Re: [Xc3sprog-users] Spartan 3A-DSP SPI / BPI

[Uwe B. <bo...@el...>]

>>>>> "Wojciech" == Wojciech A Koszek <wk...@Fr...> writes:

    Wojciech> On Mon, Feb 01, 2010 at 10:39:10PM +0000, CeDeROM wrote:
    >> Hello Uwe!
    >> 
    >> On Mon, Feb 1, 2010 at 9:31 AM, Uwe Bonnes
    >> <bo...@el...> wrote: > I tested reading
    >> the ADSP board when adapting the SPI code. There is no BPI > code
    >> yet, but contributions are welcome.  I did not test write the S33 on
    >> > the ADSP, but i think I tested on other boards. What did you do?
    >> What didn't > work as expected?

    Wojciech> [..]
    >>  > The DLC9/10 needs firmware that is installed when the impact
    >> driver is > installed.
    >> 
    >> Im using FT2232 and FT2232H based cables - none of them was detected
    >> on the binary for win32. Are they supported off the box or I must
    >> recompile?  Has anyone managed to run xc3sprogs on FreeBSD?

    Wojciech> With Spartan 3E Starter Kit it works with its internal USB
    Wojciech> JTAG stuff on FreeBSD-9 CURRENT.

    Wojciech> I have FTDI-based ARM JTAG debugger, which is Amontec cable
    Wojciech> clone, and since Amontec advertises possibility of replaying
    Wojciech> SVFs via their device, it might be possible here as well.

    Wojciech> There were some problems with parallel cable and I've sent a
    Wojciech> report to this list. Hopefully we'll be able to see it
    Wojciech> shortly, as it's waiting for a moderator.

The list maintainer didn't answer yet. Probably I'll have to make an
takeover, but give us some timne...

Wojciech, as I told Tomek your reports aren't very exact. Please tell
Tomek: Your report isn't exact. You don't tell
- what version of xc3sprog you use
- who you invoked xc3sprog
- how the dongle or it's USB device is recognized by the OS
- whether you checked user access to the device
- what output you got
- what you expected
- what you didn't like/understand with that output
- what Readme you have reads
- whether you loaded the bscan_spi bitmap before writing to the SPI flash
...

Bye
-- 
Uwe Bonnes                bo...@el...

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------