[xcas-devel] Readline pas pris en compte?

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Malgr=E9 la mise en place des constantes pr=E9processeur HAVE_READLINE_* =
au=20
sein du fichier config.h, le prompt de giac ne s'affiche toujours pas!

$ cas
1+1
2

Voici un log de l'install, montrant notamment la cr=E9ation du fichier=20
config.h:

Calculating dependencies  >>> Unpacking source...
 >>> Unpacking giac-0.6.2.tar.bz2 to /var/tmp/portage/giac-0.6.2/work
 >>> Unpacking casdoc.tgz to /var/tmp/portage/giac-0.6.2/work
 >>> Source unpacked.
 >>> Compiling source in /var/tmp/portage/giac-0.6.2/work/giac-0.6.2 ...
echo "/* setup.h */" > config.h
echo "" >> config.h
echo "/* Package name : */" >> config.h
echo "#define PACKAGE \"giac\" " >> config.h
echo "" >> config.h
echo "/* Giac Version : */" >> config.h
echo "#define VERSION \"0.6.2\" " >> config.h
echo "" >> config.h
echo "/* Flags for library dependencies : */" >> config.h
echo "#define HAVE_LIBREADLINE" >> config.h
echo "#define HAVE_READLINE_HISTORY_H" >> config.h
echo "#define HAVE_READLINE_READLINE_H" >> config.h
echo "#define HAVE_LIBMPFR" >> config.h
echo "#undef HAVE_LIBMPFI" >> config.h
echo "#define HAVE_LIBNTL" >> config.h
echo "#undef HAVE_LIBPARI" >> config.h
echo "#define HAVE_LIBGSL" >> config.h
echo "#define HAVE_LIBGSLCBLAS" >> config.h
g++ -c -o giac_sym2poly.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_sym2poly.o -MF`echo giac_sym2poly.o =
|=20
sed -e 's,\.o$,.d,'` -MD src/sym2poly.cc
g++ -c -o giac_gausspol.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_gausspol.o -MF`echo giac_gausspol.o =
|=20
sed -e 's,\.o$,.d,'` -MD src/gausspol.cc
g++ -c -o giac_moyal.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_moyal.o -MF`echo giac_moyal.o | sed=20
-e 's,\.o$,.d,'` -MD src/moyal.cc
g++ -c -o giac_maple.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_maple.o -MF`echo giac_maple.o | sed=20
-e 's,\.o$,.d,'` -MD src/maple.cc
g++ -c -o giac_ti89.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_ti89.o -MF`echo giac_ti89.o | sed -e=
=20
's,\.o$,.d,'` -MD src/ti89.cc
g++ -c -o giac_mathml.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_mathml.o -MF`echo giac_mathml.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/mathml.cc
g++ -c -o giac_misc.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_misc.o -MF`echo giac_misc.o | sed -e=
=20
's,\.o$,.d,'` -MD src/misc.cc
g++ -c -o giac_permu.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_permu.o -MF`echo giac_permu.o | sed=20
-e 's,\.o$,.d,'` -MD src/permu.cc
g++ -c -o giac_quater.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_quater.o -MF`echo giac_quater.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/quater.cc
g++ -c -o giac_desolve.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_desolve.o -MF`echo giac_desolve.o |=20
sed -e 's,\.o$,.d,'` -MD src/desolve.cc
g++ -c -o giac_input_parser.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_input_parser.o -MF`echo=20
giac_input_parser.o | sed -e 's,\.o$,.d,'` -MD src/input_parser.cc
g++ -c -o giac_symbolic.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_symbolic.o -MF`echo giac_symbolic.o =
|=20
sed -e 's,\.o$,.d,'` -MD src/symbolic.cc
g++ -c -o giac_index.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_index.o -MF`echo giac_index.o | sed=20
-e 's,\.o$,.d,'` -MD src/index.cc
g++ -c -o giac_modpoly.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_modpoly.o -MF`echo giac_modpoly.o |=20
sed -e 's,\.o$,.d,'` -MD src/modpoly.cc
g++ -c -o giac_ezgcd.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_ezgcd.o -MF`echo giac_ezgcd.o | sed=20
-e 's,\.o$,.d,'` -MD src/ezgcd.cc
g++ -c -o giac_derive.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_derive.o -MF`echo giac_derive.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/derive.cc
g++ -c -o giac_solve.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_solve.o -MF`echo giac_solve.o | sed=20
-e 's,\.o$,.d,'` -MD src/solve.cc
g++ -c -o giac_intg.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_intg.o -MF`echo giac_intg.o | sed -e=
=20
's,\.o$,.d,'` -MD src/intg.cc
g++ -c -o giac_risch.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_risch.o -MF`echo giac_risch.o | sed=20
-e 's,\.o$,.d,'` -MD src/risch.cc
g++ -c -o giac_lin.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_lin.o -MF`echo giac_lin.o | sed -e=20
's,\.o$,.d,'` -MD src/lin.cc
g++ -c -o giac_series.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_series.o -MF`echo giac_series.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/series.cc
g++ -c -o giac_subst.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_subst.o -MF`echo giac_subst.o | sed=20
-e 's,\.o$,.d,'` -MD src/subst.cc
g++ -c -o giac_vecteur.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_vecteur.o -MF`echo giac_vecteur.o |=20
sed -e 's,\.o$,.d,'` -MD src/vecteur.cc
g++ -c -o giac_tex.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_tex.o -MF`echo giac_tex.o | sed -e=20
's,\.o$,.d,'` -MD src/tex.cc
g++ -c -o giac_global.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_global.o -MF`echo giac_global.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/global.cc
g++ -c -o giac_ifactor.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_ifactor.o -MF`echo giac_ifactor.o |=20
sed -e 's,\.o$,.d,'` -MD src/ifactor.cc
g++ -c -o giac_alg_ext.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_alg_ext.o -MF`echo giac_alg_ext.o |=20
sed -e 's,\.o$,.d,'` -MD src/alg_ext.cc
g++ -c -o giac_gauss.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_gauss.o -MF`echo giac_gauss.o | sed=20
-e 's,\.o$,.d,'` -MD src/gauss.cc
g++ -c -o giac_isom.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_isom.o -MF`echo giac_isom.o | sed -e=
=20
's,\.o$,.d,'` -MD src/isom.cc
g++ -c -o giac_plot.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_plot.o -MF`echo giac_plot.o | sed -e=
=20
's,\.o$,.d,'` -MD src/plot.cc
g++ -c -o giac_plot3d.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_plot3d.o -MF`echo giac_plot3d.o | se=
d=20
-e 's,\.o$,.d,'` -MD src/plot3d.cc
g++ -c -o giac_help.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_help.o -MF`echo giac_help.o | sed -e=
=20
's,\.o$,.d,'` -MD src/help.cc
g++ -c -o giac_rpn.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_rpn.o -MF`echo giac_rpn.o | sed -e=20
's,\.o$,.d,'` -MD src/rpn.cc
g++ -c -o giac_prog.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_prog.o -MF`echo giac_prog.o | sed -e=
=20
's,\.o$,.d,'` -MD src/prog.cc
g++ -c -o giac_pari.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_pari.o -MF`echo giac_pari.o | sed -e=
=20
's,\.o$,.d,'` -MD src/pari.cc
g++ -c -o giac_unary.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_unary.o -MF`echo giac_unary.o | sed=20
-e 's,\.o$,.d,'` -MD src/unary.cc
g++ -c -o giac_usual.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_usual.o -MF`echo giac_usual.o | sed=20
-e 's,\.o$,.d,'` -MD src/usual.cc
g++ -c -o giac_identificateur.o -W -Wall -O0 -g -Iinclude -I. -fPIC=20
-DPIC  -march=3Dpentium-m -O2 -pipe -MTgiac_identificateur.o -MF`echo=20
giac_identificateur.o | sed -e 's,\.o$,.d,'` -MD src/identificateur.cc
g++ -c -o giac_gen.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_gen.o -MF`echo giac_gen.o | sed -e=20
's,\.o$,.d,'` -MD src/gen.cc
g++ -c -o giac_input_lexer.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_input_lexer.o -MF`echo=20
giac_input_lexer.o | sed -e 's,\.o$,.d,'` -MD src/input_lexer.cc
g++ -c -o giac_first.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_first.o -MF`echo giac_first.o | sed=20
-e 's,\.o$,.d,'` -MD src/first.cc
g++ -c -o giac_modfactor.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_modfactor.o -MF`echo giac_modfactor.=
o=20
| sed -e 's,\.o$,.d,'` -MD src/modfactor.cc
g++ -c -o giac_softmath.o -W -Wall -O0 -g -Iinclude -I. -fPIC -DPIC =20
-march=3Dpentium-m -O2 -pipe -MTgiac_softmath.o -MF`echo giac_softmath.o =
|=20
sed -e 's,\.o$,.d,'` -MD src/softmath.cc
touch doc/es/giac_es.html && makeinfo --html --no-split=20
doc/es/giac_es.texinfo
touch doc/en/giac_us.html && makeinfo --html --no-split=20
doc/en/giac_us.texinfo
g++ -shared -fPIC -o libgiac.so giac_sym2poly.o giac_gausspol.o=20
giac_moyal.o giac_maple.o giac_ti89.o giac_mathml.o giac_misc.o=20
giac_permu.o giac_quater.o giac_desolve.o giac_input_parser.o=20
giac_symbolic.o giac_index.o giac_modpoly.o giac_ezgcd.o giac_derive.o=20
giac_solve.o giac_intg.o giac_risch.o giac_lin.o giac_series.o=20
giac_subst.o giac_vecteur.o giac_tex.o giac_global.o giac_ifactor.o=20
giac_alg_ext.o giac_gauss.o giac_isom.o giac_plot.o giac_plot3d.o=20
giac_help.o giac_rpn.o giac_prog.o giac_pari.o giac_unary.o giac_usual.o=20
giac_identificateur.o giac_gen.o giac_input_lexer.o giac_first.o=20
giac_modfactor.o giac_softmath.o  -g  -lgmp -lreadline -lmpfr  -lntl =20
-lgsl -lgslcblas
g++ -c -o cas_cas2.o -W -Wall -O0 -g -Iinclude -I.  -march=3Dpentium-m -O=
2=20
-pipe -MTcas_cas2.o -MF`echo cas_cas2.o | sed -e 's,\.o$,.d,'` -MD=20
src/cas2.cc
g++ -o cas cas_cas2.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
g++ -c -o aide_aide.o -W -Wall -O0 -g -Iinclude -I.  -march=3Dpentium-m=20
-O2 -pipe -MTaide_aide.o -MF`echo aide_aide.o | sed -e 's,\.o$,.d,'` -MD=20
src/aide.cc
g++ -o aide aide_aide.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
 >>> Source compiled.
 >>> Test phase [not enabled]: sci-mathematics/giac-0.6.2

 >>> Install giac-0.6.2 into /var/tmp/portage/giac-0.6.2/image/ category=20
sci-mathematics
touch doc/es/giac_es.html && makeinfo --html --no-split=20
doc/es/giac_es.texinfo
touch doc/en/giac_us.html && makeinfo --html --no-split=20
doc/en/giac_us.texinfo
g++ -shared -fPIC -o libgiac.so giac_sym2poly.o giac_gausspol.o=20
giac_moyal.o giac_maple.o giac_ti89.o giac_mathml.o giac_misc.o=20
giac_permu.o giac_quater.o giac_desolve.o giac_input_parser.o=20
giac_symbolic.o giac_index.o giac_modpoly.o giac_ezgcd.o giac_derive.o=20
giac_solve.o giac_intg.o giac_risch.o giac_lin.o giac_series.o=20
giac_subst.o giac_vecteur.o giac_tex.o giac_global.o giac_ifactor.o=20
giac_alg_ext.o giac_gauss.o giac_isom.o giac_plot.o giac_plot3d.o=20
giac_help.o giac_rpn.o giac_prog.o giac_pari.o giac_unary.o giac_usual.o=20
giac_identificateur.o giac_gen.o giac_input_lexer.o giac_first.o=20
giac_modfactor.o giac_softmath.o  -g  -lgmp -lreadline -lmpfr  -lntl =20
-lgsl -lgslcblas
g++ -o cas cas_cas2.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
g++ -o aide aide_aide.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
install -d /var/tmp/portage/giac-0.6.2/image//usr/lib
install -m 644 libgiac.so /var/tmp/portage/giac-0.6.2/image//usr/lib
install -c libgiac.so /var/tmp/portage/giac-0.6.2/image//usr/lib
install -d /var/tmp/portage/giac-0.6.2/image//usr/bin
install -c cas /var/tmp/portage/giac-0.6.2/image//usr/bin
install -d /var/tmp/portage/giac-0.6.2/image//usr/bin
install -c aide /var/tmp/portage/giac-0.6.2/image//usr/bin
install -d /var/tmp/portage/giac-0.6.2/image//usr/include/giac
for f in config.h; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f`; \
    fi; \
    install -m 644 .//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/include/giac
for f in gen.h lin.h modfactor.h rpn.h tex.h risch.h symbolic.h=20
alg_ext.h sym2poly.h monomial.h maple.h ifactor.h solve.h first.h=20
global.h subst.h gauss.h ezgcd.h mathml.h giac.h moyal.h help.h intg.h=20
isom.h misc.h modpoly.h pari.h path.h plot.h poly.h prog.h unary.h=20
quater.h ti89.h desolve.h derive.h dispatch.h vecteur.h usual.h series.h=20
gausspol.h permu.h index.h fraction.h identificateur.h pariinl.h=20
input_lexer.h plot3d.h renee.h softmath.h; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f`; \
    fi; \
    install -m 644 include//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc
for f in es/giac_es.html en/giac_us.html; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/`dirname $f` ; then=
 \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/`dirname $f`; \
    fi; \
    install -m 644 doc//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/share/giac
for f in aide_cas; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/`dirname $f`; \
    fi; \
    install -m 644 doc//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/$f; \
    done
touch doc/es/giac_es.html && makeinfo --html --no-split=20
doc/es/giac_es.texinfo
touch doc/en/giac_us.html && makeinfo --html --no-split=20
doc/en/giac_us.texinfo
g++ -shared -fPIC -o libgiac.so giac_sym2poly.o giac_gausspol.o=20
giac_moyal.o giac_maple.o giac_ti89.o giac_mathml.o giac_misc.o=20
giac_permu.o giac_quater.o giac_desolve.o giac_input_parser.o=20
giac_symbolic.o giac_index.o giac_modpoly.o giac_ezgcd.o giac_derive.o=20
giac_solve.o giac_intg.o giac_risch.o giac_lin.o giac_series.o=20
giac_subst.o giac_vecteur.o giac_tex.o giac_global.o giac_ifactor.o=20
giac_alg_ext.o giac_gauss.o giac_isom.o giac_plot.o giac_plot3d.o=20
giac_help.o giac_rpn.o giac_prog.o giac_pari.o giac_unary.o giac_usual.o=20
giac_identificateur.o giac_gen.o giac_input_lexer.o giac_first.o=20
giac_modfactor.o giac_softmath.o  -g  -lgmp -lreadline -lmpfr  -lntl =20
-lgsl -lgslcblas
g++ -o cas cas_cas2.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
g++ -o aide aide_aide.o  -g   libgiac.so -lreadline -lncurses -ldl -lm=20
-lgmp -lmpfr  -lntl  -lgsl -lgslcblas
install -d /var/tmp/portage/giac-0.6.2/image//usr/lib
install -m 644 libgiac.so /var/tmp/portage/giac-0.6.2/image//usr/lib
install -c libgiac.so /var/tmp/portage/giac-0.6.2/image//usr/lib
install -d /var/tmp/portage/giac-0.6.2/image//usr/bin
install -c cas /var/tmp/portage/giac-0.6.2/image//usr/bin
install -d /var/tmp/portage/giac-0.6.2/image//usr/bin
install -c aide /var/tmp/portage/giac-0.6.2/image//usr/bin
install -d /var/tmp/portage/giac-0.6.2/image//usr/include/giac
for f in config.h; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f`; \
    fi; \
    install -m 644 .//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/include/giac
for f in gen.h lin.h modfactor.h rpn.h tex.h risch.h symbolic.h=20
alg_ext.h sym2poly.h monomial.h maple.h ifactor.h solve.h first.h=20
global.h subst.h gauss.h ezgcd.h mathml.h giac.h moyal.h help.h intg.h=20
isom.h misc.h modpoly.h pari.h path.h plot.h poly.h prog.h unary.h=20
quater.h ti89.h desolve.h derive.h dispatch.h vecteur.h usual.h series.h=20
gausspol.h permu.h index.h fraction.h identificateur.h pariinl.h=20
input_lexer.h plot3d.h renee.h softmath.h; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/`dirname $f`; \
    fi; \
    install -m 644 include//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/include/giac/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc
for f in es/giac_es.html en/giac_us.html; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/`dirname $f` ; then=
 \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/`dirname $f`; \
    fi; \
    install -m 644 doc//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/doc/$f; \
    done
install -d /var/tmp/portage/giac-0.6.2/image//usr/share/giac
for f in aide_cas; do \
    if test ! -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/`dirname $f` ; then \
    install -d=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/`dirname $f`; \
    fi; \
    install -m 644 doc//$f=20
/var/tmp/portage/giac-0.6.2/image//usr/share/giac/$f; \
    done
 >>> Completed installing giac-0.6.2 into /var/tmp/portage/giac-0.6.2/ima=
ge/

man:
strip: i686-pc-linux-gnu-strip --strip-unneeded
   usr/bin/cas
   usr/bin/aide
   usr/lib/libgiac.so

QA Notice: the following shared libraries lack a SONAME
 /var/tmp/portage/giac-0.6.2/image/usr/lib/libgiac.so

QA Notice: the following files contain runtime text relocations
 Text relocations force the dynamic linker to perform extra
 work at startup, waste system resources, and may pose a security
 risk.  On some architectures, the code may not even function
 properly, if at all.
 For more information, see http://hardened.gentoo.org/pic-fix-guide.xml
 Please include this file in your report:
 /var/tmp/portage/giac-0.6.2/temp/scanelf-textrel.log
TEXTREL usr/lib/libgiac.so

... done!

Y aurait-il quelque chose en plus =E0 faire? pourtant sur la version 0.4.=
0=20
tout cela fonctionnait bien.

a+

Andreas.