Re: [wsjt-devel] Yaesu FT757GX-I CAT problem

[Black M. <mdb...@ya...>]

Quick fix is to add the hamlib_settings.json file in the same place as your WSJT-X.ini file with the following lines in it

{
    "config": {
        "fakefreq": "1"
    }
}It looks like the real get_freq was never implemented...so I'll see about doing that and contact you off list for testing.
de Mike W9MDB

 

    On Thursday, October 11, 2018, 3:47:57 PM CDT, Höss Lajos <mn...@c2...> wrote:  
 
 
Hi,

Thanks the fast reply.

RIG: Yaesu FT-757GX

Serial port: COM8

Baud rate: 4800

Data bits: 8

Stop bits: 2

Handshake: none

73,

Lajos

HA8HL

 

2018-10-11 21:37 időpontban Bill Somerville ezt írta:

On 11/10/2018 20:02, Höss Lajos wrote:
Hi, The CAT control not working with Yaesu FT757GX-I. Wsjt-x 2.0.0 rc2, windows 7 32 bit. The problem, when press the test CAT button i get the error message. Attached it. The problem i think, wsjt-x cannot get the radio frequency. This is normal. This radio has only one way CAT system. Only computer to radio commonucation exist. With another program, the CAT works normal. Best regards, Lajos
Hi Lajos,

what settings do you have in WSJT-X "Settings->Radio"?

73
Bill
G4WJS.



_______________________________________________
wsjt-devel mailing list
wsj...@li...
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


 
 
c2.hu ingyenes webmail - 10GB tárhely, megújult külsővel!_______________________________________________
wsjt-devel mailing list
wsj...@li...
https://lists.sourceforge.net/lists/listinfo/wsjt-devel