From: egan at sense.n. (E. Ford) - 2004-09-16 13:32:31
|
Try upgrading the IPMI.pm as well. As for patches, no. I plan to have a patch system in place after 1.2.0 releases, where you can just get the diffs. For now download all 3 pre6 tarballs, extract in /tmp and type: cd /tmp tar zcvf /tmp/xcat-pre5-pre6-patch.tgz $(find xcat -newer xcat/.release/RELEASE-1.2.0-pre5 -type f) > -----Original Message----- > From: Ryan Go [mailto:ry...@re...] > Sent: Wednesday, September 15, 2004 1:14 PM > To: xca...@li... > Subject: RE: [xcat-user] Xcat version with e325 BMC 1.42 > Importance: High > > > Hello Egan, > > Versions pre6's stage3 works fine as far as I could tell. It sets the > username OK but I the management node gets time'd out when > communication > with the node in question. > > Is there something else I should get from pre6? Since we're > on the topic > also, do you also distribute patches when you release newer > versions of > xcat? > > Thanks, > << ryan > > On Mon, 13 Sep 2004, Egan Ford wrote: > > > You need pre6. If you do not want to upgrade just get the > stage directory from > > pre6. > > > > > -----Original Message----- > > > From: Ryan Go [mailto:ry...@re...] > > > Sent: Monday, September 13, 2004 2:43 PM > > > To: Xcat Mailing List > > > Subject: [xcat-user] Xcat version with e325 BMC 1.42 > > > Importance: High > > > > > > > > > Hello all, > > > > > > I'm seeing issues with getting stage3 to work on a newly > upgraded BMC > > > firmware with the e325. Basically I'm seeing errors when > > > stage3 is trying > > > to set the username. > > > > > > My question is, does the BMC version (1.42) only work > with a specific > > > version of xcat? I believe I am using 1.2.0pre5. > > > > > > Thanks, > > > << ryan > > > > > > |