix*:[3456]*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ EM64T | authenticamd)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
@@ -829,6 +836,16 @@
echo ${UNAME_MACHINE}-pc-minix
exit ;;
arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
cris:Linux:*:*)
@@ -947,6 +964,9 @@
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
@@ -989,7 +1009,7 @@
LIBC=gnulibc1
# endif
#else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
+ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
LIBC=gnu
#else
LIBC=gnuaout
@@ -1205,6 +1225,15 @@
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
Modified: extras/xlhtml/trunk/config.sub
===================================================================
--- extras/xlhtml/trunk/config.sub 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/config.sub 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,9 +1,10 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
-timestamp='2006-02-23'
+timestamp='2008-01-16'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -240,15 +241,16 @@
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
+ | fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -274,21 +276,19 @@
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b \
- | strongarm \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
- m32c)
- basic_machine=$basic_machine-unknown
- ;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
@@ -318,18 +318,18 @@
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
+ | avr-* | avr32-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
- | m32r-* | m32rle-* \
+ | m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -358,22 +358,24 @@
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa*-* \
| ymp-* \
| z8k-*)
;;
- m32c-*)
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
@@ -445,6 +447,14 @@
basic_machine=ns32k-sequent
os=-dynix
;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
c90)
basic_machine=c90-cray
os=-unicos
@@ -477,8 +487,8 @@
basic_machine=craynv-cray
os=-unicosmp
;;
- cr16c)
- basic_machine=cr16c-unknown
+ cr16)
+ basic_machine=cr16-unknown
os=-elf
;;
crds | unos)
@@ -670,6 +680,14 @@
basic_machine=m68k-isi
os=-sysv
;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
m88k-omron*)
basic_machine=m88k-omron
;;
@@ -685,6 +703,10 @@
basic_machine=i386-pc
os=-mingw32
;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
miniframe)
basic_machine=m68000-convergent
;;
@@ -811,6 +833,14 @@
basic_machine=i860-intel
os=-osf
;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
pbd)
basic_machine=sparc-tti
;;
@@ -912,6 +942,10 @@
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
sei)
basic_machine=mips-sei
os=-seiux
@@ -923,6 +957,9 @@
basic_machine=sh-hitachi
os=-hms
;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
sh64)
basic_machine=sh64-unknown
;;
@@ -1012,6 +1049,10 @@
basic_machine=tic6x-unknown
os=-coff
;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
tx39)
basic_machine=mipstx39-unknown
;;
@@ -1128,7 +1169,7 @@
sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sparc | sparcv8 | sparcv9 | sparcv9b)
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
basic_machine=sparc-sun
;;
cydra)
@@ -1217,7 +1258,7 @@
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1369,6 +1410,12 @@
# system, and we'll never get to this point.
case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
*-acorn)
os=-riscix1.2
;;
@@ -1378,9 +1425,9 @@
arm*-semi)
os=-aout
;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
@@ -1406,6 +1453,9 @@
m68*-cisco)
os=-aout
;;
+ mep-*)
+ os=-elf
+ ;;
mips*-cisco)
os=-elf
;;
Modified: extras/xlhtml/trunk/configure
===================================================================
--- extras/xlhtml/trunk/configure 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/configure 2009-03-11 20:40:05 UTC (rev 14)
@@ -659,6 +659,9 @@
LDFLAGS
CFLAGS
CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
am__untar
am__tar
AMTAR
@@ -735,6 +738,7 @@
ac_subst_files=''
ac_user_opts='
enable_option_checking
+enable_maintainer_mode
enable_dependency_tracking
'
ac_precious_vars='build_alias
@@ -1374,6 +1378,8 @@
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
@@ -2268,8 +2274,8 @@
# Define the identity of the package.
- PACKAGE=xlhtml/xlhtml
- VERSION=0.5.2
+ PACKAGE=xlhtml
+ VERSION=0.5.1-p1
cat >>confdefs.h <<_ACEOF
@@ -2414,6 +2420,29 @@
ac_config_headers="$ac_config_headers config.h"
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8060,7 +8089,7 @@
-ac_config_files="$ac_config_files Makefile cole/Makefile cole/version.c cole/cole.h xlhtml/Makefile ppthtml/Makefile"
+ac_config_files="$ac_config_files Makefile cole/Makefile cole/version.c cole/cole.h xlhtml/Makefile ppthtml/Makefile xlhtml.spec"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -8159,6 +8188,13 @@
LTLIBOBJS=$ac_ltlibobjs
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
{ { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
@@ -8690,6 +8726,7 @@
"cole/cole.h") CONFIG_FILES="$CONFIG_FILES cole/cole.h" ;;
"xlhtml/Makefile") CONFIG_FILES="$CONFIG_FILES xlhtml/Makefile" ;;
"ppthtml/Makefile") CONFIG_FILES="$CONFIG_FILES ppthtml/Makefile" ;;
+ "xlhtml.spec") CONFIG_FILES="$CONFIG_FILES xlhtml.spec" ;;
*) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
@@ -9511,4 +9548,3 @@
fi
-
Modified: extras/xlhtml/trunk/configure.in
===================================================================
--- extras/xlhtml/trunk/configure.in 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/configure.in 2009-03-11 20:40:05 UTC (rev 14)
@@ -13,12 +13,14 @@
AC_SUBST(HOST_VENDOR)
AC_SUBST(HOST_OS)
-AM_INIT_AUTOMAKE(xlhtml/xlhtml, 0.5.2)
-AM_CONFIG_HEADER(config.h)
+AM_INIT_AUTOMAKE(xlhtml, 0.5.1-p1)
+AC_CONFIG_HEADERS([config.h])
+AM_MAINTAINER_MODE
+
AC_PROG_CC
AC_PROG_RANLIB
-AC_ISC_POSIX
+AC_SEARCH_LIBS([strerror],[cposix])
AC_CHECK_HEADERS(malloc.h)
@@ -59,6 +61,6 @@
AC_SUBST(COLE_MICRO)
-AC_OUTPUT([Makefile cole/Makefile cole/version.c cole/cole.h xlhtml/Makefile ppthtml/Makefile])
+AC_CONFIG_FILES([Makefile cole/Makefile cole/version.c cole/cole.h xlhtml/Makefile ppthtml/Makefile xlhtml.spec])
+AC_OUTPUT
-
Modified: extras/xlhtml/trunk/install-sh
===================================================================
--- extras/xlhtml/trunk/install-sh 2009-03-11 17:56:53 UTC (rev 13)
+++ extras/xlhtml/trunk/install-sh 2009-03-11 20:40:05 UTC (rev 14)
@@ -1,251 +1,519 @@
#!/bin/sh
-#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2006-12-25.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# Copyright (C) 1994 X Consortium
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
-# put in absolute paths if you don't have them in your path; or use env. vars.
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
+stripcmd=
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
+src=
+dst=
+dir_arg=
+dst_arg=
- -d) dir_arg=true
- shift
- continue;;
+copy_on_change=false
+no_target_directory=
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
- -s) stripcmd="$stripprog"
- shift
- continue;;
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
done
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
fi
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=mkdir
- fi
-else
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
fi
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
-pathcomp=''
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
else
- true
+ mkdir_mode=
fi
- pathcomp="${pathcomp}/"
-done
-fi
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
-# If we're going to rename the final executable, determine the name now.
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
-# don't allow the sed command to completely eliminate the filename
+ eval "$initialize_posix_glob"
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
else
- true
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
fi
+ prefix=$prefix/
+ done
-# Make a temp file name in the proper directory.
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
- dsttmp=$dstdir/#inst.$$#
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
-# Mo...
[truncated message content] |