Menu
▾
▴
Re: [wsjt-devel] Yaesu FT757GX-I CAT problem
|
From: Höss L. <mn...@c2...> - 2018-10-16 17:35:35
|
The original 2.0.0 RC2 version does not work. I have to use a json trick make it work. Normal user will not be able to use this trick. I cannot modify and compile the source. Another developer sent me a trial version (1.10.0) but that does not work either. 2018-10-15 21:53 időpontban Neil Zampella ezt írta: > Why are you using a locally compiled version of 1.9.1. There IS no v1.10.0 as it was a number change for any bug fixes in 1.9.1, there's nothing new in that. > > If v2.0-RC2 works ... use it. > > Neil, KN3ILZ > > On 10/15/2018 2:23 PM, Höss Lajos wrote: > > Hi, > > I tried this version of wsjtx-1.10.0-devel-win32.exe. The CAT system not ok. I get error message, same as WSJT-X unmodified 2.0.0 RC2. Screenshot attached it. > > I know the old radio not support CAT PTT, Simple circuit working ok, usb serial port CTS pin used to PTT. It works normally, if radio = none. With json trick and WSJT-X 2.0.0 RC2 CAT and CTS PTT works ok. > > 73, > > HA8HL > > 2018-10-15 06:27 időpontban Black Michael via wsjt-devel ezt írta: > > Try this version and see how it works for you. > There's no set PTT command though in CAT so you have to have another method for PTT. > > https://www.dropbox.com/s/x1290dsebgf5i2q/wsjtx-1.10.0-devel-win32.exe?dl=1 [2] > > On Friday, October 12, 2018, 2:12:59 PM CDT, Höss Lajos <mn...@c2...> wrote: > > Hi, > > Thank to everybody for a lots of help. Please note, another computer (windows 7 64 bit and another FT-757GX-I used for these test. But no problem, the problem same. > > I attached the radio config setup. The problem occured, when press the test cat button. > > I attached the radio config setup only for PTT. PTT works. > > rigctl-wsjtx.exe -m 107 -r COM8 -s 4800 -vvvvv f >log.txt 2>&1 > > This command executed too, and attached it. Of course com port changed to com3. Two log files, because the radio is FT-757GX-I (hamlib model =106), but the sample requested FT-757GX-II (hamlib model =107). FT-757GX-II probably similar, but real two way serial port exist. > > I test the suggested json quick fix file. Now the CAT system working with WSJT-X 2.0.0 rc2 FT-757(-I) settings. I test frequency change, it works without any problem. > > I not know, this trick will generate errors or no with another rigs, for example Icom 706 MKGII. > > 73, > > Lajos, > > HA8HL > > 2018-10-12 00:48 időpontban Bill Pence ezt írta: > Cool. Thanks. > Please provide "for dummy" instructions for us dumb guys. > > Much appreciated. > > On Thu, Oct 11, 2018, 6:47 PM Black Michael <mdb...@ya...> wrote: > > No....not implemented for it. I am working on the 847 one though. > > Mike > > On Thursday, October 11, 2018, 5:44:36 PM CDT, Bill Pence <pen...@gm...> wrote: > > Would this also work for ft847 early serial that also have 1way cat communicatio no s? > Maybe be a short how to... > > On Thu, Oct 11, 2018, 6:35 PM Black Michael via wsjt-devel <wsj...@li...> wrote: > > Quick fix is to add the hamlib_settings.json file in the same place as your WSJT-X.ini file with the following lines in it > > { > "config": { > "fakefreq": "1" > } > } > > It looks like the real get_freq was never implemented...so I'll see about doing that and contact you off list for testing. > > de Mike W9MDB > > On Thursday, October 11, 2018, 3:47:57 PM CDT, Höss Lajos <mn...@c2...> wrote: > > Hi, > > Thanks the fast reply. > > RIG: Yaesu FT-757GX > > Serial port: COM8 > > Baud rate: 4800 > > Data bits: 8 > > Stop bits: 2 > > Handshake: none > > 73, > > Lajos > > HA8HL > > 2018-10-11 21:37 időpontban Bill Somerville ezt írta: > > On 11/10/2018 20:02, Höss Lajos wrote: > Hi, The CAT control not working with Yaesu FT757GX-I. Wsjt-x 2.0.0 rc2, windows 7 32 bit. The problem, when press the test CAT button i get the error message. Attached it. The problem i think, wsjt-x cannot get the radio frequency. This is normal. This radio has only one way CAT system. Only computer to radio commonucation exist. With another program, the CAT works normal. Best regards, Lajos > > Hi Lajos, > > what settings do you have in WSJT-X "Settings->Radio"? > > 73 > Bill > G4WJS. > > _______________________________________________ > wsjt-devel mailing list > wsj...@li... > https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] ------------------------- c2.hu [3] ingyenes webmail - 10GB TÁRHELY, megújult külsővel! _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] ------------------------- c2.hu [3] ingyenes webmail - 10GB TÁRHELY, megújult külsővel! _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] ------------------------- c2.hu [3] ingyenes webmail - 10GB TÁRHELY, MEGÚJULT KÜLSŐVEL! [4] Virus-free. www.avg.com [4] _______________________________________________ wsjt-devel mailing list wsj...@li... https://lists.sourceforge.net/lists/listinfo/wsjt-devel [1] ------------------------- c2.hu [3] ingyenes webmail - 10GB tárhely, megújult külsővel! Links: ------ [1] https://lists.sourceforge.net/lists/listinfo/wsjt-devel [2] https://www.dropbox.com/s/x1290dsebgf5i2q/wsjtx-1.10.0-devel-win32.exe?dl=0 [3] http://www.c2.hu/ [4] http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient |
