Menu
▾
▴
Re: [wsjt-devel] when starting WSJT-X rig defaults to "ADAT www.adat.ch" and not the wanted rig
|
From: Andrew N. <ka...@ya...> - 2025-07-27 17:33:08
|
Peter, I don't know if this is a wjstx issue or a flrig issue. If you are unable to rectify your problem with help from this group, may I suggest posing the question to the linuxham group. I have placed the link below. That group is active and involves the programs created by W1HKJ, including flrig. Best of luck,73,Andy, ka2uqw https://groups.io/g/linuxham On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via wsjt-devel <wsj...@li...> wrote: Hi, for some time now (all of the 2.7 variants and now 2.8) when I open WJST-X or swap between configurations, I end up with a rig control error and the current rig is shown to be "ADAT www.adat.ch" and not the previously selected FLRIG setting. I have learned to live with this for a while and today decided I should report this difficulty for evaluation. I use the FLRIG interface as it lets me see on my PC desktop what the SWR, power out and other settings of my two icom rigs as I do a lot of operating from the comfort of the house rather than the 50 metre journey to my shack in the stables shed. So far I have tried an empty INI file a few times and the error occurs with each iteration of testing I do, where I have set up multiple configurations. If I leave it as a SINGLE configuration then there is no error seen. Once I add a second or more configuration using FLRIG as the rig type I start seeing the Rig control error when starting WSJT-X or swapping configurations. When testing, if I use a direct connection (IC-7610) then I can add multiple configurations and not see an error when starting or swapping configs so the error seems to be confined to having FLRIG selected as a rig type. PC is a Windows 10 X64 O/S which is current with all updates. I have noticed that in the WSJT-X.INI file, that FLRig is shown in there with a trailing space and has inverted commas in some instances and in differently in other config (quite a puzzle for me), where as other entries are not shown like that, here are some examples from my BIG ini file that has about 8 configurations in it Rig=Icom IC-7610Rig=FLRig FLRigRig="FLRig "Rig=FLRig IC-7610(FLRig) hope I have no missed anything, any help would be appreciated Regards,Peter, vk5pj_______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel |
