I cannot replicate your issue.
Please provide more information about the installation type (full / embedded). The information is shown on the home screen.
Did you import the disks and did you import the pool properly? Providing a screenshot from disks > management is a good starting point.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thanks for your information.
So, platform is x64-embedded.
There were no changes with the disks andthe ZFS pools since 12nd version of XigmaNAS and this problem occured only after updating to 14th version.
After rebooting the disks always existed in system, but the ZFS pool is not imported.
And one interesting thing - when I try to import the pool there is message that the last access to the pool was from another system (but there were only "shut down" and "power on").
According to your screenshots, all disks have been successfully imported.
After you imported the pool via the tools page with the 'Force Operation' option selected, the WebGUI must be made aware of the pool. To do that, please go to Disks > ZFS > Configuration > Synchronize, check all 3 options, click on button 'Synchronize'.
Last edit: ms49434 2024-06-26
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thank you.
I've I have followed your recommendations, but it still 50/50 whether the poll will be imported into system or not. And the error still the same - the pool was accessed last time by another system
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
For the zfs pool to be imported correctly on reboot you must first install from the live usb otherwise if it is from an upgrade it does not work when you reboot on an embedded installation, there remains the solution 'upgrade to the installed version from the liveusb so that the import goes well on reboot. This appeared between 10060 and 10068
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
So, now I see the next thing. If the pool is not imported into system and I try to impot it without force flag the system brings such message
"cannot import 'Storage': pool was previously in use from another system.
Last accessed by nas.local (hostid=f45d2f86) at Mon Aug 5 19:53:34 2024
The pool can be imported, use 'zpool import -f' to import the pool."
And the "hostid" is always different
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I cannot replicate your issue.
Please provide more information about the installation type (full / embedded). The information is shown on the home screen.
Did you import the disks and did you import the pool properly? Providing a screenshot from disks > management is a good starting point.
Thanks for your information.
So, platform is x64-embedded.
There were no changes with the disks andthe ZFS pools since 12nd version of XigmaNAS and this problem occured only after updating to 14th version.
After rebooting the disks always existed in system, but the ZFS pool is not imported.
And one interesting thing - when I try to import the pool there is message that the last access to the pool was from another system (but there were only "shut down" and "power on").
According to your screenshots, all disks have been successfully imported.
After you imported the pool via the tools page with the 'Force Operation' option selected, the WebGUI must be made aware of the pool. To do that, please go to Disks > ZFS > Configuration > Synchronize, check all 3 options, click on button 'Synchronize'.
Last edit: ms49434 2024-06-26
Thank you.
I've I have followed your recommendations, but it still 50/50 whether the poll will be imported into system or not. And the error still the same - the pool was accessed last time by another system
same for me
For the zfs pool to be imported correctly on reboot you must first install from the live usb otherwise if it is from an upgrade it does not work when you reboot on an embedded installation, there remains the solution 'upgrade to the installed version from the liveusb so that the import goes well on reboot. This appeared between 10060 and 10068
ms49434 install an embedded version from liveusb 10090, upgrade to 10101, then reboot the system you will see the problem
I had already done what you indicated, but with the next upgrade it happened again.
So, now I see the next thing. If the pool is not imported into system and I try to impot it without force flag the system brings such message
"cannot import 'Storage': pool was previously in use from another system.
Last accessed by nas.local (hostid=f45d2f86) at Mon Aug 5 19:53:34 2024
The pool can be imported, use 'zpool import -f' to import the pool."
And the "hostid" is always different