Hi everyone,
v6.48 is now available for download.
Please note that this may well be the last version of the application, since the development effort is now fully on flow5. Only major bugs, if any, will be corrected from now on.
André
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi!,
When I try to use the Stability Analysis's Initial Condition Response with the initial condition p0, q0 or r0=10 deg/sec, the coresponding graphs starts with 573 deg/sec.
I believe this is because of confusion between radian and degree.
Could you check and correct it?
Thanks,
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
No, I say about the "Initial Condition Response" not the "Forced Response".
For example, when I set the initial conditions for a longitudinal motion such as u0=w0=0 and q0=1.0 deg/sec, the calculated result show with the pitch rate starts from 57.3 deg/sec.
Please see the attached.
Hi everyone,
v6.48 is now available for download.
Please note that this may well be the last version of the application, since the development effort is now fully on flow5. Only major bugs, if any, will be corrected from now on.
André
There was no release tagged in svn and no source-tarball/-zip posted. Was this intentional?
Version 6.48 has now been tagged in the repo.
Was just an omission - thanks for the reminder.
Thanks!
Hi!,
When I try to use the Stability Analysis's Initial Condition Response with the initial condition p0, q0 or r0=10 deg/sec, the coresponding graphs starts with 573 deg/sec.
I believe this is because of confusion between radian and degree.
Could you check and correct it?
Thanks,
You need to start at r0=0 and make a smooth function. Otherwise it's a Dirac type impulsion which makes no physical sense.
No, I say about the "Initial Condition Response" not the "Forced Response".
For example, when I set the initial conditions for a longitudinal motion such as u0=w0=0 and q0=1.0 deg/sec, the calculated result show with the pitch rate starts from 57.3 deg/sec.
Please see the attached.
Last edit: NORIMICHI KAWAKAMI 2021-01-19
Fixed with commit 1251.
Commit 1251? Sorry I can not understand nor find it.
Last edit: NORIMICHI KAWAKAMI 2021-02-11