Menu
▾
▴
Re: [wsjt-devel] Yaesu FT757GX-I CAT problem
|
From: Neil Z. <ne...@te...> - 2018-10-15 19:53:34
|
Why are you using a locally compiled version of 1.9.1. There IS no v1.10.0 as it was a number change for any bug fixes in 1.9.1, there's nothing new in that. If v2.0-RC2 works ... use it. Neil, KN3ILZ On 10/15/2018 2:23 PM, Höss Lajos wrote: > > Hi, > > I tried this version of wsjtx-1.10.0-devel-win32.exe. The CAT system > not ok. I get error message, same as WSJT-X unmodified 2.0.0 RC2. > Screenshot attached it. > > I know the old radio not support CAT PTT, Simple circuit working ok, > usb serial port CTS pin used to PTT. It works normally, if radio = > none. With json trick and WSJT-X 2.0.0 RC2 CAT and CTS PTT works ok. > > 73, > > HA8HL > > 2018-10-15 06:27 időpontban Black Michael via wsjt-devel ezt írta: > >> Try this version and see how it works for you. >> There's no set PTT command though in CAT so you have to have another >> method for PTT. >> https://www.dropbox.com/s/x1290dsebgf5i2q/wsjtx-1.10.0-devel-win32.exe?dl=1 >> <https://www.dropbox.com/s/x1290dsebgf5i2q/wsjtx-1.10.0-devel-win32.exe?dl=0> >> On Friday, October 12, 2018, 2:12:59 PM CDT, Höss Lajos <mn...@c2...> >> wrote: >> >> Hi, >> >> Thank to everybody for a lots of help. Please note, another computer >> (windows 7 64 bit and another FT-757GX-I used for these test. But no >> problem, the problem same. >> >> I attached the radio config setup. The problem occured, when press >> the test cat button. >> >> I attached the radio config setup only for PTT. PTT works. >> >> rigctl-wsjtx.exe -m 107 -r COM8 -s 4800 -vvvvv f >log.txt 2>&1 >> >> >> This command executed too, and attached it. Of course com port >> changed to com3. Two log files, because the radio is FT-757GX-I >> (hamlib model =106), but the sample requested FT-757GX-II (hamlib >> model =107). FT-757GX-II probably similar, but real two way serial >> port exist. >> >> I test the suggested json quick fix file. Now the CAT system working >> with WSJT-X 2.0.0 rc2 FT-757(-I) settings. I test frequency change, >> it works without any problem. >> >> I not know, this trick will generate errors or no with another rigs, >> for example Icom 706 MKGII. >> >> 73, >> >> Lajos, >> >> HA8HL >> >> 2018-10-12 00:48 időpontban Bill Pence ezt írta: >> >> Cool. Thanks. >> Please provide "for dummy" instructions for us dumb guys. >> Much appreciated. >> >> On Thu, Oct 11, 2018, 6:47 PM Black Michael <mdb...@ya... >> <mailto:mdb...@ya...>> wrote: >> >> No....not implemented for it. I am working on the 847 one >> though. >> Mike >> On Thursday, October 11, 2018, 5:44:36 PM CDT, Bill Pence >> <pen...@gm... <mailto:pen...@gm...>> wrote: >> Would this also work for ft847 early serial that also have >> 1way cat communicatio no s? >> Maybe be a short how to... >> >> On Thu, Oct 11, 2018, 6:35 PM Black Michael via wsjt-devel >> <wsj...@li... >> <mailto:wsj...@li...>> wrote: >> >> Quick fix is to add the hamlib_settings.json file in the >> same place as your WSJT-X.ini file with the following >> lines in it >> >> { >> "config": { >> "fakefreq": "1" >> } >> } >> >> It looks like the real get_freq was never >> implemented...so I'll see about doing that and contact >> you off list for testing. >> de Mike W9MDB >> On Thursday, October 11, 2018, 3:47:57 PM CDT, Höss Lajos >> <mn...@c2... <mailto:mn...@c2...>> wrote: >> >> Hi, >> >> Thanks the fast reply. >> >> RIG: Yaesu FT-757GX >> >> Serial port: COM8 >> >> Baud rate: 4800 >> >> Data bits: 8 >> >> Stop bits: 2 >> >> Handshake: none >> >> 73, >> >> Lajos >> >> HA8HL >> >> 2018-10-11 21:37 időpontban Bill Somerville ezt írta: >> >> On 11/10/2018 20:02, Höss Lajos wrote: >> >> Hi, The CAT control not working with Yaesu >> FT757GX-I. Wsjt-x 2.0.0 rc2, windows 7 32 bit. >> The problem, when press the test CAT button i get >> the error message. Attached it. The problem i >> think, wsjt-x cannot get the radio frequency. >> This is normal. This radio has only one way CAT >> system. Only computer to radio commonucation >> exist. With another program, the CAT works >> normal. Best regards, Lajos >> >> Hi Lajos, >> >> what settings do you have in WSJT-X "Settings->Radio"? >> >> 73 >> Bill >> G4WJS. >> >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> ------------------------------------------------------------------------ >> c2.hu <http://www.c2.hu/> ingyenes webmail - *10GB >> tárhely*, megújult külsővel! >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> ------------------------------------------------------------------------ >> c2.hu <http://www.c2.hu/> ingyenes webmail - *10GB tárhely*, megújult >> külsővel! >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> _______________________________________________ >> wsjt-devel mailing list >> wsj...@li... >> <mailto:wsj...@li...> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > ------------------------------------------------------------------------ > c2.hu <http://www.c2.hu/> ingyenes webmail - *10GB tárhely, megújult > külsővel! * --- This email has been checked for viruses by AVG. https://www.avg.com |
