Menu
▾
▴
Re: [wsjt-devel] Urgent Assistance for the IC-7850/7851 and Microkeyer II
|
From: Black M. <mdb...@ya...> - 2018-11-11 13:48:29
|
If the 7851 is like the 7300 then you have to be in USB DATA mode to transmit over the USB interface.You should select Data/Pkt mode in the WSJT-X radio settings.
de Mike W9MDB
On Sunday, November 11, 2018, 1:14:24 AM CST, Stephen Ireland <vk...@ho...> wrote:
Hi Folks,
This may nor may not be the right place to ask – but there is extreme urgency and precision/accuracy of answers are required.
We have an IC-7850 (same as IC7851) that is connected into a MicroKeyer II that we cannot stimulate Tx-output-signal with… (though the Tx is triggering n the radio) … Rx is a lesser issue !!!!
The Keyer is plugged into ACC-1.
We also have an IC-7700 we can get to function with WSJT-X… But the 7850 is proving to be somewhat of a “Cow” to get it working with WSJT-X.
Restating what we do have - we can detect sound out of the Microkeyer via its primary interfaces … We can Receive (IF bandwidths not set right now … but will get there) from there into WSJT-X … We can trigger Tx from WSJT-X but with no power coming out – hence the AF is not being modulated.
All Port settings on the radio are currently assigned to ACC-1 … and no power still out !
There is almost no dedicated and reliable instructions on “The Net” for this top-of-the-range radio, hence the request for me to ask here (at the highest of levels of speciality).
Can someone that works on an IC7850/7851 with WSJT-X with PLEASE post back to me (either directly via vk3sir @ hotmail.com or via the group for all-time prosperity) settings for the 7850/7851…
Please only 7850/7851 users respond as instructions for other radios found out there are unsatisfactory.
Thanks, and my regrets coming at this level for reliable radio configuration settings to all !!!
73
Steve I
Vk3VM / VK3SIR
_______________________________________________
wsjt-devel mailing list
wsj...@li...
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
|
