Re: [wsjt-devel] Power Out Issue

[FRANCIS P. SR. <mvp...@co...>]

Menu 017 is TX Out Level. Data Mic Gain is 077 and is currently set at 50. I'm using a SignalLink USB.
The pwr slider on the far right as example if I bring it down to -35db brings my power out to 15 Watts. So I'm under the assumption my problem is solved. Thank you! It's been a few months since I used it.

> On 01/25/2025 9:32 PM EST Reino Talarmo via wsjt-devel <wsj...@li...> wrote:
>  
>  
> 
> Frank,
> 
> Clearly your audio settings require some tuning; there is now an excessive level. Is it a typo, when you refer to menu 017 as that is for Voice memory; the data MIC gain is menu 077?
> 
> What happens when you use wsjt-x Pwr slider on the right hand? Does it start to lower output power at some value. It should as the control range is 40 dB or so.
> 
> How is your audio connected between PC and FTdx1200. Are you using SCU-17?
> 
>  
> 
> 73, Reino OH3mA
> 
>  
> 
> From: FRANCIS PIETLOCK SR. via wsjt-devel <wsj...@li...>
> Sent: Sunday, January 26, 2025 12:23 AM
> To: wsj...@li...
> Cc: FRANCIS PIETLOCK SR. <mvp...@co...>
> Subject: [wsjt-devel] Power Out Issue
> 
>  
> 
> I'm running WSIT-X 2,7,0 RC1 on a Yaesu FT dx 1200.
> 
>  
> 
> I can't seem to get my output lower than 100 watts out on FT8
> 
> Menu 017 reads 57 now. I've lowered it 20 digits & increased it 20 without any changes.
> 
> FYI.. I only use this rig for FT8 and haven't used it in a while and don't recall how to do it.
> 
>  
> 
> Frank WA1UYM
> 
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>