Re: [Xc3sprog-users] xc3sprog on Linux - CPLD erase failed

[Uwe B. <bo...@el...>]

>>>>> "Vaclav" == Vaclav Peroutka <vac...@se...> writes:

Hello Vaclav,

there are still some pending question I asked regarding your first posting.

    Vaclav> Hello all, I found another problem with xc3sprog, I don't know
    Vaclav> if it is caused by myself or something in the sw. I programmed
    Vaclav> CPLD XC9572XL for the first time but second time I can't erase
    Vaclav> it. Please have a look below.

    Vaclav> Is it caused by older sw version which did not support erase ?
    Vaclav> Is there any newer version with erase supported ? Or is the
    Vaclav> error caused by something on my PCB ?

    Vaclav> Thank you in advance, Vaclav

    Vaclav> $ ./xc3sprog -v -c ftdi

With problems reports, be sure to give as muchy information as
possible. Don't fear to repeat agains a former message, as other people have
other problems and daytime work and probably won't remenber exact. E.g. what
kind is you cable?

On a XP machine, I tried recent SVN and could read the Chain, read out the
Jedec File, compare the Jedec file and program it twice.

I suspect your  cable isn't a pure FTDI cable, with no enable between the
FT2232 and the buffers. So probably you have to give a subtype. 
-- 
Uwe Bonnes                bo...@el...

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------