Re: [wsjt-devel] when starting WSJT-X rig defaults to "ADAT www.adat.ch" and not the wanted rig

[Doug B. Sr. <dou...@gm...>]

Great use for AI: have it deal with the configuration for Flrig, Fldigi,
Js8call and Wsjtx.

"AI, I'm going to get a coffee, when I come back, have these all talking to
the radio properly, and have it come up the same way every time things get
posted up. Cheers"



On Sun, Jul 27, 2025, 6:03 PM Peter Sumner via wsjt-devel <
wsj...@li...> wrote:

> Hi Andy,
>  thanks for the link, will have a look there.
>
> Since my original post I have dug deeper and widened my field of testing.
>  I can see on 'other' derivatives of WSJT-X that the rig type is stored as
> "Q65-eme\Configuration\Rig=FLRig FLRig" and not the mangled: Rig="FLRig " I
> see in the current releases of WSJT-X and the Improved version.
>
> It would seem an error has crept into the code base at some point that
> mangles the storage of this parameter when selecting FLRig in the
> Configuration menu.
>
> Regards,
> Peter, vk5pj
>
> On Mon, Jul 28, 2025 at 3:07 AM Andrew Neumeier via wsjt-devel <
> wsj...@li...> wrote:
>
>> Peter,
>>
>> I don't know if this is a wjstx issue or a flrig issue.  If you are
>> unable to rectify your problem with help from this group, may I suggest
>> posing the question to the linuxham group.  I have placed the link below.
>> That group is active and involves the programs created by W1HKJ, including
>> flrig.
>>
>> Best of luck,
>> 73,
>> Andy, ka2uqw
>>
>> https://groups.io/g/linuxham
>>
>>
>>
>>
>>
>> On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via
>> wsjt-devel <wsj...@li...> wrote:
>>
>>
>> Hi,
>>  for some time now (all of the 2.7 variants and now 2.8) when I open
>> WJST-X or swap between configurations, I end up with a rig control error
>> and the current rig is shown to be "ADAT www.adat.ch" and not the
>> previously selected FLRIG setting.
>>
>> I have learned to live with this for a while and today decided I should
>> report this difficulty for evaluation.
>>
>> I use the FLRIG interface as it lets me see on my PC desktop what the
>> SWR, power out and other settings of my two icom rigs as I do a lot of
>> operating from the comfort of the house rather than the 50 metre journey to
>> my shack in the stables shed.
>>
>> So far I have tried an empty INI file a few times and the error occurs
>> with each iteration of testing I do, where I have set up multiple
>> configurations.
>>
>> If I leave it as a SINGLE configuration then there is no error seen. Once
>> I add a second or more configuration using FLRIG as the rig type I start
>> seeing the Rig control error when starting WSJT-X or swapping
>> configurations.
>>
>> When testing, if I use a direct connection (IC-7610) then I can add
>> multiple configurations and not see an error when starting or swapping
>> configs so the error seems to be confined to having FLRIG selected as a rig
>> type.
>>
>> PC is a Windows 10 X64 O/S which is current with all updates.
>>
>> I have noticed that in the WSJT-X.INI file, that FLRig is shown in there
>> with a trailing space and has inverted commas in some instances and in
>> differently in other config (quite a puzzle for me), where as other entries
>> are not shown like that, here are some examples from my BIG ini file that
>> has about 8 configurations in it
>>
>> Rig=Icom IC-7610
>> Rig=FLRig FLRig
>> Rig="FLRig "
>> Rig=FLRig IC-7610(FLRig)
>>
>> hope I have no missed anything, any help would be appreciated
>>
>> Regards,
>> Peter, vk5pj
>> _______________________________________________
>> wsjt-devel mailing list
>> wsj...@li...
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>> _______________________________________________
>> wsjt-devel mailing list
>> wsj...@li...
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>