Diff of /configure [e160e9] .. [dfeaff]  Maximize  Restore

Switch to side-by-side view

--- a/configure
+++ b/configure
@@ -712,6 +712,96 @@
 ac_config_sub=$ac_aux_dir/config.sub
 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:744: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:765: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:783: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -724,7 +814,7 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:728: checking for a BSD compatible install" >&5
+echo "configure:818: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -777,7 +867,7 @@
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:781: checking whether build environment is sane" >&5
+echo "configure:871: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -834,7 +924,7 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:838: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:928: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -880,7 +970,7 @@
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:884: checking for working aclocal" >&5
+echo "configure:974: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -893,7 +983,7 @@
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:897: checking for working autoconf" >&5
+echo "configure:987: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -906,7 +996,7 @@
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:910: checking for working automake" >&5
+echo "configure:1000: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -919,7 +1009,7 @@
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:923: checking for working autoheader" >&5
+echo "configure:1013: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -932,7 +1022,7 @@
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:936: checking for working makeinfo" >&5
+echo "configure:1026: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -949,37 +1039,10 @@
 
 
 
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:960: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:983: checking for $ac_word" >&5
+echo "configure:1046: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1009,7 +1072,7 @@
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1013: checking for $ac_word" >&5
+echo "configure:1076: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1060,7 +1123,7 @@
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1064: checking for $ac_word" >&5
+echo "configure:1127: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1092,7 +1155,7 @@
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1096: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1159: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1103,12 +1166,12 @@
 
 cat > conftest.$ac_ext << EOF
 
-#line 1107 "configure"
+#line 1170 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1175: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1134,12 +1197,12 @@
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1138: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1201: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1143: checking whether we are using GNU C" >&5
+echo "configure:1206: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1148,7 +1211,7 @@
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1167,7 +1230,7 @@
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1171: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1234: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1199,7 +1262,7 @@
 fi
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1203: checking how to run the C preprocessor" >&5
+echo "configure:1266: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1214,13 +1277,13 @@
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1218 "configure"
+#line 1281 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1224: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1287: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1231,13 +1294,13 @@
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1235 "configure"
+#line 1298 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1304: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1248,13 +1311,13 @@
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1252 "configure"
+#line 1315 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1321: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1279,12 +1342,12 @@
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1283: checking for ANSI C header files" >&5
+echo "configure:1346: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1288 "configure"
+#line 1351 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1292,7 +1355,7 @@
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1309,7 +1372,7 @@
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1313 "configure"
+#line 1376 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1327,7 +1390,7 @@
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1331 "configure"
+#line 1394 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1348,7 +1411,7 @@
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1352 "configure"
+#line 1415 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1359,7 +1422,7 @@
 exit (0); }
 
 EOF
-if { (eval echo configure:1363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1395,12 +1458,12 @@
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1399: checking for Cygwin environment" >&5
+echo "configure:1462: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1404 "configure"
+#line 1467 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1411,7 +1474,7 @@
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:1415: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1478: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -1428,19 +1491,19 @@
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1432: checking for mingw32 environment" >&5
+echo "configure:1495: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1500 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:1444: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1507: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -1525,24 +1588,6 @@
   enable_fast_install=yes
 fi
 
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1530: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
   withval="$with_gnu_ld"
@@ -1555,7 +1600,7 @@
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1559: checking for ld used by GCC" >&5
+echo "configure:1604: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1585,10 +1630,10 @@
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1589: checking for GNU ld" >&5
+echo "configure:1634: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1592: checking for non-GNU ld" >&5
+echo "configure:1637: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1623,7 +1668,7 @@
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1627: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1672: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1640,7 +1685,7 @@
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1644: checking for $LD option to reload object files" >&5
+echo "configure:1689: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1652,7 +1697,7 @@
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1656: checking for BSD-compatible nm" >&5
+echo "configure:1701: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1690,7 +1735,7 @@
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1694: checking whether ln -s works" >&5
+echo "configure:1739: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1711,7 +1756,7 @@
 fi
 
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1715: checking how to recognise dependant libraries" >&5
+echo "configure:1760: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1888,13 +1933,13 @@
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1892: checking for object suffix" >&5
+echo "configure:1937: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1898: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1943: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -1914,7 +1959,7 @@
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1918: checking for executable suffix" >&5
+echo "configure:1963: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1924,7 +1969,7 @@
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.$ac_ext | *.c | *.o | *.obj) ;;
@@ -1955,7 +2000,7 @@
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1959: checking command to parse $NM output" >&5
+echo "configure:2004: checking command to parse $NM output" >&5
 if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2035,10 +2080,10 @@
 int main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
 
-  if { (eval echo configure:2039: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  if { (eval echo configure:2084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { (eval echo configure:2042: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
+    if { (eval echo configure:2087: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -2089,7 +2134,7 @@
 	  save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:2093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	  if { (eval echo configure:2138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
 	    pipe_works=yes
 	  fi
 	  LIBS="$save_LIBS"
@@ -2138,17 +2183,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2142: checking for $ac_hdr" >&5
+echo "configure:2187: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2147 "configure"
+#line 2192 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2183,7 +2228,7 @@
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2187: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2232: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2245,7 +2290,7 @@
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2249: checking for file" >&5
+echo "configure:2294: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2316,7 +2361,7 @@
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2320: checking for $ac_word" >&5
+echo "configure:2365: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2348,7 +2393,7 @@
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2352: checking for $ac_word" >&5
+echo "configure:2397: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2383,7 +2428,7 @@
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2387: checking for $ac_word" >&5
+echo "configure:2432: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2415,7 +2460,7 @@
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2419: checking for $ac_word" >&5
+echo "configure:2464: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2464,8 +2509,8 @@
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2468 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2469: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2513 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -2486,7 +2531,7 @@
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2490: checking whether the C compiler needs -belf" >&5
+echo "configure:2535: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2499,14 +2544,14 @@
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 2503 "configure"
+#line 2548 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -2626,7 +2671,7 @@
 compiler="$2"
 
 echo $ac_n "checking for objdir""... $ac_c" 1>&6
-echo "configure:2630: checking for objdir" >&5
+echo "configure:2675: checking for objdir" >&5
 rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
 if test -d .libs; then
@@ -2653,7 +2698,7 @@
 # in isolation, and that seeing it set (from the cache) indicates that
 # the associated values are set (in the cache) correctly too.
 echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
-echo "configure:2657: checking for $compiler option to produce PIC" >&5
+echo "configure:2702: checking for $compiler option to produce PIC" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2805,21 +2850,21 @@
 
   # Check to make sure the pic_flag actually works.
   echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
-echo "configure:2809: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+echo "configure:2854: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
   if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
       save_CFLAGS="$CFLAGS"
     CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
     cat > conftest.$ac_ext <<EOF
-#line 2816 "configure"
+#line 2861 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2823: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2868: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
         case $host_os in
       hpux9* | hpux10* | hpux11*)
@@ -2871,7 +2916,7 @@
 fi
 
 echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
-echo "configure:2875: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+echo "configure:2920: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2879,14 +2924,14 @@
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
   cat > conftest.$ac_ext <<EOF
-#line 2883 "configure"
+#line 2928 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_prog_cc_static_works=yes
 else
@@ -2913,7 +2958,7 @@
 
 # Check to see if options -o and -c are simultaneously supported by compiler
 echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
-echo "configure:2917: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo "configure:2962: checking if $compiler supports -c -o file.$ac_objext" >&5
 if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2932,7 +2977,7 @@
 save_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
 compiler_c_o=no
-if { (eval echo configure:2936: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:2981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
   if test -s out/conftest.err; then
@@ -2961,7 +3006,7 @@
 if test x"$compiler_c_o" = x"yes"; then
   # Check to see if we can write to a .lo
   echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
-echo "configure:2965: checking if $compiler supports -c -o file.lo" >&5
+echo "configure:3010: checking if $compiler supports -c -o file.lo" >&5
   if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2972,14 +3017,14 @@
   save_objext="$ac_objext"
   ac_objext=lo
   cat > conftest.$ac_ext <<EOF
-#line 2976 "configure"
+#line 3021 "configure"
 #include "confdefs.h"
 
 int main() {
 int some_variable = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:2983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3028: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
       # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
@@ -3010,7 +3055,7 @@
 if test "$compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
-echo "configure:3014: checking if we can lock with hard links" >&5
+echo "configure:3059: checking if we can lock with hard links" >&5
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
@@ -3029,20 +3074,20 @@
 if test "$GCC" = yes; then
   # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
   echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
-echo "configure:3033: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo "configure:3078: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
   echo "int some_variable = 0;" > conftest.$ac_ext
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
   compiler_rtti_exceptions=no
   cat > conftest.$ac_ext <<EOF
-#line 3039 "configure"
+#line 3084 "configure"
 #include "confdefs.h"
 
 int main() {
 int some_variable = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:3046: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3091: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
       # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
@@ -3069,7 +3114,7 @@
 
 # See if the linker supports building shared libraries.
 echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
-echo "configure:3073: checking whether the linker ($LD) supports shared libraries" >&5
+echo "configure:3118: checking whether the linker ($LD) supports shared libraries" >&5
 
 allow_undefined_flag=
 no_undefined_flag=
@@ -3754,7 +3799,7 @@
 
 # Check hardcoding attributes.
 echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
-echo "configure:3758: checking how to hardcode library paths into programs" >&5
+echo "configure:3803: checking how to hardcode library paths into programs" >&5
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" || \
    test -n "$runpath_var"; then
@@ -3782,7 +3827,7 @@
 striplib=
 old_striplib=
 echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
-echo "configure:3786: checking whether stripping libraries is possible" >&5
+echo "configure:3831: checking whether stripping libraries is possible" >&5
 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
@@ -3796,7 +3841,7 @@
 
 # PORTME Fill in your ld.so characteristics
 echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
-echo "configure:3800: checking dynamic linker characteristics" >&5
+echo "configure:3845: checking dynamic linker characteristics" >&5
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -4197,11 +4242,11 @@
 
 # Report the final consequences.
 echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
-echo "configure:4201: checking if libtool supports shared libraries" >&5
+echo "configure:4246: checking if libtool supports shared libraries" >&5
 echo "$ac_t""$can_build_shared" 1>&6
 
 echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
-echo "configure:4205: checking whether to build shared libraries" >&5
+echo "configure:4250: checking whether to build shared libraries" >&5
 test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
@@ -4224,7 +4269,7 @@
 echo "$ac_t""$enable_shared" 1>&6
 
 echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
-echo "configure:4228: checking whether to build static libraries" >&5
+echo "configure:4273: checking whether to build static libraries" >&5
 # Make sure either enable_shared or enable_static is yes.
 test "$enable_shared" = yes || enable_static=yes
 echo "$ac_t""$enable_static" 1>&6
@@ -4265,12 +4310,12 @@
 
   *)
     echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "configure:4269: checking for shl_load" >&5
+echo "configure:4314: checking for shl_load" >&5
 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4274 "configure"
+#line 4319 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char shl_load(); below.  */
@@ -4293,7 +4338,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_shl_load=yes"
 else
@@ -4311,7 +4356,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:4315: checking for shl_load in -ldld" >&5
+echo "configure:4360: checking for shl_load in -ldld" >&5
 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4319,7 +4364,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4323 "configure"
+#line 4368 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4330,7 +4375,7 @@
 shl_load()
 ; return 0; }
 EOF
-if { (eval echo configure:4334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4349,12 +4394,12 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "configure:4353: checking for dlopen" >&5
+echo "configure:4398: checking for dlopen" >&5
 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4358 "configure"
+#line 4403 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dlopen(); below.  */
@@ -4377,7 +4422,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:4381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dlopen=yes"
 else
@@ -4395,7 +4440,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4399: checking for dlopen in -ldl" >&5
+echo "configure:4444: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4403,7 +4448,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4407 "configure"
+#line 4452 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4414,7 +4459,7 @@
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:4418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4433,7 +4478,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
-echo "configure:4437: checking for dlopen in -lsvld" >&5
+echo "configure:4482: checking for dlopen in -lsvld" >&5
 ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4441,7 +4486,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-lsvld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4445 "configure"
+#line 4490 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4452,7 +4497,7 @@
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:4456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4471,7 +4516,7 @@
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "configure:4475: checking for dld_link in -ldld" >&5
+echo "configure:4520: checking for dld_link in -ldld" >&5
 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4479,7 +4524,7 @@
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4483 "configure"
+#line 4528 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4490,7 +4535,7 @@
 dld_link()
 ; return 0; }
 EOF
-if { (eval echo configure:4494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4546,7 +4591,7 @@
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4550: checking whether a program can dlopen itself" >&5
+echo "configure:4595: checking whether a program can dlopen itself" >&5
 if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4556,7 +4601,7 @@
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 4560 "configure"
+#line 4605 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -4617,7 +4662,7 @@
     exit (status);
 }
 EOF
-  if { (eval echo configure:4621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  if { (eval echo configure:4666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -4640,7 +4685,7 @@
     if test "x$lt_cv_dlopen_self" = xyes; then
       LDFLAGS="$LDFLAGS $link_static_flag"
       echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4644: checking whether a statically linked program can dlopen itself" >&5
+echo "configure:4689: checking whether a statically linked program can dlopen itself" >&5
 if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4650,7 +4695,7 @@
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 4654 "configure"
+#line 4699 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -4711,7 +4756,7 @@
     exit (status);
 }
 EOF
-  if { (eval echo configure:4715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  if { (eval echo configure:4760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -4760,14 +4805,14 @@
     # systems, -lgcc has to come before -lc. If gcc already passes -lc
     # to ld, don't add -lc before -lgcc.
     echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
-echo "configure:4764: checking whether -lc should be explicitly linked in" >&5
+echo "configure:4809: checking whether -lc should be explicitly linked in" >&5
     if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   $rm conftest*
     echo 'static int dummy;' > conftest.$ac_ext
 
-    if { (eval echo configure:4771: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+    if { (eval echo configure:4816: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
       soname=conftest
       lib=conftest
       libobjs=conftest.$ac_objext
@@ -4780,7 +4825,7 @@
       libname=conftest
       save_allow_undefined_flag=$allow_undefined_flag
       allow_undefined_flag=
-      if { (eval echo configure:4784: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
+      if { (eval echo configure:4829: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
       then
 	lt_cv_archive_cmds_need_lc=no
       else
@@ -5363,12 +5408,12 @@
  
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5367: checking for working const" >&5
+echo "configure:5412: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5372 "configure"
+#line 5417 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -5417,7 +5462,7 @@
 
 ; return 0; }
 EOF
-if { (eval echo configure:5421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -5438,21 +5483,21 @@
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:5442: checking for inline" >&5
+echo "configure:5487: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 5449 "configure"
+#line 5494 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:5456: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5501: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -5478,12 +5523,12 @@
 esac
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5482: checking for size_t" >&5
+echo "configure:5527: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5487 "configure"
+#line 5532 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5515,17 +5560,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5519: checking for $ac_hdr" >&5
+echo "configure:5564: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5524 "configure"
+#line 5569 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5552,20 +5597,32 @@
 done
 
 
+case x"${target_os}" in
+  x)
+    SYS=unknown
+    ;;
+  xdarwin*)
+    SYS=darwin
+    ;;
+  x*)
+    SYS=${target_os}
+    ;;
+esac
+
 echo $ac_n "checking for boolean_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:5557: checking for boolean_t in sys/types.h" >&5
+echo "configure:5614: checking for boolean_t in sys/types.h" >&5
 if eval "test \"`echo '$''{'ac_cv_c_boolean_t_sys_types_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5562 "configure"
+#line 5619 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 int main() {
 boolean_t foo;
 ; return 0; }
 EOF
-if { (eval echo configure:5569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_boolean_t_sys_types_h=yes
 else
@@ -5586,19 +5643,19 @@
 fi
 
 echo $ac_n "checking for boolean_t in pthread.h""... $ac_c" 1>&6
-echo "configure:5590: checking for boolean_t in pthread.h" >&5
+echo "configure:5647: checking for boolean_t in pthread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_c_boolean_t_pthread_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5595 "configure"
+#line 5652 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 int main() {
 boolean_t foo;
 ; return 0; }
 EOF
-if { (eval echo configure:5602: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5659: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_boolean_t_pthread_h=yes
 else
@@ -5619,19 +5676,19 @@
 fi
 
 echo $ac_n "checking for boolean_t in cthreads.h""... $ac_c" 1>&6
-echo "configure:5623: checking for boolean_t in cthreads.h" >&5
+echo "configure:5680: checking for boolean_t in cthreads.h" >&5
 if eval "test \"`echo '$''{'ac_cv_c_boolean_t_cthreads_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5628 "configure"
+#line 5685 "configure"
 #include "confdefs.h"
 #include <cthreads.h>
 int main() {
 boolean_t foo;
 ; return 0; }
 EOF
-if { (eval echo configure:5635: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5692: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_boolean_t_cthreads_h=yes
 else
@@ -5658,17 +5715,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5662: checking for $ac_hdr" >&5
+echo "configure:5719: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5667 "configure"
+#line 5724 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5672: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5729: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5701,17 +5758,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5705: checking for $ac_hdr" >&5
+echo "configure:5762: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5710 "configure"
+#line 5767 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5737,17 +5794,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5741: checking for $ac_hdr" >&5
+echo "configure:5798: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5746 "configure"
+#line 5803 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5777,7 +5834,7 @@
   LINUX_DVD_STRUCT=0
   OPENBSD_DVD_STRUCT=0
         cat > conftest.$ac_ext <<EOF
-#line 5781 "configure"
+#line 5838 "configure"
 #include "confdefs.h"
 #include <sys/cdio.h>
 EOF
@@ -5790,7 +5847,7 @@
 EOF
 
     cat > conftest.$ac_ext <<EOF
-#line 5794 "configure"
+#line 5851 "configure"
 #include "confdefs.h"
 #include <sys/cdio.h>
 EOF
@@ -5810,7 +5867,7 @@
 rm -f conftest*
 
         cat > conftest.$ac_ext <<EOF
-#line 5814 "configure"
+#line 5871 "configure"
 #include "confdefs.h"
 #include <sys/dvdio.h>
 EOF
@@ -5823,7 +5880,7 @@
 EOF
 
     cat > conftest.$ac_ext <<EOF
-#line 5827 "configure"
+#line 5884 "configure"
 #include "confdefs.h"
 #include <sys/dvdio.h>
 EOF
@@ -5843,7 +5900,7 @@
 rm -f conftest*
 
         cat > conftest.$ac_ext <<EOF
-#line 5847 "configure"
+#line 5904 "configure"
 #include "confdefs.h"
 #include <linux/cdrom.h>
 EOF
@@ -5862,7 +5919,7 @@
 
         NEED_BSDI_LIBDVD=0
   cat > conftest.$ac_ext <<EOF
-#line 5866 "configure"
+#line 5923 "configure"
 #include "confdefs.h"
 #include <dvd.h>
 EOF
@@ -5884,17 +5941,17 @@
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5888: checking for $ac_hdr" >&5
+echo "configure:5945: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5893 "configure"
+#line 5950 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5898: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5934,17 +5991,17 @@
 
         ac_safe=`echo "sys/scsi/scsi_types.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/scsi/scsi_types.h""... $ac_c" 1>&6
-echo "configure:5938: checking for sys/scsi/scsi_types.h" >&5
+echo "configure:5995: checking for sys/scsi/scsi_types.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5943 "configure"
+#line 6000 "configure"
 #include "confdefs.h"
 #include <sys/scsi/scsi_types.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5963,17 +6020,17 @@
   
     ac_safe=`echo "sys/scsi/impl/uscsi.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/scsi/impl/uscsi.h""... $ac_c" 1>&6
-echo "configure:5967: checking for sys/scsi/impl/uscsi.h" >&5
+echo "configure:6024: checking for sys/scsi/impl/uscsi.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5972 "configure"
+#line 6029 "configure"
 #include "confdefs.h"
 #include <sys/scsi/impl/uscsi.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5977: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6034: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6006,17 +6063,17 @@
 
         ac_safe=`echo "sys/scsi.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for sys/scsi.h""... $ac_c" 1>&6
-echo "configure:6010: checking for sys/scsi.h" >&5
+echo "configure:6067: checking for sys/scsi.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6015 "configure"
+#line 6072 "configure"
 #include "confdefs.h"
 #include <sys/scsi.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6020: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6077: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6034,7 +6091,7 @@
   echo "$ac_t""yes" 1>&6
   
     cat > conftest.$ac_ext <<EOF
-#line 6038 "configure"
+#line 6095 "configure"
 #include "confdefs.h"
 #include <sys/scsi.h>
 EOF
@@ -6057,17 +6114,17 @@
 
         ac_safe=`echo "IOKit/storage/IODVDMediaBSDClient.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for IOKit/storage/IODVDMediaBSDClient.h""... $ac_c" 1>&6
-echo "configure:6061: checking for IOKit/storage/IODVDMediaBSDClient.h" >&5
+echo "configure:6118: checking for IOKit/storage/IODVDMediaBSDClient.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6066 "configure"
+#line 6123 "configure"
 #include "confdefs.h"
 #include <IOKit/storage/IODVDMediaBSDClient.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6120,6 +6177,11 @@
 
 
 CFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DDVDCSS_DIST $CFLAGS"
+
+if test x$SYS = xdarwin
+then
+  CFLAGS="${CFLAGS} -no-cpp-precomp"
+fi
 
 
 
@@ -6257,6 +6319,21 @@
 s%@oldincludedir@%$oldincludedir%g
 s%@infodir@%$infodir%g
 s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
@@ -6268,18 +6345,8 @@
 s%@AUTOHEADER@%$AUTOHEADER%g
 s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
 s%@CC@%$CC%g
 s%@CPP@%$CPP%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
 s%@LN_S@%$LN_S%g
 s%@OBJEXT@%$OBJEXT%g
 s%@EXEEXT@%$EXEEXT%g

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks