378 lines (338 with data), 11.0 kB
.TH @CDPARANOIA_NAME@ 1 "version III release alpha 9.8 libcdio"
@CDPARANOIA_NAME@ 9.8 (Paranoia release III via libcdio) \- an audio CD reading utility which includes extra data verification features
.RB [ options ]
.RB [ outfile ]
retrieves audio tracks from CDDA capable CD-ROM drives. The data can
be saved to a file or directed to standard output in WAV, AIFF, AIFF-C
or raw format. Most ATAPI, SCSI and several proprietary CD-ROM drive
makes are supported;
can determine if the target drive is CDDA capable.
In addition to simple reading,
adds extra-robust data verification, synchronization, error handling
and scratch reconstruction capability.
This version uses the libcdio library for interaction with a CD-ROM
drive. The jitter and error correction however are the same as used in
.B \-v --verbose
Be absurdly verbose about the autosensing and reading process. Good
for setup and debugging.
.B \-q --quiet
Do not print any progress or error information during the reading process.
.B \-e --stderr-progress
Force output of progress information to stderr (for wrapper scripts).
.B \-V --version
Print the program version and quit.
.B \-Q --query
Perform CD-ROM drive autosense, query and print the CD-ROM table of
contents, then quit.
.B \-s --search-for-drive
Forces a complete search for a cdrom drive, even if the /dev/cdrom link exists.
.B \-h --help
Print a brief synopsis of
usage and options.
.B \-p --output-raw
Output headerless data as raw 16 bit PCM data with interleaved samples in host byte order. To force little or big endian byte order, use
as described below.
.B \-r --output-raw-little-endian
Output headerless data as raw 16 bit PCM data with interleaved samples in LSB first byte order.
.B \-R --output-raw-big-endian
Output headerless data as raw 16 bit PCM data with interleaved samples in MSB first byte order.
.B \-w --output-wav
Output data in Micro$oft RIFF WAV format (note that WAV data is always
LSB first byte order).
.B \-f --output-aiff
Output data in Apple AIFF format (note that AIFC data is
always in MSB first byte order).
.B \-a --output-aifc
Output data in uncompressed Apple AIFF-C format (note that AIFF-C data is
always in MSB first byte order).
.BI "\-B --batch "
Cdda2wav-style batch output flag; @CDPARANOIA_NAME@ will split the output
into multiple files at track boundaries. Output file names are
prepended with 'track#.'
.B \-c --force-cdrom-little-endian
Some CD-ROM drives misreport their endianness (or do not report it at
all); it's possible that @CDPARANOIA_NAME@ will guess wrong. Use
to force @CDPARANOIA_NAME@ to treat the drive as a little endian device.
.B \-C --force-cdrom-big-endian
As above but force @CDPARANOIA_NAME@ to treat the drive as a big endian device.
.BI "\-n --force-default-sectors " n
Force the interface backend to do atomic reads of
sectors per read. This number can be misleading; the kernel will often
split read requests into multiple atomic reads (the automated Paranoia
code is aware of this) or allow reads only wihin a restricted size
.B This option should generally not be used.
.BI "\-d --force-cdrom-device " device
Force the interface backend to read from
rather than the first readable CD-ROM drive it finds containing a
CD-DA disc. This can be used to specify devices of any valid
interface type (ATAPI, SCSI or proprietary).
.BI "\-g --force-generic-device " device
This option is an alias for
and is retained for compatibility.
.BI "\-S --force-read-speed " number
Use this option explicitly to set the read rate of the CD drive (where
supported). This can reduce underruns on machines with slow disks, or
which are low on memory.
.BI "\-t --toc-offset " number
Use this option to force the entire disc LBA addressing to shift by
the given amount; the value is added to the beginning offsets in the
TOC. This can be used to shift track boundaries for the whole disc
manually on sector granularity. The next option does something
.BI "\-T --toc-bias "
Some drives (usually random Toshibas) report the actual track
beginning offset values in the TOC, but then treat the beginning of
track 1 index 1 as sector 0 for all read operations. This results in
every track seeming to start too late (losing a bit of the beginning
and catching a bit of the next track).
\-T accounts for this behavior. Note that this option will cause
@CDPARANOIA_NAME@ to attempt to read sectors before or past the known user
data area of the disc, resulting in read errors at disc edges on most
drives and possibly even hard lockups on some buggy hardware.
.BI "\-O --sample-offset " number
Some CD-ROM/CD-R drives will add an offset to the position on reading
audio data. This is usually around 500-700 audio samples (ca. 1/75
second) on reading. So when @CDPARANOIA_NAME@ queries a specific
sector, it might not receive exactly that sector, but shifted by some
Use this option to force the entire disc to shift sample position
output by the given amount; This can be used to shift track boundaries
for the whole disc manually on sample granularity. Note that if you
are ripping something including the ending of the CD (e.g. the entire
disk), this option will cause @CDPARANOIA_NAME@ to attempt to read
partial sectors before or past the known user data area, probably
causing read errors on most drives and possibly even hard lockups on
some buggy hardware.
.B \-Z --disable-paranoia
data verification and correction features. When using -Z, @CDPARANOIA_NAME@
reads data exactly as would cdda2wav with an overlap setting of zero.
This option implies that
.B \-z --never-skip[=max_retries]
Do not accept any skips; retry forever if needed. An optional maximum
number of retries can be specified; for comparison, default without -z is
.B \-Y --disable-extra-paranoia
Disables intra-read data verification; only overlap checking at read
boundaries is performed. It can wedge if errors occur in the attempted overlap area. Not recommended.
.B \-X --abort-on-skip
If the read skips due to imperfect data, a scratch, whatever, abort reading this track. If output is to a file, delete the partially completed file.
.B \-x --test-flags mask
Simulate CD-reading errors. This is used in regression testing, but
other uses might be to see how well a CD-ROM performs under
(simulated) CD degradation. mask specifies the artificial kinds of
errors to introduced; "or"-ing values from the selection below will
simulate the kind of specified failure.
0x10 - Simulate under-run reading
.SH OUTPUT SMILIES
Normal operation, low/no jitter
Normal operation, considerable jitter
Unreported loss of streaming in atomic read operation
Finding read problems at same point during reread; hard to correct
SCSI/ATAPI transport error
Gave up trying to perform a correction
Aborted read due to known, uncorrectable error
.SH PROGRESS BAR SYMBOLS
No corrections needed
Jitter correction required
Unreported loss of streaming/other error in read
Errors found after stage 1 correction; the drive is making the
same error through multiple re-reads, and @CDPARANOIA_NAME@ is having trouble
SCSI/ATAPI transport error (corrected)
.SH SPAN ARGUMENT
The span argument specifies which track, tracks or subsections of
tracks to read. This argument is required.
Unless the span is a simple number, it's generally a good idea to
quote the span argument to protect it from the shell.
The span argument may be a simple track number or an offset/span
specification. The syntax of an offset/span takes the rough form:
Here, 1 and 2 are track numbers; the numbers in brackets provide a
finer grained offset within a particular track. [aa:bb:cc.dd] is in
hours/minutes/seconds/sectors format. Zero fields need not be
specified: [::20], [:20], , [20.], etc, would be interpreted as
twenty seconds, [10:] would be ten minutes, [.30] would be thirty
sectors (75 sectors per second).
When only a single offset is supplied, it is interpreted as a starting
offset and ripping will continue to the end of the track. If a single
offset is preceeded or followed by a hyphen, the implicit missing
offset is taken to be the start or end of the disc, respectively. Thus:
Specifies ripping from track 1, second 20, sector 35 to the end of
Specifies ripping from 1[20.35] to the end of the disc
Specifies ripping from the beginning of the disc up to (and including) track 2
Specifies ripping from the beginning of the disc up to 2:[30.35]
Specifies ripping from the beginning of track 2 to the end of track 4.
Again, don't forget to protect square brackets and preceeding hyphens from
A few examples, protected from the shell:
Query only with exhaustive search for a drive and full reporting of autosense:
Extract an entire disc, putting each track in a seperate file:
Extract from track 1, time 0:30.12 to 1:10.00:
Extract from the beginning of the disc up to track 3:
@CDPARANOIA_NAME@ -- "-3"
The "--" above is to distinguish "-3" from an option flag.
The output file argument is optional; if it is not specified,
@CDPARANOIA_NAME@ will output samples to one of
.BR cdda.wav ", " cdda.aifc ", or " cdda.raw
depending on whether
.BR \-w ", " \-a ", " \-r " or " \-R " is used (" \-w
is the implicit default). The output file argument of
specifies standard output; all data formats may be piped.
@CDPARANOIA_NAME@ sprang from and once drew heavily from the interface of
Heiko Eissfeldt's (firstname.lastname@example.org) 'cdda2wav'
package. @CDPARANOIA_NAME@ would not have happened without it.
Joerg Schilling has also contributed SCSI expertise through his
generic SCSI transport library.
Cdparanoia's homepage may be found at:
Revised for use with libcdio by Rocky <email@example.com>
The libcdio homepage may be found at: