Re: [wsjt-devel] Icom IC-910 rig failure

[Kyle Y <yo...@gm...>]

Good evening. Following up on this issue. Today I downloaded the most
recent Hamlib (4.7~GIT 2025-08-30T09) and I am happy to report that CAT
control now works on my Icom 910 directly, without having to use Ham Radio
Deluxe!

I did notice that TX via CAT does not work however. It does work using CAT
in Ham Radio Deluxe.

Thanks. 73

Kyle
K0KN

On Sat, Jul 19, 2025 at 11:29 AM Kyle Y <yo...@gm...> wrote:

> Hello all. Thanks for the comments and suggestions. I am using the 64 bit
> version of WSJT-x 2.7.0 b4f9a4 on a Windows 10 machine. I have tried both
> auto Baud rate and a fixed baud rate on the radio. Today's attempt was from
> a fresh reboot and WSJT-x was ran before Ham Radio Deluxe or any other
> program that uses the CI-v protocol to talk to the radios. I am able to
> control my Icom 706mk2g with WSJT-x and the same interface but not my
> IC-910.
>
> After noting the failures here, I closed WSJT-x and opened Ham Radio
> Deluxe, It connects to my IC-910 no problem.
>
> I have attached part of my syslog from today's attempt to use the Icom
> 910. One thing I've noticed is that the errors mention both the IC7300 and
> IC9700:
>
> Command rejected by the rig
> [SYSLOG][2025-07-19 16:00:35.121753][00:00:24.063441][error]
> handle_transceiver_failure: reason: Hamlib error:
> **2:ic7300.c(2390):ic9700_set_vfo returning(-9) Command rejected by the rig
>
> Command rejected by the rig
>
> Thanks for any suggestions. 73
>
> Kyle
> K0KN
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> Virus-free.www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> <#m_-7299603936670984440_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> On Sat, Jul 19, 2025 at 2:27 AM Peter Sumner via wsjt-devel <
> wsj...@li...> wrote:
>
>> Hi Kyle,
>>  seems odd for Hamlib to throw an error for a 910 connection, I use it
>> every week in MSK144 skeds without ever seeing an error (i know that does
>> not help you). To check I just updated HAMLIB too, I now have 4.7~git
>> 2025-07-15T in use and that works well too.
>>
>> Are you on Windows X64 or a 32bit version?
>>
>> Can you try a reboot and NOT open HRD before you try WSJT-X to see if it
>> works?
>>
>> Hope you find an answer soon.
>> Peter, VK5PJ
>>
>> On Sat, Jul 19, 2025 at 8:27 AM Kyle Y via wsjt-devel <
>> wsj...@li...> wrote:
>>
>>> [image: image.png]
>>>
>>> Hello,
>>>
>>> I am having trouble using WSJT-x version 2.7.0 with my Icom IC-910.
>>>
>>> I can connect via Ham Radio Deluxe but attempting to connect directly
>>> gives me the following error. Looks like maybe WSJT-x is using the IC-9700
>>> radio info instead of the IC-910. See attached. I updated Hamlib within
>>> WSJT-x to the latest version 4.7~git 2025-0710
>>>
>>> Thanks. 73
>>>
>>> Kyle
>>> K0KN
>>>
>>>
>>>
>>>
>>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>>> Virus-free.www.avast.com
>>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>>> <#m_-7299603936670984440_m_-3255328679627688007_m_2584336365070807127_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>>> _______________________________________________
>>> wsjt-devel mailing list
>>> wsj...@li...
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> _______________________________________________
>> wsjt-devel mailing list
>> wsj...@li...
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>