Menu
▾
▴
Re: [Xc3sprog-users] Xilinx Spartan-3A-DSP SPI programming issues
|
From: Uwe B. <bo...@el...> - 2011-08-27 10:15:19
|
>>>>> "Tomek" == Tomek CEDRO <tom...@gm...> writes:
Tomek> Hello! Thank you Uwe for xc3sprog and thank you Wojciech for
Tomek> making it possible on FreeBSD! This is great alternative for
Tomek> while iMPACT and messy Xilinx USB drivers, although I have FT2232
Tomek> and Xilinx USB cables, I am using Xilinx XPC cable to flash my
Tomek> device with some automation script added :-)
Tomek> I am able to upload bitstream into FPGA, but I cannot program SPI
Tomek> memory with success :-( There are errors during the flash process
Tomek> in random intervals, maybe some buffer is not fast enough, is it
Tomek> possible to slow down the JTAG clock? I am usin replaced Flash
Tomek> chip that is supported by iMPACT - ST 25P64. Please advise.
Tomek> XC3SPROG (c) 2004-2010 xc3sprog project $Rev: 449 $ OS: FreeBSD
Tomek> Free software: If you contribute nothing, expect nothing!
Tomek> Feedback on success/failure/enhancement requests:
Tomek> http://sourceforge.net/mail/?group_id=170565 Check Sourceforge
Tomek> for updates: http://sourceforge.net/projects/xc3sprog/develop
Tomek> firmware version = 0x0404 (1028) CPLD version = 0x0012 (18) DNA
Tomek> is 0xd14100d525220801 XC3SPROG (c) 2004-2010 xc3sprog project
Tomek> $Rev: 449 $ OS: FreeBSD Free software: If you contribute nothing,
Tomek> expect nothing! Feedback on success/failure/enhancement
Tomek> requests: http://sourceforge.net/mail/?group_id=170565 Check
Tomek> Sourceforge for updates:
Tomek> http://sourceforge.net/projects/xc3sprog/develop
Tomek> firmware version = 0x0404 (1028) CPLD version = 0x0012 (18)
Tomek> JEDEC: 20 20 0x17 0x10 Found Numonyx Device, Device ID 0x2017
...
I will try to reproduce in the next days.
--
Uwe Bonnes bo...@el...
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
|
