Re: [wsjt-devel] Rig verification

[Jari A <oh...@gm...>]

Hi Mike,

Using TS-790 in TS-711 works, but not properly.


Split operation > Rig = Key tune on - 2 seconds later rig beeps "U" for
usb, at 6'th second tx goes on. No rig qrg change.
Fake it, works immediately and has qrg change

Mode None, and split to rig, causes ~1,5 second delay on tx.

Works almost, but some incompatibilities

Rgds,

: Jari   / oh2fqv


On Thu, Jul 16, 2020 at 7:05 PM Black Michael via wsjt-devel <
wsj...@li...> wrote:

> If you try a TS-790 can you set split mode on the rig?  We need to find
> out if it's supported.
>
> It hasn't been implemented for the TS-711 and I can't find a CAT manual
> for that rig.
>
> Mike W9MDB
>
>
>
>
>
>
>
>
> On Thursday, July 16, 2020, 10:43:53 AM CDT, Jari A <oh...@gm...>
> wrote:
>
>
>
>
>
> TS-711 (2m multimode)
>
> 2.2.2 , error if wstj-x setting is set for rig split. No matter if rig has
> split on or off in the rig.
> Setting, Split operation > Rig: Causes hamlib error.
> If wsjt-x is set for Fake It, rig qrg follows wsjt-x control and changes
> tx qrg according tx offset from wsjt-x
>
>
>
> Rgds, : Jari   / oh2fqv
>
>
> On Thu, Jul 16, 2020 at 6:15 PM Frank Kirschner <kir...@er...>
> wrote:
> > Bill,
> >
> > Thanks. I thought I had done that, but apparently, there was something
> left in memory. I rebooted, and it installed fine.
> >
> > 73,
> > Frank
> > KF6E
> >
> > On Thu, Jul 16, 2020 at 10:54 AM Bill Somerville <g4...@cl...>
> wrote:
> >>
> >>
> >> On 16/07/2020 15:50, Frank Kirschner wrote:
> >>
> >>
> >>> I'm using a Flex 6600 and wsjt-x v 2.1.0. When I select "Rig" as the
> split mode, wsjt-x crashes. I thought it might be that I am using an old
> version of wsjt-x, so I downloaded v.2.2.2. It won't install. I get this
> error:
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Running Win 7 64, i7 with 16 GB.
> >>>
> >>>
> >>>
> >>>
> >>> 73,
> >>>
> >>> Frank
> >>>
> >>> KF6E
> >>>
> >>
> >> Hi Frank,
> >>
> >> shut down all instances of WSJT-X before trying to upgrade.
> >>
> >> 73
> >> Bill
> >> G4WJS.
> >>
> >>
> >> _______________________________________________
> >> wsjt-devel mailing list
> >> wsj...@li...
> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >>
> > _______________________________________________
> > wsjt-devel mailing list
> > wsj...@li...
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>