Re: [wsjt-devel] when starting WSJT-X rig defaults to "ADAT www.adat.ch" and not the wanted rig

[Peter S. <vk...@gm...>]

thanks Wolfgang,

I knew Mike was unwell but had no idea he had passed away, that is quite a
loss for the ham community.

regards,
Peter vk5pj

On Wed, Jul 30, 2025 at 9:13 PM Wolfgang via wsjt-devel <
wsj...@li...> wrote:

> Hello Peter,
>
>
>
> a simple search using 'ReplaceStudio64' will reveal that 'Flrig' or
> 'flrig' string is only in "libhamlib-4.dll"
>
>
>
> Btw., Mike is SK since a while. He may rest in peace.
>
>
>
> 73's de OE1MWW
>
> Wolfgang
>
>
>
> Wednesday, July 30, 2025, 12:39:51 PM, you wrote:
>
>
> Hi,
>  if there is anyone who reads this who is familiar with the source code
> for WSJT-X who could help me identify how the list of rigs in the 'RADIO'
> tab gets populated?  I have been wandering through the source (downloaded a
> tarball from the main WSJT-X web site) but my level of experience is just
> scripting, its all a bit much for me.
>
> My theory at this point is the list of rigs has an error in it or the way
> the list is read has an error.  In ver 2.61 the rig list showed the entry
> for FLrig as being: "FLRig FLRig"  and the INI file shows it as: Rig=FLRig
> FLRig
>
> When I go to one of the 2.7x version, the entry for FLRig is just :
> "FLRig" and in the INI file it is:  Rig="FLRig "
>
> next test...
>
> On my ver 2.61 folder if I change the libhamlib-4.dll to be a newer
> version the wheels fall off with the same problems at startup (radio
> selection goes back to Adat and a com port) I see on ver 2.7x  BUT if I try
> the reverse and install an OLD libhamlib-4.dll into the ver 2.7x folder it
> does not improve things sadly but will recheck this in the morning (8pm
> local and feeling tired)
>
> Does WSJT-X read the list of rigs from the Hamlib DLL file to populate the
> list of rigs on the radio TAB of the Settings screen?  as it feels like
> that is what is happening as when I change the Hamlib DLL's, the entry for
> FLRig changes inside WSJT-X.
>
> If this a Hamlib error, then I guess I need to contact Mike but until I
> can clarify where it is I am lost to know where to look.
>
> Regards,
> Peter vk5pj
>
>
>
> ----------
>
> under construction: https://www.oe1mww.work/
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>