xml1-wire-devel

[Xml1-wire-devel] Example source code.

[Brian D. H. <bri...@da...>]

I am in need of some assistance...

I have downloaded the sample code from Sourceforge.

I have also downloaded ANT and TINIANT from 
their respective sites, and was able to 
build the package.  Plus, I have the Systronics 
8 1-WIRE I/O board with which to test the code.

However, I have been unable to produce a *.tini 
or runnable *.class file utilizing the *.dtd and 
the example XML file located on the site.

I was wondering if someone could point me in the 
right direction or provide a few pointers...

Thanks,
--Brian Hindman,
Dallas Semiconductor.

Re: [Xml1-wire-devel] Example source code.

[Sean K. <ke...@ad...>]

> However, I have been unable to produce a *.tini 
> or runnable *.class file utilizing the *.dtd and 
> the example XML file located on the site.

What error messages, if any, are you seeing?

--Sean

RE: [Xml1-wire-devel] Example source code.

[Brian D. H. <bri...@da...>]

Sean,

Hi.  I don't get any error messages...

Everything seems to build, but no *.tini is made.  My output 
can be found below...

Should I just attempt to run the testerParser.class with 
input parameter of 8x1.XML file?

Where should MinML.jar be placed?

Regards,
--Brian H.
P.S.  I will be out of the office until Monday.  I'll let you 
know my progress then...

======================Output=======================================
D:\Work\XMLTagging\InterestGroup\xml1-wire>ant -Dtini.dir=D:\download\tini\tini1
.02
Buildfile: build.xml

prepBuild:
    [mkdir] Created dir: D:\Work\XMLTagging\InterestGroup\xml1-wire\build

compile:
    [javac] Compiling 13 source files to D:\Work\XMLTagging\InterestGroup\xml1-w
ire\build

copyResources:

build:

BUILD SUCCESSFUL

Total time: 6 seconds
===============================================================


> -----Original Message-----
> From: xml...@li...
> [mailto:xml...@li...]On Behalf Of Sean
> Kelly
> Sent: Thursday, March 29, 2001 5:38 PM
> To: Brian D. Hindman; XML1-Wire
> Subject: Re: [Xml1-wire-devel] Example source code.
> 
> 
> > However, I have been unable to produce a *.tini 
> > or runnable *.class file utilizing the *.dtd and 
> > the example XML file located on the site.
> 
> What error messages, if any, are you seeing?
> 
> --Sean
> 
> 
> 
> _______________________________________________
> Xml1-wire-devel mailing list
> Xml...@li...
> http://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
> 

Re: [Xml1-wire-devel] Example source code.

[Sean K. <ke...@ad...>]

Got it.

When you run ant with no arguments, by default you get
compilation for execution on your local system.  Run
ant and pass the "tini" argument:

> ant -Dtini.dir=d:\download\tini\tini1.02 tini

and you'll get a build for execution on a TINI.

Take care.
--k

RE: [Xml1-wire-devel] Example source code.

[Brian D. H. <bri...@da...>]

Sean,

I'm still having some difficulty.

Now, I get an error message that it can't 
find "BuildOneWireDependency" class.

I think I fixed the above with a 
"classpath" attribute in the Build file.

However, then it gave an error message that 
it couldn't find the TINIConvertor class.

Any ideas?

Thanks,
--Brian Hindman,
Dallas Semiconductor.

> -----Original Message-----
> From: xml...@li...
> [mailto:xml...@li...]On Behalf Of Sean
> Kelly
> Sent: Thursday, March 29, 2001 6:47 PM
> To: Brian D. Hindman; XML1-Wire
> Subject: Re: [Xml1-wire-devel] Example source code.
> 
> 
> Got it.
> 
> When you run ant with no arguments, by default you get
> compilation for execution on your local system.  Run
> ant and pass the "tini" argument:
> 
> > ant -Dtini.dir=d:\download\tini\tini1.02 tini
> 
> and you'll get a build for execution on a TINI.
> 
> Take care.
> --k
> 
> 
> _______________________________________________
> Xml1-wire-devel mailing list
> Xml...@li...
> http://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
> 

Re: [Xml1-wire-devel] Example source code.

[Sean K. <ke...@ad...>]

> Now, I get an error message that it can't 
> find "BuildOneWireDependency" class.

Well, you can tell how recently we've worked
on XML 1-Wire Tagging, now can't you? :-)
As soon as I get copious spare time (hah!)
I'm planning on delving into tagging again
full steam ahead.

I've just checked in an updated build.xml
file to the CVS repository; I'm also attaching
it to this email message for your convenience.

Give it another go.

--Sean

[Xml1-wire-devel] Parsing but no blinking.

[Brian D. H. <bri...@da...>]

Sean Kelly,

Hi.  Thanks for the new build.xml file!  It allowed me 
to compile successfully to a *.tini file using Ant.

To test the 8x1.xml file, I am using the Systronix board 
(8 1-WIRE I/Os).  Using the iButton Viewer I discovered 
all 4 1-Wire Net addresses and put them in the xml file.  
But, when I ran the xml1wire.tini file, I just received 
a parse of the xml file (see output below).

I was under the impression that the code actually 
blinked the LEDs and buzzed the buzzer.  Do you have 
any idea what might be going on or what I might be doing 
wrong?  Would I need to use a newer version of MinML with 
RPC?

Thanks,
--Brian Hindman,
Dallas Semiconductor.

=======================================================

TINI /> java xml1wire.tini 8x1.xml
Start of document:
<OW:Cluster xmlns:OW="http://xml1-wire.sourceforge.net">
<OW:Description>
Systronix 8x1-wire board
</OW:Description>
<OW:Cluster>
<OW:Description>
Pushbuttons
</OW:Description>
<OW:Sensor accessMethod="AM_LEVEL_2406">
<OW:NetAddress>
FC00000018BC0112
</OW:NetAddress>
<OW:ChannelMask>
02
</OW:ChannelMask>
<OW:Description>
Push-Button 2
</OW:Description>
</OW:Sensor>
<OW:Sensor accessMethod="AM_LEVEL_2406">
<OW:NetAddress>
1400000018AE2912
</OW:NetAddress>
<OW:ChannelMask>
02
</OW:ChannelMask>
<OW:Description>
Push-Button 3
</OW:Description>
</OW:Sensor>
<OW:Sensor accessMethod="AM_LEVEL_2406">
<OW:NetAddress>
B700000018AE3212
</OW:NetAddress>
<OW:ChannelMask>
02
</OW:ChannelMask>
<OW:Description>
Push-Button 4
</OW:Description>
</OW:Sensor>
<OW:Sensor accessMethod="AM_LEVEL_2406">
<OW:NetAddress>
B200000018BC2A12
</OW:NetAddress>
<OW:ChannelMask>
02
</OW:ChannelMask>
<OW:Description>
Push-Button 1
</OW:Description>
</OW:Sensor>
</OW:Cluster>
<OW:Cluster>
<OW:Description>
LEDs
</OW:Description>
<OW:Actuator accessMethod="AM_SWITCH_2406">
<OW:NetAddress>
FC00000018BC0112
</OW:NetAddress>
<OW:ChannelMask>
01
</OW:ChannelMask>
<OW:Description>
LED2
</OW:Description>
</OW:Actuator>
<OW:Actuator accessMethod="AM_SWITCH_2406">
<OW:NetAddress>
1400000018AE2912
</OW:NetAddress>
<OW:ChannelMask>
01
</OW:ChannelMask>
<OW:Description>
LED3
</OW:Description>
</OW:Actuator>
<OW:Actuator accessMethod="AM_SWITCH_2406">
<OW:NetAddress>
B700000018AE3212
</OW:NetAddress>
<OW:ChannelMask>
01
</OW:ChannelMask>
<OW:Description>
LED4 AND BUZZER
</OW:Description>
</OW:Actuator>
<OW:Actuator accessMethod="AM_SWITCH_2406">
<OW:NetAddress>
B200000018BC2A12
</OW:NetAddress>
<OW:ChannelMask>
01
</OW:ChannelMask>
<OW:Description>
LED1
</OW:Description>
</OW:Actuator>
</OW:Cluster>
</OW:Cluster>
End of document.  

> -----Original Message-----
> From: xml...@li...
> [mailto:xml...@li...]On Behalf Of Sean
> Kelly
> Sent: Friday, April 06, 2001 6:55 PM
> To: Brian D. Hindman
> Cc: XML1-Wire
> Subject: Re: [Xml1-wire-devel] Example source code.
> 
> 
> > Now, I get an error message that it can't 
> > find "BuildOneWireDependency" class.
> 
> Well, you can tell how recently we've worked
> on XML 1-Wire Tagging, now can't you? :-)
> As soon as I get copious spare time (hah!)
> I'm planning on delving into tagging again
> full steam ahead.
> 
> I've just checked in an updated build.xml
> file to the CVS repository; I'm also attaching
> it to this email message for your convenience.
> 
> Give it another go.
> 
> --Sean
> 
> 
> 

Re: [Xml1-wire-devel] Parsing but no blinking.

[Sean K. <ke...@ad...>]

> But, when I ran the xml1wire.tini file, I just received 
> a parse of the xml file (see output below).

Right.  The Main class listed in build.xml,
net.sourceforge.xml1wire.Main, just dumps its parsed XML
input.

For a more interesting demo, see the file
parserTester.java, courtesy of Byron Appelt.

(You know, we really need to clean up the XML 1-wire
directory ... again time permitting (hah!))

--Sean

[Xml1-wire-devel] New take on XML 1-Wire Tagging

[David S. <dav...@da...>]

All

See Scott's announcement below.  This release contains
a XML 1-Wire solution.  It has some similar lineage to
the source forge project but goes off in a slightly 
different direction and is pretty fleshed out.  The 
XML files can be on the desktop filesystem or on the 
1-Wire devices themselves.  There is an application
that will automatically read these files and spawn
windows representing each sensor/actuator.

Dave  




An Alpha release of the Java OneWireAPI v1.00 is available for download on
the ftp site.  The file readme.txt details all new additions and the
procudures for installation.  A complete list of changes and bug fixes is
available in the file changes.txt.

Download (2.43mb):
ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00A.tgz

Readme only (34kb):
ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Areadme.txt

Changes only (31kb):
ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Achanges.txt

All the examples (the ones without GUIs) were built against the latest
version of the TINI SDK (version 1.02c) and a corresponding .tbin is
included.  Get the version 1.02c of the TINI SDK here:
ftp://ftp.dalsemi.com/pub/tini/tini1_02c.tgz

Paraphrased from the Readme, here's a list of what's new:

New OneWireContainers Added
- OneWireContainer22 for the DS1822, 1-Wire Digital Thermometer.
- OneWireContainer24 for the DS2415/DS1904, 1-Wire Real-Time Clock.
- OneWireContainer27 for the DS2417, 1-Wire Time Chip with Interrupt.

New Hygro iButton, HumidityContainer
- Application support for Humidity sensing devices, including the DS1910
Hygro iButton.  A demo is included.

New SHA Transaction API
-  High-level transaction architecture intended to ease the development of
custom secure applications.  Support for DS1961S (SHA EEPROM), DS1963S (SHA
NVRAM), and a DS1963S coprocessor is no longer required as it can be
simulated.

New 1-Wire XML Tagging
-  Framework and demo application for using XML stored directly on the
device to "tag" each device with grouping information.  GUI demo
applications are included for viewing and creating 1-Wire Tags.

New OpenCard support classes for Java iButton
- API to abstract communication with SmartCards and JavaCards like the Java
Powered iButton. (See http://www.opencard.org)


Enjoy!

--
Scott Hughes <sh...@da...>
AutoInf Engineer, Maxim/Dallas Semiconductor

Re: [Xml1-wire-devel] New take on XML 1-Wire Tagging

[Sean K. <ke...@ad...>]

Given the maturity of this tagging solution, and the
quiescence of our own project, I'd like to make a
motion to retire the XML 1-Wire Tagging project on
Source Forge.

> All
> 
> See Scott's announcement below.  This release contains
> a XML 1-Wire solution.  It has some similar lineage to
> the source forge project but goes off in a slightly 
> different direction and is pretty fleshed out.  The 
> XML files can be on the desktop filesystem or on the 
> 1-Wire devices themselves.  There is an application
> that will automatically read these files and spawn
> windows representing each sensor/actuator.
> 
> Dave  
> 
> 
> 
> 
> An Alpha release of the Java OneWireAPI v1.00 is available for download on
> the ftp site.  The file readme.txt details all new additions and the
> procudures for installation.  A complete list of changes and bug fixes is
> available in the file changes.txt.
> 
> Download (2.43mb):
> ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00A.tgz
> 
> Readme only (34kb):
> ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Areadme.txt
> 
> Changes only (31kb):
> ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Achanges.txt
> 
> All the examples (the ones without GUIs) were built against the latest
> version of the TINI SDK (version 1.02c) and a corresponding .tbin is
> included.  Get the version 1.02c of the TINI SDK here:
> ftp://ftp.dalsemi.com/pub/tini/tini1_02c.tgz
> 
> Paraphrased from the Readme, here's a list of what's new:
> 
> New OneWireContainers Added
> - OneWireContainer22 for the DS1822, 1-Wire Digital Thermometer.
> - OneWireContainer24 for the DS2415/DS1904, 1-Wire Real-Time Clock.
> - OneWireContainer27 for the DS2417, 1-Wire Time Chip with Interrupt.
> 
> New Hygro iButton, HumidityContainer
> - Application support for Humidity sensing devices, including the DS1910
> Hygro iButton.  A demo is included.
> 
> New SHA Transaction API
> -  High-level transaction architecture intended to ease the development of
> custom secure applications.  Support for DS1961S (SHA EEPROM), DS1963S (SHA
> NVRAM), and a DS1963S coprocessor is no longer required as it can be
> simulated.
> 
> New 1-Wire XML Tagging
> -  Framework and demo application for using XML stored directly on the
> device to "tag" each device with grouping information.  GUI demo
> applications are included for viewing and creating 1-Wire Tags.
> 
> New OpenCard support classes for Java iButton
> - API to abstract communication with SmartCards and JavaCards like the Java
> Powered iButton. (See http://www.opencard.org)
> 
> 
> Enjoy!
> 
> --
> Scott Hughes <sh...@da...>
> AutoInf Engineer, Maxim/Dallas Semiconductor
> 
> 
> _______________________________________________
> Xml1-wire-devel mailing list
> Xml...@li...
> https://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
> 

RE: [Xml1-wire-devel] New take on XML 1-Wire Tagging

[Brian D. H. <bri...@da...>]

Sean,

Hi.  As to your motion to retire the Source Forge XML Tagging project, we here at Dallas Semiconductor are still evaluating the
situation, so our official response is "We don't know yet"...

By the way, if you had any trouble downloading the 1-Wire Tagging document in PDF format (it came in the 1-Wire API for Java 1.00
Alpha release), we have extracted just the document and placed it on our FTP site here:
ftp://ftp.dalsemi.com/pub/auto_id/public/xmltag.pdf

Thanks,
--Brian Hindman,
Dallas Semiconductor.

> -----Original Message-----
> From: xml...@li...
> [mailto:xml...@li...]On Behalf Of Sean
> Kelly
> Sent: Monday, October 22, 2001 9:37 AM
> To: David Smiczek; XML1-Wire
> Subject: Re: [Xml1-wire-devel] New take on XML 1-Wire Tagging
>
>
> Given the maturity of this tagging solution, and the
> quiescence of our own project, I'd like to make a
> motion to retire the XML 1-Wire Tagging project on
> Source Forge.
>
> > All
> >
> > See Scott's announcement below.  This release contains
> > a XML 1-Wire solution.  It has some similar lineage to
> > the source forge project but goes off in a slightly
> > different direction and is pretty fleshed out.  The
> > XML files can be on the desktop filesystem or on the
> > 1-Wire devices themselves.  There is an application
> > that will automatically read these files and spawn
> > windows representing each sensor/actuator.
> >
> > Dave
> >
> >
> >
> >
> > An Alpha release of the Java OneWireAPI v1.00 is available for download on
> > the ftp site.  The file readme.txt details all new additions and the
> > procudures for installation.  A complete list of changes and bug fixes is
> > available in the file changes.txt.
> >
> > Download (2.43mb):
> > ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00A.tgz
> >
> > Readme only (34kb):
> > ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Areadme.txt
> >
> > Changes only (31kb):
> > ftp://ftp.dalsemi.com/pub/auto_id/public/owapi_1_00Achanges.txt
> >
> > All the examples (the ones without GUIs) were built against the latest
> > version of the TINI SDK (version 1.02c) and a corresponding .tbin is
> > included.  Get the version 1.02c of the TINI SDK here:
> > ftp://ftp.dalsemi.com/pub/tini/tini1_02c.tgz
> >
> > Paraphrased from the Readme, here's a list of what's new:
> >
> > New OneWireContainers Added
> > - OneWireContainer22 for the DS1822, 1-Wire Digital Thermometer.
> > - OneWireContainer24 for the DS2415/DS1904, 1-Wire Real-Time Clock.
> > - OneWireContainer27 for the DS2417, 1-Wire Time Chip with Interrupt.
> >
> > New Hygro iButton, HumidityContainer
> > - Application support for Humidity sensing devices, including the DS1910
> > Hygro iButton.  A demo is included.
> >
> > New SHA Transaction API
> > -  High-level transaction architecture intended to ease the development of
> > custom secure applications.  Support for DS1961S (SHA EEPROM), DS1963S (SHA
> > NVRAM), and a DS1963S coprocessor is no longer required as it can be
> > simulated.
> >
> > New 1-Wire XML Tagging
> > -  Framework and demo application for using XML stored directly on the
> > device to "tag" each device with grouping information.  GUI demo
> > applications are included for viewing and creating 1-Wire Tags.
> >
> > New OpenCard support classes for Java iButton
> > - API to abstract communication with SmartCards and JavaCards like the Java
> > Powered iButton. (See http://www.opencard.org)
> >
> >
> > Enjoy!
> >
> > --
> > Scott Hughes <sh...@da...>
> > AutoInf Engineer, Maxim/Dallas Semiconductor
> >
> >
> > _______________________________________________
> > Xml1-wire-devel mailing list
> > Xml...@li...
> > https://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
> >
>
>
> _______________________________________________
> Xml1-wire-devel mailing list
> Xml...@li...
> https://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
>

RE: [Xml1-wire-devel] Example source code.

[David S. <dav...@da...>]

Brian,

> Now, I get an error message that it can't 
> find "BuildOneWireDependency" class.

Do you have to build it for TINI.  Can't you just
use the PC version of the 1-Wire API to run this
example?

Dave


> -----Original Message-----
> From: xml...@li...
> [mailto:xml...@li...]On Behalf Of Brian
> D. Hindman
> Sent: Friday, April 06, 2001 6:22 PM
> To: Sean Kelly
> Cc: XML1-Wire
> Subject: RE: [Xml1-wire-devel] Example source code.
> 
> 
> Sean,
> 
> I'm still having some difficulty.
> 
> Now, I get an error message that it can't 
> find "BuildOneWireDependency" class.
> 
> I think I fixed the above with a 
> "classpath" attribute in the Build file.
> 
> However, then it gave an error message that 
> it couldn't find the TINIConvertor class.
> 
> Any ideas?
> 
> Thanks,
> --Brian Hindman,
> Dallas Semiconductor.
> 
> > -----Original Message-----
> > From: xml...@li...
> > [mailto:xml...@li...]On Behalf Of Sean
> > Kelly
> > Sent: Thursday, March 29, 2001 6:47 PM
> > To: Brian D. Hindman; XML1-Wire
> > Subject: Re: [Xml1-wire-devel] Example source code.
> > 
> > 
> > Got it.
> > 
> > When you run ant with no arguments, by default you get
> > compilation for execution on your local system.  Run
> > ant and pass the "tini" argument:
> > 
> > > ant -Dtini.dir=d:\download\tini\tini1.02 tini
> > 
> > and you'll get a build for execution on a TINI.
> > 
> > Take care.
> > --k
> > 
> > 
> > _______________________________________________
> > Xml1-wire-devel mailing list
> > Xml...@li...
> > http://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
> > 
> 
> _______________________________________________
> Xml1-wire-devel mailing list
> Xml...@li...
> http://lists.sourceforge.net/lists/listinfo/xml1-wire-devel
>