Thread: [XMLPipeDB-developer] Summer 2011 - ok, breaktimes over =D
Brought to you by:
kdahlquist,
zugzugglug
Menu
▾
▴
xmlpipedb-developer
|
From: Richard B. <rbr...@gm...> - 2011-05-24 22:04:48
|
Hi Dondi/Dr. D, My focus is starting to return to GM Builder after I was able to get through the pile of stuff I had waiting for me at the start of summer break. So here is the current status: 1. Emailed Dr. Dorin to discuss options on how this next session might fit into my curriculum requirements now that I have finished all my upper division CS electives. Will fill you in once he and I discuss etc. 2. Spent some time cleaning out the old commented code and compiling the software to make sure I haven't broken anything. Commited the changes up to SourceForge after my testing. ---------------------------------------------------------------------------------------------------------------------------------------- So I know we discussed next steps but before I move forward we should probably have a con call to ensure sync. Mondays aren't good for me anymore but Tues - Thurs all work atm. Lets figure out which day is most convenient and schedule the weekly call. What works for you guys? Richard |
|
From: Kam D. <kda...@lm...> - 2011-05-24 22:28:36
|
Hi, We have a grant due Thursday, so we're pretty focused on working on that right now, so a call probably won't work for us this week. I'm also flexible on call times, I just need to know when. Next week on Tuesday I have a meeting between 12-2:30, but any other time will work. Cheers, Dr. D At 03:04 PM 5/24/2011, Richard Brous wrote: >Hi Dondi/Dr. D, > >My focus is starting to return to GM Builder after I was able to get >through the pile of stuff I had waiting for me at the start of summer break. > >So here is the current status: > >1. Emailed Dr. Dorin to discuss options on how this next session >might fit into my curriculum requirements now that I have finished >all my upper division CS electives. Will fill you in once he and I discuss etc. > >2. Spent some time cleaning out the old commented code and compiling >the software to make sure I haven't broken anything. Commited the >changes up to SourceForge after my testing. > >---------------------------------------------------------------------------------------------------------------------------------------- > >So I know we discussed next steps but before I move forward we >should probably have a con call to ensure sync. Mondays aren't good >for me anymore but Tues - Thurs all work atm. > >Lets figure out which day is most convenient and schedule the weekly >call. What works for you guys? > >Richard > > > |
|
From: John D. N. D. <do...@lm...> - 2011-05-24 23:08:14
|
Yes, this week is grant-proposal-deadline-week for us, but it does give you some time with checking on your curriculum status and reviewing the code as you last left it. I also have a meeting at noon on Tuesday, so in a sense that works out; before that meeting, say 10 or 11, will work better for me than after it. John David N. Dionisio, PhD Associate Professor, Computer Science Loyola Marymount University On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: > Hi, > > We have a grant due Thursday, so we're pretty focused on working on > that right now, so a call probably won't work for us this week. > > I'm also flexible on call times, I just need to know when. Next week > on Tuesday I have a meeting between 12-2:30, but any other time will work. > > Cheers, > Dr. D > > At 03:04 PM 5/24/2011, Richard Brous wrote: >> Hi Dondi/Dr. D, >> >> My focus is starting to return to GM Builder after I was able to get >> through the pile of stuff I had waiting for me at the start of summer break. >> >> So here is the current status: >> >> 1. Emailed Dr. Dorin to discuss options on how this next session >> might fit into my curriculum requirements now that I have finished >> all my upper division CS electives. Will fill you in once he and I discuss etc. >> >> 2. Spent some time cleaning out the old commented code and compiling >> the software to make sure I haven't broken anything. Commited the >> changes up to SourceForge after my testing. >> >> ---------------------------------------------------------------------------------------------------------------------------------------- >> >> So I know we discussed next steps but before I move forward we >> should probably have a con call to ensure sync. Mondays aren't good >> for me anymore but Tues - Thurs all work atm. >> >> Lets figure out which day is most convenient and schedule the weekly >> call. What works for you guys? >> >> Richard >> >> >> > > > ------------------------------------------------------------------------------ > vRanger cuts backup time in half-while increasing security. > With the market-leading solution for virtual backup and recovery, > you get blazing-fast, flexible, and affordable data protection. > Download your free trial now. > http://p.sf.net/sfu/quest-d2dcopy1 > _______________________________________________ > xmlpipedb-developer mailing list > xml...@li... > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer |
|
From: Richard B. <rbr...@gm...> - 2011-05-26 16:42:33
|
I'll suggest Wednesdays at 10am for a weekly call?
A back and forth with Dr. Dorin to discuss where to fit the ongoing work
into my degree requirements is underway at the moment.
Here is the list of enhancements from my end of semester paper:
PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS
- After a clarifying discussion with Dr. Dahlquist, it seems that based
on customer need and overall feature direction, that multiple species
exports should be the highest priority going forward. Based on this fact, I
submit the below list in priority order for discussion.
1. Baseline check against balance of species
- Ms, Mt, Pf(source taxon issue), Pa, and Sa have been successfully
exported post merge
2. Some amount of commented code cleanup left in generic species, UniProt
profile, and overall name2taxon implementation. Also cleanup of non
commented constructor and methods referencing species name.
3. Multi-Species export functionality
- pick up where Don left off regarding GO data
- includes re-factor export wizard
4. TallyEngine queries
5. Data snapshot functionality when linked to different files:
- Link to XML source - surface to user the taxon id's contained within
- Query and return the species with taxon id which currently reside
within a Postgres database
- Return species with taxon id contained within a multi-species gdb
6. Finish Yeast database
RB
On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio <do...@lm...>wrote:
> Yes, this week is grant-proposal-deadline-week for us, but it does give you
> some time with checking on your curriculum status and reviewing the code as
> you last left it. I also have a meeting at noon on Tuesday, so in a sense
> that works out; before that meeting, say 10 or 11, will work better for me
> than after it.
>
> John David N. Dionisio, PhD
> Associate Professor, Computer Science
> Loyola Marymount University
>
>
> On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote:
>
> > Hi,
> >
> > We have a grant due Thursday, so we're pretty focused on working on
> > that right now, so a call probably won't work for us this week.
> >
> > I'm also flexible on call times, I just need to know when. Next week
> > on Tuesday I have a meeting between 12-2:30, but any other time will
> work.
> >
> > Cheers,
> > Dr. D
> >
> > At 03:04 PM 5/24/2011, Richard Brous wrote:
> >> Hi Dondi/Dr. D,
> >>
> >> My focus is starting to return to GM Builder after I was able to get
> >> through the pile of stuff I had waiting for me at the start of summer
> break.
> >>
> >> So here is the current status:
> >>
> >> 1. Emailed Dr. Dorin to discuss options on how this next session
> >> might fit into my curriculum requirements now that I have finished
> >> all my upper division CS electives. Will fill you in once he and I
> discuss etc.
> >>
> >> 2. Spent some time cleaning out the old commented code and compiling
> >> the software to make sure I haven't broken anything. Commited the
> >> changes up to SourceForge after my testing.
> >>
> >>
> ----------------------------------------------------------------------------------------------------------------------------------------
> >>
> >> So I know we discussed next steps but before I move forward we
> >> should probably have a con call to ensure sync. Mondays aren't good
> >> for me anymore but Tues - Thurs all work atm.
> >>
> >> Lets figure out which day is most convenient and schedule the weekly
> >> call. What works for you guys?
> >>
> >> Richard
> >>
> >>
> >>
> >
> >
> >
> ------------------------------------------------------------------------------
> > vRanger cuts backup time in half-while increasing security.
> > With the market-leading solution for virtual backup and recovery,
> > you get blazing-fast, flexible, and affordable data protection.
> > Download your free trial now.
> > http://p.sf.net/sfu/quest-d2dcopy1
> > _______________________________________________
> > xmlpipedb-developer mailing list
> > xml...@li...
> > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer
>
>
>
> ------------------------------------------------------------------------------
> vRanger cuts backup time in half-while increasing security.
> With the market-leading solution for virtual backup and recovery,
> you get blazing-fast, flexible, and affordable data protection.
> Download your free trial now.
> http://p.sf.net/sfu/quest-d2dcopy1
> _______________________________________________
> xmlpipedb-developer mailing list
> xml...@li...
> https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer
>
|
|
From: Kam D. <kda...@lm...> - 2011-05-27 00:32:54
|
Hi Rich, Next Wednesday at 10 works for me and Dondi, and will probably work every week, but we can confirm when we get on the phone. How are we going to do the call? Dondi has to be at home and I will be at work at that time. We can use the free conference call system that we used before, but it is a long-distance number. Best, Dr. D At 09:42 AM 5/26/2011, Richard Brous wrote: >I'll suggest Wednesdays at 10am for a weekly call? > >A back and forth with Dr. Dorin to discuss where to fit the ongoing >work into my degree requirements is underway at the moment. > >Here is the list of enhancements from my end of semester paper: > >PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS > * After a clarifying discussion with Dr. Dahlquist, it seems > that based on customer need and overall feature direction, that > multiple species exports should be the highest priority going > forward. Based on this fact, I submit the below list in priority > order for discussion. > * Baseline check against balance of species > * Ms, Mt, Pf(source taxon issue), Pa, and Sa have been > successfully exported post merge > * Some amount of commented code cleanup left in generic species, > UniProt profile, and overall name2taxon implementation. Also > cleanup of non commented constructor and methods referencing species name. > * Multi-Species export functionality > * pick up where Don left off regarding GO data > * includes re-factor export wizard > * TallyEngine queries > * Data snapshot functionality when linked to different files: > * Link to XML source - surface to user the taxon id's > contained within > * Query and return the species with taxon id which currently > reside within a Postgres database > * Return species with taxon id contained within a multi-species gdb > * Finish Yeast database >RB > >On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio ><<mailto:do...@lm...>do...@lm...> wrote: >Yes, this week is grant-proposal-deadline-week for us, but it does >give you some time with checking on your curriculum status and >reviewing the code as you last left it. I also have a meeting at >noon on Tuesday, so in a sense that works out; before that meeting, >say 10 or 11, will work better for me than after it. > >John David N. Dionisio, PhD >Associate Professor, Computer Science >Loyola Marymount University > > >On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: > > > Hi, > > > > We have a grant due Thursday, so we're pretty focused on working on > > that right now, so a call probably won't work for us this week. > > > > I'm also flexible on call times, I just need to know when. Next week > > on Tuesday I have a meeting between 12-2:30, but any other time will work. > > > > Cheers, > > Dr. D > > > > At 03:04 PM 5/24/2011, Richard Brous wrote: > >> Hi Dondi/Dr. D, > >> > >> My focus is starting to return to GM Builder after I was able to get > >> through the pile of stuff I had waiting for me at the start of > summer break. > >> > >> So here is the current status: > >> > >> 1. Emailed Dr. Dorin to discuss options on how this next session > >> might fit into my curriculum requirements now that I have finished > >> all my upper division CS electives. Will fill you in once he and > I discuss etc. > >> > >> 2. Spent some time cleaning out the old commented code and compiling > >> the software to make sure I haven't broken anything. Commited the > >> changes up to SourceForge after my testing. > >> > >> > ---------------------------------------------------------------------------------------------------------------------------------------- > >> > >> So I know we discussed next steps but before I move forward we > >> should probably have a con call to ensure sync. Mondays aren't good > >> for me anymore but Tues - Thurs all work atm. > >> > >> Lets figure out which day is most convenient and schedule the weekly > >> call. What works for you guys? > >> > >> Richard > >> > >> > >> > > > > > > > ------------------------------------------------------------------------------ > > vRanger cuts backup time in half-while increasing security. > > With the market-leading solution for virtual backup and recovery, > > you get blazing-fast, flexible, and affordable data protection. > > Download your free trial now. > > <http://p.sf.net/sfu/quest-d2dcopy1>http://p.sf.net/sfu/quest-d2dcopy1 > > _______________________________________________ > > xmlpipedb-developer mailing list > > > <mailto:xml...@li...>xml...@li... > > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > >------------------------------------------------------------------------------ >vRanger cuts backup time in half-while increasing security. >With the market-leading solution for virtual backup and recovery, >you get blazing-fast, flexible, and affordable data protection. >Download your free trial now. ><http://p.sf.net/sfu/quest-d2dcopy1>http://p.sf.net/sfu/quest-d2dcopy1 >_______________________________________________ >xmlpipedb-developer mailing list ><mailto:xml...@li...>xml...@li... >https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > > |
|
From: Richard B. <rbr...@gm...> - 2011-05-31 16:58:22
|
OK, lets try this con call service with a CA dialing number for the call using the below info. Talk to you 10am tomorrow. rb [image: Rondee] <http://www.rondee.com/> > > Welcome to Rondee! You're now all set to go. Please see your On Demand > dial-in number and PIN in the green box below. > Your dial-in number: *(916) 209-4534* > > Alternative dial-in: (619) 276-6333 > > On Demand PIN for you and your participants: 7387949 > > You are now ready to start using Rondee! Just give your participants the > dial-number and PIN and let them know when to call in. > > ** > On Thu, May 26, 2011 at 5:32 PM, Kam Dahlquist <kda...@lm...> wrote: > Hi Rich, > > Next Wednesday at 10 works for me and Dondi, and will probably work every > week, but we can confirm when we get on the phone. > > How are we going to do the call? Dondi has to be at home and I will be at > work at that time. We can use the free conference call system that we used > before, but it is a long-distance number. > > Best, > Dr. D > > > At 09:42 AM 5/26/2011, Richard Brous wrote: > > I'll suggest Wednesdays at 10am for a weekly call? > > A back and forth with Dr. Dorin to discuss where to fit the ongoing work > into my degree requirements is underway at the moment. > > Here is the list of enhancements from my end of semester paper: > > PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS > > - After a clarifying discussion with Dr. Dahlquist, it seems that based > on customer need and overall feature direction, that multiple species > exports should be the highest priority going forward. Based on this fact, I > submit the below list in priority order for discussion. > - Baseline check against balance of species > - Ms, Mt, Pf(source taxon issue), Pa, and Sa have been successfully > exported post merge > - Some amount of commented code cleanup left in generic species, > UniProt profile, and overall name2taxon implementation. Also cleanup of non > commented constructor and methods referencing species name. > - Multi-Species export functionality > - pick up where Don left off regarding GO data > - includes re-factor export wizard > > TallyEngine queries > Data snapshot functionality when linked to different files: > > - Link to XML source - surface to user the taxon id's contained within > - Query and return the species with taxon id which currently reside > within a Postgres database > - Return species with taxon id contained within a multi-species gdb > > > > Finish Yeast database > > > RB > > On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio <do...@lm...> > wrote: > Yes, this week is grant-proposal-deadline-week for us, but it does give > you some time with checking on your curriculum status and reviewing the code > as you last left it. I also have a meeting at noon on Tuesday, so in a > sense that works out; before that meeting, say 10 or 11, will work better > for me than after it. > > John David N. Dionisio, PhD > Associate Professor, Computer Science > Loyola Marymount University > > > On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: > > > Hi, > > > > We have a grant due Thursday, so we're pretty focused on working on > > that right now, so a call probably won't work for us this week. > > > > I'm also flexible on call times, I just need to know when. Next week > > on Tuesday I have a meeting between 12-2:30, but any other time will > work. > > > > Cheers, > > Dr. D > > > > At 03:04 PM 5/24/2011, Richard Brous wrote: > >> Hi Dondi/Dr. D, > >> > >> My focus is starting to return to GM Builder after I was able to get > >> through the pile of stuff I had waiting for me at the start of summer > break. > >> > >> So here is the current status: > >> > >> 1. Emailed Dr. Dorin to discuss options on how this next session > >> might fit into my curriculum requirements now that I have finished > >> all my upper division CS electives. Will fill you in once he and I > discuss etc. > >> > >> 2. Spent some time cleaning out the old commented code and compiling > >> the software to make sure I haven't broken anything. Commited the > >> changes up to SourceForge after my testing. > >> > >> > ---------------------------------------------------------------------------------------------------------------------------------------- > >> > >> So I know we discussed next steps but before I move forward we > >> should probably have a con call to ensure sync. Mondays aren't good > >> for me anymore but Tues - Thurs all work atm. > >> > >> Lets figure out which day is most convenient and schedule the weekly > >> call. What works for you guys? > >> > >> Richard > >> > >> > >> > > > > > > > ------------------------------------------------------------------------------ > > vRanger cuts backup time in half-while increasing security. > > With the market-leading solution for virtual backup and recovery, > > you get blazing-fast, flexible, and affordable data protection. > > Download your free trial now. > > http://p.sf.net/sfu/quest-d2dcopy1 > > _______________________________________________ > > xmlpipedb-developer mailing list > > xml...@li... > > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > > > ------------------------------------------------------------------------------ > vRanger cuts backup time in half-while increasing security. > With the market-leading solution for virtual backup and recovery, > you get blazing-fast, flexible, and affordable data protection. > Download your free trial now. > http://p.sf.net/sfu/quest-d2dcopy1 > _______________________________________________ > xmlpipedb-developer mailing list > xml...@li... > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > > > > > ------------------------------------------------------------------------------ > vRanger cuts backup time in half-while increasing security. > With the market-leading solution for virtual backup and recovery, > you get blazing-fast, flexible, and affordable data protection. > Download your free trial now. > http://p.sf.net/sfu/quest-d2dcopy1 > _______________________________________________ > xmlpipedb-developer mailing list > xml...@li... > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > |
|
From: John D. N. D. <do...@lm...> - 2011-05-31 18:59:46
|
OK, got that. Just to confirm --- you're the one initiating this call, with Dr. Dahlquist and me as participants, yes? Talk to you Wednesday at 10am then. John David N. Dionisio, PhD Associate Professor, Computer Science Loyola Marymount University On May 31, 2011, at 9:58 AM, Richard Brous wrote: > OK, lets try this con call service with a CA dialing number for the call using the below info. > > Talk to you 10am tomorrow. > > rb > > > > Welcome to Rondee! You're now all set to go. Please see your On Demand dial-in number and PIN in the green box below. > > Your dial-in number: (916) 209-4534 > > Alternative dial-in: (619) 276-6333 > > On Demand PIN for you and your participants: 7387949 > > You are now ready to start using Rondee! Just give your participants the dial-number and PIN and let them know when to call in. > > > > > On Thu, May 26, 2011 at 5:32 PM, Kam Dahlquist <kda...@lm...> wrote: > Hi Rich, > > Next Wednesday at 10 works for me and Dondi, and will probably work every week, but we can confirm when we get on the phone. > > How are we going to do the call? Dondi has to be at home and I will be at work at that time. We can use the free conference call system that we used before, but it is a long-distance number. > > Best, > Dr. D > > > At 09:42 AM 5/26/2011, Richard Brous wrote: >> I'll suggest Wednesdays at 10am for a weekly call? >> >> A back and forth with Dr. Dorin to discuss where to fit the ongoing work into my degree requirements is underway at the moment. >> >> Here is the list of enhancements from my end of semester paper: >> >> PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS >> • After a clarifying discussion with Dr. Dahlquist, it seems that based on customer need and overall feature direction, that multiple species exports should be the highest priority going forward. Based on this fact, I submit the below list in priority order for discussion. >> • Baseline check against balance of species >> • Ms, Mt, Pf(source taxon issue), Pa, and Sa have been successfully exported post merge >> • Some amount of commented code cleanup left in generic species, UniProt profile, and overall name2taxon implementation. Also cleanup of non commented constructor and methods referencing species name. >> • Multi-Species export functionality >> • pick up where Don left off regarding GO data >> • includes re-factor export wizard >> • TallyEngine queries >> • Data snapshot functionality when linked to different files: >> • Link to XML source - surface to user the taxon id's contained within >> • Query and return the species with taxon id which currently reside within a Postgres database >> • Return species with taxon id contained within a multi-species gdb >> • Finish Yeast database >> RB >> >> On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio <do...@lm...> wrote: >> Yes, this week is grant-proposal-deadline-week for us, but it does give you some time with checking on your curriculum status and reviewing the code as you last left it. I also have a meeting at noon on Tuesday, so in a sense that works out; before that meeting, say 10 or 11, will work better for me than after it. >> >> John David N. Dionisio, PhD >> Associate Professor, Computer Science >> Loyola Marymount University >> >> >> On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: >> >> > Hi, >> > >> > We have a grant due Thursday, so we're pretty focused on working on >> > that right now, so a call probably won't work for us this week. >> > >> > I'm also flexible on call times, I just need to know when. Next week >> > on Tuesday I have a meeting between 12-2:30, but any other time will work. >> > >> > Cheers, >> > Dr. D >> > >> > At 03:04 PM 5/24/2011, Richard Brous wrote: >> >> Hi Dondi/Dr. D, >> >> >> >> My focus is starting to return to GM Builder after I was able to get >> >> through the pile of stuff I had waiting for me at the start of summer break. >> >> >> >> So here is the current status: >> >> >> >> 1. Emailed Dr. Dorin to discuss options on how this next session >> >> might fit into my curriculum requirements now that I have finished >> >> all my upper division CS electives. Will fill you in once he and I discuss etc. >> >> >> >> 2. Spent some time cleaning out the old commented code and compiling >> >> the software to make sure I haven't broken anything. Commited the >> >> changes up to SourceForge after my testing. >> >> >> >> ---------------------------------------------------------------------------------------------------------------------------------------- >> >> >> >> So I know we discussed next steps but before I move forward we >> >> should probably have a con call to ensure sync. Mondays aren't good >> >> for me anymore but Tues - Thurs all work atm. >> >> >> >> Lets figure out which day is most convenient and schedule the weekly >> >> call. What works for you guys? >> >> >> >> Richard >> >> >> >> >> >> >> > >> > >> > ------------------------------------------------------------------------------ >> > vRanger cuts backup time in half-while increasing security. >> > With the market-leading solution for virtual backup and recovery, >> > you get blazing-fast, flexible, and affordable data protection. >> > Download your free trial now. >> > http://p.sf.net/sfu/quest-d2dcopy1 >> > _______________________________________________ >> > xmlpipedb-developer mailing list >> > xml...@li... >> > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> >> >> ------------------------------------------------------------------------------ >> vRanger cuts backup time in half-while increasing security. >> With the market-leading solution for virtual backup and recovery, >> you get blazing-fast, flexible, and affordable data protection. >> Download your free trial now. >> http://p.sf.net/sfu/quest-d2dcopy1 >> _______________________________________________ >> xmlpipedb-developer mailing list >> xml...@li... >> https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> >> >> > > ------------------------------------------------------------------------------ > vRanger cuts backup time in half-while increasing security. > With the market-leading solution for virtual backup and recovery, > you get blazing-fast, flexible, and affordable data protection. > Download your free trial now. > http://p.sf.net/sfu/quest-d2dcopy1 > _______________________________________________ > xmlpipedb-developer mailing list > xml...@li... > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > > <ATT00001..txt><ATT00002..txt> |
|
From: Richard B. <rbr...@gm...> - 2011-05-31 19:25:17
|
I'm not sure anyone specific needs to initiate the call but i'll get on a few minutes early and log in jic. rb On Tue, May 31, 2011 at 11:59 AM, John David N. Dionisio <do...@lm...>wrote: > OK, got that. Just to confirm --- you're the one initiating this call, > with Dr. Dahlquist and me as participants, yes? > > Talk to you Wednesday at 10am then. > > John David N. Dionisio, PhD > Associate Professor, Computer Science > Loyola Marymount University > > > > On May 31, 2011, at 9:58 AM, Richard Brous wrote: > > > OK, lets try this con call service with a CA dialing number for the call > using the below info. > > > > Talk to you 10am tomorrow. > > > > rb > > > > > > > > Welcome to Rondee! You're now all set to go. Please see your On Demand > dial-in number and PIN in the green box below. > > > > Your dial-in number: (916) 209-4534 > > > > Alternative dial-in: (619) 276-6333 > > > > On Demand PIN for you and your participants: 7387949 > > > > You are now ready to start using Rondee! Just give your participants the > dial-number and PIN and let them know when to call in. > > > > > > > > > > On Thu, May 26, 2011 at 5:32 PM, Kam Dahlquist <kda...@lm...> > wrote: > > Hi Rich, > > > > Next Wednesday at 10 works for me and Dondi, and will probably work every > week, but we can confirm when we get on the phone. > > > > How are we going to do the call? Dondi has to be at home and I will be > at work at that time. We can use the free conference call system that we > used before, but it is a long-distance number. > > > > Best, > > Dr. D > > > > > > At 09:42 AM 5/26/2011, Richard Brous wrote: > >> I'll suggest Wednesdays at 10am for a weekly call? > >> > >> A back and forth with Dr. Dorin to discuss where to fit the ongoing work > into my degree requirements is underway at the moment. > >> > >> Here is the list of enhancements from my end of semester paper: > >> > >> PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS > >> • After a clarifying discussion with Dr. Dahlquist, it seems that > based on customer need and overall feature direction, that multiple species > exports should be the highest priority going forward. Based on this fact, I > submit the below list in priority order for discussion. > >> • Baseline check against balance of species > >> • Ms, Mt, Pf(source taxon issue), Pa, and Sa have been > successfully exported post merge > >> • Some amount of commented code cleanup left in generic species, > UniProt profile, and overall name2taxon implementation. Also cleanup of non > commented constructor and methods referencing species name. > >> • Multi-Species export functionality > >> • pick up where Don left off regarding GO data > >> • includes re-factor export wizard > >> • TallyEngine queries > >> • Data snapshot functionality when linked to different files: > >> • Link to XML source - surface to user the taxon id's contained > within > >> • Query and return the species with taxon id which currently reside > within a Postgres database > >> • Return species with taxon id contained within a multi-species gdb > >> • Finish Yeast database > >> RB > >> > >> On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio <do...@lm...> > wrote: > >> Yes, this week is grant-proposal-deadline-week for us, but it does give > you some time with checking on your curriculum status and reviewing the code > as you last left it. I also have a meeting at noon on Tuesday, so in a > sense that works out; before that meeting, say 10 or 11, will work better > for me than after it. > >> > >> John David N. Dionisio, PhD > >> Associate Professor, Computer Science > >> Loyola Marymount University > >> > >> > >> On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: > >> > >> > Hi, > >> > > >> > We have a grant due Thursday, so we're pretty focused on working on > >> > that right now, so a call probably won't work for us this week. > >> > > >> > I'm also flexible on call times, I just need to know when. Next week > >> > on Tuesday I have a meeting between 12-2:30, but any other time will > work. > >> > > >> > Cheers, > >> > Dr. D > >> > > >> > At 03:04 PM 5/24/2011, Richard Brous wrote: > >> >> Hi Dondi/Dr. D, > >> >> > >> >> My focus is starting to return to GM Builder after I was able to get > >> >> through the pile of stuff I had waiting for me at the start of summer > break. > >> >> > >> >> So here is the current status: > >> >> > >> >> 1. Emailed Dr. Dorin to discuss options on how this next session > >> >> might fit into my curriculum requirements now that I have finished > >> >> all my upper division CS electives. Will fill you in once he and I > discuss etc. > >> >> > >> >> 2. Spent some time cleaning out the old commented code and compiling > >> >> the software to make sure I haven't broken anything. Commited the > >> >> changes up to SourceForge after my testing. > >> >> > >> >> > ---------------------------------------------------------------------------------------------------------------------------------------- > >> >> > >> >> So I know we discussed next steps but before I move forward we > >> >> should probably have a con call to ensure sync. Mondays aren't good > >> >> for me anymore but Tues - Thurs all work atm. > >> >> > >> >> Lets figure out which day is most convenient and schedule the weekly > >> >> call. What works for you guys? > >> >> > >> >> Richard > >> >> > >> >> > >> >> > >> > > >> > > >> > > ------------------------------------------------------------------------------ > >> > vRanger cuts backup time in half-while increasing security. > >> > With the market-leading solution for virtual backup and recovery, > >> > you get blazing-fast, flexible, and affordable data protection. > >> > Download your free trial now. > >> > http://p.sf.net/sfu/quest-d2dcopy1 > >> > _______________________________________________ > >> > xmlpipedb-developer mailing list > >> > xml...@li... > >> > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > >> > >> > >> > ------------------------------------------------------------------------------ > >> vRanger cuts backup time in half-while increasing security. > >> With the market-leading solution for virtual backup and recovery, > >> you get blazing-fast, flexible, and affordable data protection. > >> Download your free trial now. > >> http://p.sf.net/sfu/quest-d2dcopy1 > >> _______________________________________________ > >> xmlpipedb-developer mailing list > >> xml...@li... > >> https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > >> > >> > >> > > > > > ------------------------------------------------------------------------------ > > vRanger cuts backup time in half-while increasing security. > > With the market-leading solution for virtual backup and recovery, > > you get blazing-fast, flexible, and affordable data protection. > > Download your free trial now. > > http://p.sf.net/sfu/quest-d2dcopy1 > > _______________________________________________ > > xmlpipedb-developer mailing list > > xml...@li... > > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > > > > > > <ATT00001..txt><ATT00002..txt> > > > > ------------------------------------------------------------------------------ > Simplify data backup and recovery for your virtual environment with > vRanger. > Installation's a snap, and flexible recovery options mean your data is > safe, > secure and there when you need it. Data protection magic? > Nope - It's vRanger. Get your free trial download today. > http://p.sf.net/sfu/quest-sfdev2dev > _______________________________________________ > xmlpipedb-developer mailing list > xml...@li... > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer > |
|
From: Richard B. <rbr...@gm...> - 2011-06-01 17:00:54
|
I'm in the conf call but it seems to be running very slowly, eventually the voice prompt told me to enter the PIN #. rb On Tue, May 31, 2011 at 12:25 PM, Richard Brous <rbr...@gm...> wrote: > I'm not sure anyone specific needs to initiate the call but i'll get on a > few minutes early and log in jic. > > rb > > On Tue, May 31, 2011 at 11:59 AM, John David N. Dionisio <do...@lm...>wrote: > >> OK, got that. Just to confirm --- you're the one initiating this call, >> with Dr. Dahlquist and me as participants, yes? >> >> Talk to you Wednesday at 10am then. >> >> John David N. Dionisio, PhD >> Associate Professor, Computer Science >> Loyola Marymount University >> >> >> >> On May 31, 2011, at 9:58 AM, Richard Brous wrote: >> >> > OK, lets try this con call service with a CA dialing number for the call >> using the below info. >> > >> > Talk to you 10am tomorrow. >> > >> > rb >> > >> > >> > >> > Welcome to Rondee! You're now all set to go. Please see your On Demand >> dial-in number and PIN in the green box below. >> > >> > Your dial-in number: (916) 209-4534 >> > >> > Alternative dial-in: (619) 276-6333 >> > >> > On Demand PIN for you and your participants: 7387949 >> > >> > You are now ready to start using Rondee! Just give your participants the >> dial-number and PIN and let them know when to call in. >> > >> > >> > >> > >> > On Thu, May 26, 2011 at 5:32 PM, Kam Dahlquist <kda...@lm...> >> wrote: >> > Hi Rich, >> > >> > Next Wednesday at 10 works for me and Dondi, and will probably work >> every week, but we can confirm when we get on the phone. >> > >> > How are we going to do the call? Dondi has to be at home and I will be >> at work at that time. We can use the free conference call system that we >> used before, but it is a long-distance number. >> > >> > Best, >> > Dr. D >> > >> > >> > At 09:42 AM 5/26/2011, Richard Brous wrote: >> >> I'll suggest Wednesdays at 10am for a weekly call? >> >> >> >> A back and forth with Dr. Dorin to discuss where to fit the ongoing >> work into my degree requirements is underway at the moment. >> >> >> >> Here is the list of enhancements from my end of semester paper: >> >> >> >> PRIORITY OF FUTURE FEATURES AND ENHANCEMENTS >> >> • After a clarifying discussion with Dr. Dahlquist, it seems that >> based on customer need and overall feature direction, that multiple species >> exports should be the highest priority going forward. Based on this fact, I >> submit the below list in priority order for discussion. >> >> • Baseline check against balance of species >> >> • Ms, Mt, Pf(source taxon issue), Pa, and Sa have been >> successfully exported post merge >> >> • Some amount of commented code cleanup left in generic species, >> UniProt profile, and overall name2taxon implementation. Also cleanup of non >> commented constructor and methods referencing species name. >> >> • Multi-Species export functionality >> >> • pick up where Don left off regarding GO data >> >> • includes re-factor export wizard >> >> • TallyEngine queries >> >> • Data snapshot functionality when linked to different files: >> >> • Link to XML source - surface to user the taxon id's contained >> within >> >> • Query and return the species with taxon id which currently >> reside within a Postgres database >> >> • Return species with taxon id contained within a multi-species >> gdb >> >> • Finish Yeast database >> >> RB >> >> >> >> On Tue, May 24, 2011 at 4:08 PM, John David N. Dionisio <do...@lm...> >> wrote: >> >> Yes, this week is grant-proposal-deadline-week for us, but it does give >> you some time with checking on your curriculum status and reviewing the code >> as you last left it. I also have a meeting at noon on Tuesday, so in a >> sense that works out; before that meeting, say 10 or 11, will work better >> for me than after it. >> >> >> >> John David N. Dionisio, PhD >> >> Associate Professor, Computer Science >> >> Loyola Marymount University >> >> >> >> >> >> On May 24, 2011, at 3:28 PM, Kam Dahlquist wrote: >> >> >> >> > Hi, >> >> > >> >> > We have a grant due Thursday, so we're pretty focused on working on >> >> > that right now, so a call probably won't work for us this week. >> >> > >> >> > I'm also flexible on call times, I just need to know when. Next week >> >> > on Tuesday I have a meeting between 12-2:30, but any other time will >> work. >> >> > >> >> > Cheers, >> >> > Dr. D >> >> > >> >> > At 03:04 PM 5/24/2011, Richard Brous wrote: >> >> >> Hi Dondi/Dr. D, >> >> >> >> >> >> My focus is starting to return to GM Builder after I was able to get >> >> >> through the pile of stuff I had waiting for me at the start of >> summer break. >> >> >> >> >> >> So here is the current status: >> >> >> >> >> >> 1. Emailed Dr. Dorin to discuss options on how this next session >> >> >> might fit into my curriculum requirements now that I have finished >> >> >> all my upper division CS electives. Will fill you in once he and I >> discuss etc. >> >> >> >> >> >> 2. Spent some time cleaning out the old commented code and compiling >> >> >> the software to make sure I haven't broken anything. Commited the >> >> >> changes up to SourceForge after my testing. >> >> >> >> >> >> >> ---------------------------------------------------------------------------------------------------------------------------------------- >> >> >> >> >> >> So I know we discussed next steps but before I move forward we >> >> >> should probably have a con call to ensure sync. Mondays aren't good >> >> >> for me anymore but Tues - Thurs all work atm. >> >> >> >> >> >> Lets figure out which day is most convenient and schedule the weekly >> >> >> call. What works for you guys? >> >> >> >> >> >> Richard >> >> >> >> >> >> >> >> >> >> >> > >> >> > >> >> > >> ------------------------------------------------------------------------------ >> >> > vRanger cuts backup time in half-while increasing security. >> >> > With the market-leading solution for virtual backup and recovery, >> >> > you get blazing-fast, flexible, and affordable data protection. >> >> > Download your free trial now. >> >> > http://p.sf.net/sfu/quest-d2dcopy1 >> >> > _______________________________________________ >> >> > xmlpipedb-developer mailing list >> >> > xml...@li... >> >> > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> >> >> >> >> >> >> ------------------------------------------------------------------------------ >> >> vRanger cuts backup time in half-while increasing security. >> >> With the market-leading solution for virtual backup and recovery, >> >> you get blazing-fast, flexible, and affordable data protection. >> >> Download your free trial now. >> >> http://p.sf.net/sfu/quest-d2dcopy1 >> >> _______________________________________________ >> >> xmlpipedb-developer mailing list >> >> xml...@li... >> >> https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> >> >> >> >> >> >> > >> > >> ------------------------------------------------------------------------------ >> > vRanger cuts backup time in half-while increasing security. >> > With the market-leading solution for virtual backup and recovery, >> > you get blazing-fast, flexible, and affordable data protection. >> > Download your free trial now. >> > http://p.sf.net/sfu/quest-d2dcopy1 >> > _______________________________________________ >> > xmlpipedb-developer mailing list >> > xml...@li... >> > https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> > >> > >> > <ATT00001..txt><ATT00002..txt> >> >> >> >> ------------------------------------------------------------------------------ >> Simplify data backup and recovery for your virtual environment with >> vRanger. >> Installation's a snap, and flexible recovery options mean your data is >> safe, >> secure and there when you need it. Data protection magic? >> Nope - It's vRanger. Get your free trial download today. >> http://p.sf.net/sfu/quest-sfdev2dev >> _______________________________________________ >> xmlpipedb-developer mailing list >> xml...@li... >> https://lists.sourceforge.net/lists/listinfo/xmlpipedb-developer >> > > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X