Menu
▾
▴
Re: [Xc3sprog-users] Spartan 6 and UM232H
|
From: JB <jbw...@gm...> - 2012-04-29 18:16:51
|
Hello, I tried it under Linux, and it worked perfectly! The uncanny thing is, I switched back to Windows to write this letter, and tried it once more under Windows, and it works! I have no idea what fixed it. Bálint On Sun, Apr 29, 2012 at 5:02 PM, JB <jbw...@gm...> wrote: > On Sun, Apr 29, 2012 at 4:40 PM, Uwe Bonnes > <bo...@el...> wrote: >> Hello JB, >> >> plase CC to xc3sprog-users so others can follow in the archive > > Sorry, will do. > >>>>>>> "JB" == JB <jbw...@gm...> writes: >> >> JB> == Could not open FTDI device (using libftdi): device not found == >> JB> FTD2XX/WIN: Can't set VID/PID to 0403:6014. Expect failure == Using >> JB> FTD2XX, == IDCODE mismatch pos 0 Read 0xffffffff vs 0x24001093 == >> JB> Running IR_TEST 10000 times == IR len = 6 == 0x binary 111111 >> JB> .......... == JTAG loc.: 0 IDCODE: 0x24001093 Desc: XC6SLX9 Rev: C >> JB> IR length: 6 >> >> The output may indicate problems with the chain. But you are running FTD2XX >> on Windows, while I run with FTDI on Linux, so this >> may also be some programming fault. >> >> Try to run the test longer, e.g.by xc3sproc -c um232 -T0. >> >> Try again programming with the -v option, perhaps more verbosity will give a hint. >> >> At the moment I have no other idea. > > == Cable um232h type ftdi VID 0x0403 PID 0x6014 dbus data 00 enable 0b > cbus data 00 data 00 > == FTD2XX/WIN: Can't set VID/PID to 0403:6014. Expect failure > == Using FTD2XX, Using JTAG frequency 1500000 from undivided clock > == Using built-in device list > == JTAG chainpos: 0 Device IDCODE = 0x24001093 Desc: XC6SLX9 > == IDCODE mismatch pos 0 Read 0xffffffff vs 0x24001093 > == Running IR_TEST 2147483647 times > == IR len = 6 > == 0x binary 111111 > ............................................................... > ................................................................................ > ................................................................................ > .. > == JTAG loc.: 0 IDCODE: 0x24001093 Desc: XC6SLX9 > Rev: C IR length: 6 > == USB transactions: Write 225950 read 225947 retries 0 > > Running the test longer didn't turn up anything. I will try it under Linux. > > Bálint |
