Re: [Xc3sprog-users] Spartan 3A-DSP SPI / BPI

[Wojciech A. K. <wk...@Fr...>]

On Tue, Feb 02, 2010 at 10:56:03AM +0100, Uwe Bonnes wrote:
> >>>>> "Wojciech" == Wojciech A Koszek <wk...@Fr...> writes:
> 
>     Wojciech> On Mon, Feb 01, 2010 at 10:39:10PM +0000, CeDeROM wrote:
>     >> Hello Uwe!
>     >> 
>     >> On Mon, Feb 1, 2010 at 9:31 AM, Uwe Bonnes
>     >> <bo...@el...> wrote: > I tested reading
>     >> the ADSP board when adapting the SPI code. There is no BPI > code
>     >> yet, but contributions are welcome.  I did not test write the S33 on
>     >> > the ADSP, but i think I tested on other boards. What did you do?
>     >> What didn't > work as expected?
> 
>     Wojciech> [..]
>     >>  > The DLC9/10 needs firmware that is installed when the impact
>     >> driver is > installed.
>     >> 
>     >> Im using FT2232 and FT2232H based cables - none of them was detected
>     >> on the binary for win32. Are they supported off the box or I must
>     >> recompile?  Has anyone managed to run xc3sprogs on FreeBSD?
> 
>     Wojciech> With Spartan 3E Starter Kit it works with its internal USB
>     Wojciech> JTAG stuff on FreeBSD-9 CURRENT.
> 
>     Wojciech> I have FTDI-based ARM JTAG debugger, which is Amontec cable
>     Wojciech> clone, and since Amontec advertises possibility of replaying
>     Wojciech> SVFs via their device, it might be possible here as well.
> 
>     Wojciech> There were some problems with parallel cable and I've sent a
>     Wojciech> report to this list. Hopefully we'll be able to see it
>     Wojciech> shortly, as it's waiting for a moderator.
> 
> The list maintainer didn't answer yet. Probably I'll have to make an
> takeover, but give us some timne...
> 
> Wojciech, as I told Tomek your reports aren't very exact. Please tell
> Tomek: Your report isn't exact. You don't tell
> - what version of xc3sprog you use
> - who you invoked xc3sprog
> - how the dongle or it's USB device is recognized by the OS
> - whether you checked user access to the device
> - what output you got
> - what you expected
> - what you didn't like/understand with that output
> - what Readme you have reads
> - whether you loaded the bscan_spi bitmap before writing to the SPI flash
> ...

I don't know which report do you refer to here. My report mailed to you
privately contains all this information. Have you read it?

-- 
Wojciech A. Koszek
wk...@Fr...
http://FreeBSD.czest.pl/~wkoszek/