Re: [Xc3sprog-users] Bringing FreeBSD support to xc3sprog.

[Uwe B. <bo...@el...>]

>>>>> "Wojciech" == Wojciech A Koszek <wk...@Fr...> writes:

...
    Wojciech> Before I prepare a port of xc3sprog for FreeBSD, I'll probably
    Wojciech> send you some more stuff. I want your xc3sprog to be
    Wojciech> identified well (Author+project URL), so that there is no
    Wojciech> confusion with Andrew Rogers' stuff and XUP code.

    Wojciech> Do they have something which your code doesn't have?

I started from Rogers sources, so everything should be included.

XUP uses a different firmware for the DLC9/10 dongles. No need for the a
different firmware with kawk's reverse engineering the Xilinx protocoll. I
didn't check if they added anythging else.

    >>  I added the errno.h in the FreeBSD conditional path. (Rev 428)
    >> 
    >> A CMAKE Toolchain File is only needed for crosscompiling. Did you
    >> crosscompile? Or does CMAKE not work appropriate on FreeBSD?  It's
    >> added as Rev 429.

    Wojciech> I just assumed you pick one CMAKE file for one family of
    Wojciech> systems. Can you use this string (system name) in the xc3sprog
    Wojciech> output somehow?

Normally you start "cmake" and it should configure for the running
system. Toolchainfiles only needed for crosscompiling. As I run on Suse
64-bit, I needed the Toolchain-SUSE32.cmake to compile the 32-bit binary.


...
    Wojciech> At home I'll just comment it out and perform some tests with
    Wojciech> small/big bitfiles and see if everything is more broken.

Look at the -T0 option to keep JTAG busy.

Bye
-- 
Uwe Bonnes                bo...@el...

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------