Re: [wsjt-devel] WSJT-X 2.0.1: Hamlib NET rigctl regression?

[Dave J B. <wb...@gm...>]

This is 2.0.1 - 2.0.0 works fine.


On 3/10/19 6:57 AM, Black Michael via wsjt-devel wrote:
> Fixed in WSJT-X 2.0.1 -- so please upgrade.
>
>
>
>
> On Saturday, March 9, 2019, 10:22:41 PM CST, Dave J Barnes 
> <wb...@gm...> wrote:
>
>
> Rig controlled with Quisk is Multus Proficio SDR.
>
> superman@WB4KDI-0:~$ rigctld-wsjtx -m 2 -r localhost:4532 -vvvvv
> Recommend using --vfo switch for rigctld
> rigctl and netrigctl will automatically detect vfo mode
> rigctld, Hamlib 4.0~git
> Report bugs to <ham...@li...> 
> <mailto:ham...@li...>
>
> rig_init called
> dummy: _init called
> rig_register called
> rig_register: rig_register (1)
> rig_register called
> rig_register: rig_register (2)
> rig_register called
> rig_register: rig_register (4)
> rig_register called
> rig_register: rig_register (5)
> netrigctl_init version 1.1b
> rig_open called
> port_open called
> network_open called
> network_open version 1.0
> netrigctl_open called
> netrigctl_transaction: called len=9
> network_flush called
> network_flush: len <= 0, len=0/0x0
> write_block called
> write_block(): TX 9 bytes
> 0000    5c 63 68 6b 5f 76 66 6f 0a                          \chk_vfo.
> read_string called
> read_string(): RX 8 characters
> 0000    52 50 52 54 20 2d 34 0a                             RPRT -4.
> rig_open: error = Feature not implemented
> superman@WB4KDI-0:~$
>
> On 3/9/19 9:59 PM, Black Michael via wsjt-devel wrote:
> What rig do you have?
>
> If you run rigctld-wstjx with 5 v's you can see what it's doing and 
> let us see it too when it gets the error.
>
> rigctld-wsjtx -r com1 -s 9600 -vvvvv
>
> de Mike W9MDB
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li... <mailto:wsj...@li...>
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsj...@li...
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel